Це відео не доступне.
Перепрошуємо.
How to Guide: Disable ANY Subaru Seat belt chime
Вставка
- Опубліковано 27 вер 2018
- This is a quick how to guide on disabling ANY seat belt chime on any model Subaru.
This includes both keyed and keyless models.
I can confirm this works on the following vehicles:
2000-2004 Subaru Outback
2005-2009 Subaru Outback
2003-2006 Subaru Baja
2015-2019 Subaru Outback
1998-2002 Subaru Forester
2003-2008 Subaru Forester
If this doesn't work on any Subaru vehicle PLEASE let me know in the comments and I will correct it.
At this time, I assume it works on all models.
It just worked on my 2023 wilderness. I wasn’t setting in the seat. I pushed the start button 2xs then clicked 20xs then turned car off. All while not sitting in drivers seat. Then pushed start and it worked. Took me most of the day trying to figure this out. You video and comments from others helped so much thank you!
Thank you so much. You are my savior
Came here to say thank you to this comment. I did exactly as you suggested and also worked with my 2023 wilderness
Thought I was being trolled. Tried it. Didn't work. Figured I'd try it again. A pleasant surprise... worked perfectly. Thank you!
This worked on my 2020 Forester with the push button start. After numerous tries I tried it by not sitting in the seat while doing the 20 clicks and it finally worked !
You're awesome.
Thank you!! I just did this on my 21 Forester. That chime is beyond obnoxious, and it would come on at full blast almost as soon as I started moving.
Did it disable your cruise control?
@@dirtrider8e when I did this in my 2022 forester, the chime was disabled, but it also disabled my cruise control.
WORKS.....Best explanation on what to do and 30 seconds to do it.......on the 2023 Forester it disables cruise control and the auto start/stop annoyance until you buckle up then they both work and NO Chimes!!!.............Thank You
Omg THANK YOU SO MUCH this chime was driving me crazy on my 05 Legacy 5speed. Got it on my first try too ☺️
I understand if it would chime when u realease the parking brake or start moving but it is ridiculous to go off every 10 seconds when you're just sitting there at idle!!
Works great on my 2022 outback wilderness, one thing thats important though with mine is turning the ignition off after you do the 20 clicks.
Now tells us where the dinger is at so we can drill the speaker 🤣
🤣🤣🤣
Speaker is in the speedometer cluster. It can be removed.
Took three tries in my 2023 Forester Wilderness but I got it to work! I was not in my seat when I started and got to clicking immediately the turned off the car without getting in. I shut the door and opened it to get in and voila! Thank you!
Oh my gosh, it worked! That seatbelt chime is the most irritating thing ever! If I was driving really slowly through a parking lot once it came on loud, it wouldn’t even stop when I stopped the car or put it in park. I drive a 2023 Forrester.
I have a 2019 outback and it wasn’t working no matter how many times I tried UNTIL I tried doing it without sitting in the seat. And bam! It worked! Thanks!
Did you have to do each seat separately?
It still beeps the first 5 times when you turn on the car too right? I did it 20x in 30seconds and 25x in 30 seconds. Going to try 19 and 21x just to see if I am counting wrong. It has not stopped the first round of 5 beeps for me in any scenario.
It always beeps initially when starting the car.
@@bruceyyyyy If you ever figure out how to take out the dash and remove all the beepers... door, lift gate, driving with the car off, seatbelt, lmk and I will venmo you $20.
I showed pictures for this process on a 2007 outback on the forums. Unfortunately, that car was easy (only 1 chimer) and this car I think is using speakers to emit the various noises.
This! The missing detail for me was to do it without sitting in the seat. This comment was the first time I saw that mentioned. Mine is a 2018 outback. Thanks for the info!
thank you baby jesus for this video!!! i live down a dirt road and i don’t feel like wearing the seatbelt until im on the main road! dont tell me what to do subaru!
yeeeiiii worked on my 2006forester
Took me about eight tries to get it to work but then it worked and I’m so stoked!!!!
Worked first time on my 06 Forester manual. 🙏. Like people have said, key turned to ON position, I didn't sit in the seat while doing it and made sure it was at least 20x.
Thanks buddy! You’re video is the only one that worked for me. 2015 Subaru Outback. Solid job thanks again
Worked on my 08 Outback 2.5 XT Limited. The chime would sound even when the
seat belt was buckled, but now it's quiet! Thanks for the fix!
Same issue with this subaru legacy rental car. It chimes every time i go around a corner even with the seatbelt on.
