I run and aircon business and I apply my chemical with a spray bottles. My question is what is the smallest pressure washer I can use with your downstream injector
You should really do a video of different setups like cargo trailer, utility trailer, and bay wash with what would work best with all your different lances
How is this compared to a foam gun? Or to the injector that comes with eg. a Kranzle powerwasher? I am a bit concerned that the foam wont be that thick, since those systems are running with a lower pressure?
Hello. I am more than likely going to order this and If I like it, I will upgrade to 'the real deal'. I have a couple questions. I'm going to get this and the 32oz stars and stripes. Using this, what is the easiest way to switch from stripes back to regular water to rinse? I assume just remove the suction hose from the stripes?
Thank you I appreciate it! So this injector will shut off on its own by removing the foam nozzle and putting the high psi nozzle back on, however because it has such a slow draw rate it’s not as good at applying two step soaps as two foam cannons would be, I’d point you in that direction for trying out Stars and Stripes.
@@ChemX Thanks for the reply. I see what you are saying. Another reason for going this route was that I was hoping it would work for other products if S&S did not end up working out for me. I already have a foam cannon and find it to be a PITA haha. I of course want to have the best outcome possible though, so I guess I'll go that route :( One more question, I only wash when the surface is cool as I learnt my lesson on that in the past lol. Should I wet the surface first or is it better/no difference to just go ahead with stars without wetting?
lol cool yeah you could use one cannon for the presoak then this style one on the neutralizer maybe 🤔 is always a good idea to prerinse in my opinion, although I don’t usually unless it’s hot and sunny outside and I’m washing polished aluminum
Question? The boars 🐗 hair brush, not working for me. I’m not liking it. Swivels too much......could I remove the foamer nozzle from it just so that I have the foamer nozzle itself?
Yep they are cross compatible, also you could hard pipe the brush so it doesn’t swivel, just make it into its own dedicated lance with a quick disconnect at the trigger outlet
Not really, here is a link for the two step version, and no need for 5g pails with this it will add the water for you: www.chem-x.com/products/the-real-deal-kit-stars-stripes-edition
@@ChemX thanks brother will be ordering soon. I can’t believe I haven’t heard of this till now. Why on earth do foam canons exist haha. I mean I know they have their place but geez if I could do without a foam cannon it’s a no brainer! Love the ease and functionality!
Makes my day to hear that bud, I’ll be making some content soon about the difference between standard foam cannons and this set of hardware, I think that’ll be fun😁
I run and aircon business and I apply my chemical with a spray bottles. My question is what is the smallest pressure washer I can use with your downstream injector
Whats the flowrate and pressure of the pump you're using for this injector?
You should really do a video of different setups like cargo trailer, utility trailer, and bay wash with what would work best with all your different lances
That’s a solid idea I’ll have to do that soon
Does the injector generate any restrictions in the water when you use the high pressure nozzle?
Hello, I would like to ask you that how to switch between only water pressure and foam, thank you very much from Thailand
Awesome man..I kinda like this vs. a cannon😎
It’s a sweet set up definitely an upgrade 🍻❌😎
Looking to get this does the small foamer have a Mesh Gauze like the regular snow foam lances please
It has the exact same style stainless foam agitator as normal foam cannons actually
How is this compared to a foam gun? Or to the injector that comes with eg. a Kranzle powerwasher? I am a bit concerned that the foam wont be that thick, since those systems are running with a lower pressure?
Bad ass I will be getting in touch!!!
Hello. I am more than likely going to order this and If I like it, I will upgrade to 'the real deal'. I have a couple questions. I'm going to get this and the 32oz stars and stripes. Using this, what is the easiest way to switch from stripes back to regular water to rinse? I assume just remove the suction hose from the stripes?
Thank you I appreciate it! So this injector will shut off on its own by removing the foam nozzle and putting the high psi nozzle back on, however because it has such a slow draw rate it’s not as good at applying two step soaps as two foam cannons would be, I’d point you in that direction for trying out Stars and Stripes.
@@ChemX Thanks for the reply. I see what you are saying. Another reason for going this route was that I was hoping it would work for other products if S&S did not end up working out for me. I already have a foam cannon and find it to be a PITA haha. I of course want to have the best outcome possible though, so I guess I'll go that route :(
One more question, I only wash when the surface is cool as I learnt my lesson on that in the past lol. Should I wet the surface first or is it better/no difference to just go ahead with stars without wetting?
lol cool yeah you could use one cannon for the presoak then this style one on the neutralizer maybe 🤔 is always a good idea to prerinse in my opinion, although I don’t usually unless it’s hot and sunny outside and I’m washing polished aluminum
I love what you do. But I’m just starting out I need a affordable starter kit. What do you recommend?
Will this work with an electric pressure washer what are minimum gpm and psi requirements this would definitely save me time Detailing cars
Yeah I primarily use this on electric machines, 1gpm@1000psi minimum, better foam tho at around at least 2-3gpm and 1500psi generally
@@ChemX so if i buy it for a 1 gpm 1200psi machine once i get a 2 gallon machine will i need to modify anything on it?
That would depend on the psi of the 2gpm unit, but it would be close regardless and if you need to resize it that’s totally something we can help with
but everytime you need to go to the preasure washe and turn on this injector ?
This injector is operated at the gun by psi shift just like any downstreamer
Can you ship to the UK?
Question? The boars 🐗 hair brush, not working for me. I’m not liking it. Swivels too much......could I remove the foamer nozzle from it just so that I have the foamer nozzle itself?
Yep they are cross compatible, also you could hard pipe the brush so it doesn’t swivel, just make it into its own dedicated lance with a quick disconnect at the trigger outlet
Chem-X ok......thank you!!! I do have the st-160 that I bought from you. So now I’ll have two dedicated foam nozzles.......
Cool yeah give us a shout at 8006245403 next week if ya need anything at all bud
How do I order 1 ?
Cara pesan produk bagaimana? Saya dari negara Indonesia
Will this work with stars and stripes in the 5 gallon pails?
Not really, here is a link for the two step version, and no need for 5g pails with this it will add the water for you: www.chem-x.com/products/the-real-deal-kit-stars-stripes-edition
Price
Can this be used with other different soap brands?
Totally this can run anything, you can set the draw strength anywhere from 12:1 to 200:1 for the perfect strength for what soap you like
@@ChemX thanks brother will be ordering soon. I can’t believe I haven’t heard of this till now. Why on earth do foam canons exist haha. I mean I know they have their place but geez if I could do without a foam cannon it’s a no brainer! Love the ease and functionality!
Makes my day to hear that bud, I’ll be making some content soon about the difference between standard foam cannons and this set of hardware, I think that’ll be fun😁
@@ChemX Man I’m pumped. I think that vid would be awesome 👍 Sending you an email. Should hit your inbox in about 20 min. Hope to hear back from you!
Thanks man!😁👏🍻
How much and where can I get one
I sell these on my website for $229 delivered, the link is in the description
Do you supply this to UK 🇬🇧 market?
No unfortunately I’m only set up to ship within the United States still!
You can buy this in the UK,it looks like a suttner kit
No way that injector is pulling 100:1 and getting that much foam. I bet its 20:1 to 10:1.
This is for a business?
This would work at both a business or in a normal consumer setting
340 bones!?!? holy! cool product tho
my foam nozzle can make foam better