@Catjumped1 It's Permanent, as long as the battery doesn't die. You will have to redo it if you replace battery or it dies.
This works for my 2022 Outback. Took me a few tries. Got to remember to turn off acc power after the 20 clicks before starting the car.
Came across this video looking for something else and tried it just bc I'm skeptical....sure enough it worked 🤣
Thought this was a joke. Tried it anyways. No more seat belt alert. Thanks! 2022 Forester Sport.
Worked in my 2007
Subaru Impreza. Had to be outa the seat, would not work sitting in the seat. Wish I could give more than one thumbs up.
It worked after numerous times trying. I did it 25 times just to make sure
Thanks for the instruction. Worked like a charm, even on my 2018 Impreza 👍👍👍
Thank you, thank you! My 2016 Crosstrek started going off last night despite the fact that it was buckled. Non-stop!! Now the light still indicates it's not bucked (it is) but at least it's not binging!!
Took 3 times. Beautiful. Thank you.
Worked on my 2005 Subaru outback! It wont work if you turn it all the way on. Have it turned to the click just before turning it on and do the 20:30 ratio. Drove me nuts when it wasnt working while I was trying it with the gas on lol
Worked on my 23 Outback 😃😃😃 my chime was going off when my front and back passengers had they seat belt on 😫😫😫 ... thank you for the video
thats fricking hilarious. worked like a charm on my 22 forester sport. i cant even begin to tell you how irking it is to hear that chime and it gets obnoxiously loud the longer you take to buckle up. and were not even talking about purposefully not trying to buckle up, it could be a moving start or even slow disembark for rear passengers. you by chance have a trick to disable that them there dtrls 😃🤔😏.
Worked on my girlfriends 2014 impreza sport 🤙
Thank you!!!!!!!!! The dinger would be ok if it stopped when the car stopped.
Will try this tomorw. I swear subaru has some crazy control issues. That alarm is bullshit. I hope it works for passenger seat too
Worked on my 2023 Subaru ascent. Took a few tries, not sure why. When it finally worked, I did it sitting in the driver's seat, with the driver's seat belt, hit the push button start twice without my foot on the brake to get accessory then on mode, did 31 seat belt clicks for good measure, and then turned off the car.
Thanks. Took some tries but got er done on my 2017 outback.
Worked first try on my 2018 STI. Thanks!
Please tell me if it also turns off flashing light not just the ding noise
Thank you!! Man was that obnoxious
For my 2006 Outback XT could not be sitting in the seat and then it would work. Also worked when the passenger seat was removed! Probably just having the connections disconnected helped it to work. Try it not being in the seat and see what happens.
Got it to work on my 2021 legacy🙏🏽thank you
thanks - worked on my 2019 outback.
Oh, so maybe not doing the drivers seat while sitting in it? I cant get this to work on my 23 onyx, but im sitting in it and doing the drivers seat is that the issue?
Anyway to disable the rear seat belt chime?
Will this work for rear seats?
Worked first try! 21 Forester.
Thank you, my hips can't take the pain of the seat belt pushing on them. It's so painful but not as painful as listening to the chimes. blessings
Worked the next time I started it a day later, no chimes.
I can’t get this to work for my 2024. Any ideas? 😭😭
Was about to pull the wiring and jump the connection but I'll try this first.
It's worked on every Subaru I've ever tried it on.
@@bruceyyyyy Tried twice so far ,(2013 Impreza) with no luck...
How do I disable the rear seat chimer in the Outback Wilderness?
You are the man!!! 09 forester w/key ignition
Used to do this all the time no problem on my '02 and '04 Outbacks. Can not get it to work on my current '03 Limited.
this worked! now, how do I disable the annoying chime that happens about 50% of the time when I turn off the vehicle and open my door? I can't figure out what it's trying to tell me.
Glad I could help!
I think that's a "you left your key in the ignition" chime?
For posterity, what year and model is yours? I forget.
do you happen to know how to turn off the REAR seatbelt reminder for the 2021 outback? this works for the front but doesn’t disable for the rear sensor. please let me know, thanks!
Same issue I'm having. Worked for the front but not the back. My dog sets the back off constantly
@@jenciemiewicz4131 did you ever figure out how to disable the back seat alarm? I have a big dog that is setting it off.
Took me 2 tries, you got to turn the accessories off after the 20 clicks, then start it and it will work, 2019 crosstrek
How do you turn the car off after you do the sequence with a keyless start?
Hit the button again.
Worked on my Crosstrek
HELP! I have a 2023 Subaru Solterra and this does not work and it is driving me crazy. I tried it while I sat in the driver's seat and the passenger seat. Still beeping...please help
That might be one of the few I can't confirm.
Worked on my 2018 Forester SJ manual. Thanks!
This worked for my front seats, but still chimes if the back seats are not buckled. Especially annoying if you have packages on the back. Any suggestions?
I think you can turn off the back seat from the consol in the Outback Gen 6..could be wrong
How do you reverse it if you want it back on ?
Just do the procedure again.
What do you say @00:43? “Once the vehicle started?” I tried this multiple times on my 2018 Crosstrek but no dice, I can’t turn it off. Does it have to be done in the first 30 seconds right after you turn the ignition on?
Turn the car on but don't start it.
And yes, the first 30 seconds.
@@bruceyyyyy ditto, 2020 outback doesn't work, have tried several times :(
I've confirmed it works on a 2020 but will reconfirm.
I have an Ascent and I can't disable back seats. ?
Oh god, thank you for this tip!!!!!
Didn’t work on 2024 Outback 😢
Not sure why this doesn’t work every time I do it it shows the seatbelt light after the 20 clicks and then it continues to beep as soon as I move the car
So the trick is you have to leave the seatbelt clicked in on an extra 21st click, shut it off, then it will allow you to keep it off
2007 legacy if it matters for anyone
2021 crosstrek excellent 👌
Does this work for the passenger seat as well?
Yes
@@bruceyyyyy but only "controlled" by the drivers seatbelt.
I have a New 2019 Ascent with a push button. I tried it twice after pushing the button twice without my foot on the break (car not started) and no luck. I tried it with just pushing the button once and it is not working yet.
Did i read correctly in one of the reply you have do all of the following in 0:30 seconds;
press the button twice
Buckle and Unbuckle the Driver seat-belt 20 times
press the button one more time?
Or do you just need to do the buckle and un-buckle 20 times in 0:30 seconds?
I agree with others how do I get the chime to stop after I have turned the car off and open the drives door. I know it is not the alarm that I left the key in the ignition because I have push start ignition. This has to be one of the most annoying features in the car.
I can't confirm it works on an Ascent but it's worked on every Subaru I've worked on for 20 years.
You just need to buckle 20 times in 30 seconds.
Is this permanent or temporary? Can you turn it back on later? My big ol' husky-malamute sets off all 3 seatbelt sensors so I hope I won't have to do this evey time.
Semi permanent. Until the battery is disconnected.
This method works for my driver’s side but not passenger. My local shop said no way to do it. Probably afraid of liability. Looking for a method that doesn’t require disassembly of dash panel to find the speaker. Too invasive
Can this be undone via the same process?
Yes. Or disconnect the battery.
2024 Crosstrek (Onyx) didn’t work.
Does this disable the back seat chimes?
On a 2022 outback
Once I do this cool mod, is there another way to disable the shattered windshield and life threatening injuries after I'm ejected in a crash?
Of course. Wear your seatbelt and drive defensively.
@@bruceyyyyy I'm confused why are you telling people how to do this if you realize the importance of wearing a seatbelt?
I'm pro choice.
@@bruceyyyyy fair
@@dantecusolito8513 LIve on a mile long very bumpy dirt track. Belted, you don't have freedom to let the car rock under you as you ride the bumps. Listening to that for a mile at 10mph gets you ready for road rage the minue you hit the main road@#!!**!! Anyone with any sense belts up immediately (and automatically ,out of habit) the moment they get on a road where they are doing any sort of speed and likely to meet other traffic. THIS is why choice is important - rigid procedures DO NOT meet all conditions and needs. Common sense MUST be accommodated - unless we all want to be lobotomised!!
Worked on my 21 Ascent
Tried this multiple times on my euro-spec 2013 legacy with push button start. No luck for me
Boo. It weighs for US models of that year for sure.
Thank you! I hate that the stupid chime continues to go off even after I put the car in park.
How to turn it on again ?
Follow the same process. Or disconnect the battery.
do you have to do this everytime?
No.
I gotta try that! Thanks for sharing
Tried it. Didn’t work for me.
What vehicles is it?
bruceyyyyy 2008 Liberty 2.5 SOHC. Australian model
Hmm. It's possible that it's only for US Spec vehicles. I have had this work on a 2005-2009 Legacy Outback. I would assume it would work for yours too.
I will try to confirm for you.
In the meantime, could you try again?
Some models the chime and dash board light still come on for a few moments but go away quickly and don't stay.
Let me know, thanks!
bruceyyyyy will try again next time I’m out and let you know
Does NOT work for my 2011 Forester in Australia😢
Darn. I've been trying with my 2011 Forestery in UK. No luck so far. ONE THING- in the video he does not finish with what next - e.g. some say turn off the ignition and take the key out.,,
Is this for only the seat you do the 20x buckle or does it disable entire vehicle
Both front seats in my experience
@@bruceyyyyy trying to disable rear
Should work. Give it a shot.
So cool. My wish is that you make a video of how to Temporary remove A front passenger seat and keep the airbags intact a 2015 outback Limited
Subaru says this is not possible that it would turn off my airbags all together ???? Pretty Please. 💕🦋💜🙏
This is an interesting project.
Subaru is "right" and there is an airbag in the seat.
My first thought is to disconnect the airbag connection at the seat and measure the resistance.
Then build a box to connect to the connection on the car using the correct ohms the car is looking for.
Since the seat folds flat I'm curious what you're putting there?
@@bruceyyyyy I sleep behind my passenger seat. I use the seat behind the driver to use as a hang out place in the rain, My CFX IM55 Dometic is in the back left side trunk. I also need room for my 100lbss German too sleep.
I love off grid carcamping in all weather.
Well, that makes sense.
The absolute whackiest way would be to remove the airbag from the seat and leave it connected.
I don't like that idea much though. In the event of an accident it would deploy into... Nothing.
But the resistance circuit box tricking the airbag computer into thinking it's there doesn't have this downside.
@@bruceyyyyy thank you
This doesn't work on a 2022 Outback. Tried it 4 times. It doesn't work
Not working on my 2018 Forester. 😔
No work on my 2021 ascent
DOES THIS WORK ON A WRX 2004 ........?
I believe so yes.
Hello it's not working for me because my new car did not come with a key ,
I have push a start
With 2 Fobs
I showed how to use it for the push button start models.
Same here , did not want for my new car
Worked on my 2019 outback! I was dying to shut it up
Didn't work on my 2019 Forester Touring. Tried several times, even using a stopwatch to be sure I was under 30 seconds.
That's odd. I've had others tell me this worked on their 2019 Forester.
I wonder what's different?
Omgoodness the ding!! I'm moving and I cant access my passenger seat belt due to all the stuff make it stop LOL
The fact that you started the "button start" Subaru vehicle at the beginning of your video throws me off. Later, when you hit the ignition button twice, you're not starting the vehicle, correct? If not, are you starting the seat belt lock/unlock (20x) procedure without starting the vehicle? Just before you started the actual 20x procedure, I could've sworn that I heard you say "Once your vehicle's started." Anyway, I performed the 20x procedure countless times -- while the vehicle was not running -- and ended up listening to that nightmare chime more than any human should ever have to! I swear to you, I was ready to start yanking anything I could get my hands on, underneath the dash, to stop that chime. Not only does it repeat forever, but it actually gets louder at a certain point! My God, we actually bought a car that wants to teach us a lesson... I really hope that I never cross their "Safety Design Engineer's" path!
I should have said "once the ignition is on" you're right!
What vehicle is it? I've had it work on every Subaru I've tried it on.
@@bruceyyyyy It's a very nice Black 2019 Subaru Outback 3.6R. If they would've kept the safety freaks out of the engineering lab, it would be a much better vehicle.
Didn't work. Did for 2013 model but it didn't for the 2016 model.
I do a lot of off-roading and slow stop and bouldering a little bit with my gnarly tires and I'm getting a lift kit but I cannot live with this time I need to turn it off!
Can you try again?
It worked on my 2015 & 2017.
So to re able alarm, do same thing?
Nice vid always entertaining
Correct!
Will this work on the wife’s 2014 Impreza you think? Cheers!
I an pretty sure it will. It's worked on every car I've tried it on.
Give it a shot and let me know!
Worked!
Didn't work on forester 2012
Do you have to do each seat separately?
No
@@bruceyyyyy I may sound crazy but on 21 Ascent I had to do each seat.
Does NOT work on my 2023 OB! A waste of time.
Let’s see if it actually works
Doesn't work on Subaru legacy 2017
Try again. I've done it on that exact car.
I've done this, it worked until I turned the car off and got back in. Wasn't a permanent fix I found. You have to do it each time you start the car it seems.
That's odd. Mine lasts until I disconnect the battery.
bruceyyyyy so I've heard. My car is weird... 😒
@@RandallW20 which car?
Didn’t work!!! Ahhh this is so frustrating!!
All it did was turn off the display saying the passenger seatbelt, chime still goes off!
That's a new one. What car is this on?