Bought one several months ago. Trim the tube as need3d to allow the weighted ball to fall to the front or wherever you want it to fall. Decent enough, its still in third place behind my MJJC Pro V2 and Griots Brilliant Finish so far as performance is concerned. No jank in mine.
Guaranteed everyone experiences the foam cannon upper portion of the clear adjuster knob and lower screw on clear cap cracking like all the other clear plastic upper/lower models on the market. Something about the clear plastic uppers formulation for parts that come in contact with the metal upper screw or lower fitting piece cause it to become brittle after repeated use. I've had 3 different versions i.e. Raincovo, Bear Force, and Power Town. Ended up frankensteining these specific upper parts from other cheap models that were not translucent and have no further issue. All of the ones I purchased function and work just as good as an $80+ foam cannon using an electric Active VE52 pressure washer.
Can you please do a video on how to fix the MJJC foam cannon. I have V3 and its acting funny too. I changed the filters and cleaned. I ran some Green Star through it so it can clean but still not throwing out the suds.
I bought it for $15.8 at aliexpress, I also have MJJC pro v2. There is nothing wrong with the bear force, I don't know how long it's going to last but the quality is good enough maybe 80% of the MJJC, the foam is great, nothing to complain about.
The spray pattern does adjust from horizontal to vertical its just super stiff, thought i was going to break mine until it eventually moved. Still trying to get best results out of mine think i will try the 1.1mm next. Great value for money cannon and looks great on the shelf. Thx for the review.
loving these quickfire reviews Jamie, keep up the great work! also, are you still using P&S absolute as a drying aid? I'm really tempted to try it out (only as a drying aid, i never do rinseless washing as water is never an issue in my country) after watching your short on it
Optimistic question - Can you disassemble and show the foam maker replacement procedure on video for this newer Bear Force cannon?? The older model's foam maker bit cannot be unscrewed no matter what i tried. 🙃 (I probably accidentally corrosion welded it shut after a bad weekend)
Mine came with 1.25 and 1.40 for some reason…once i put a 1.10 in it put out some really thick foam I put up a short on my page of me using it with Adams mega foam
@@wescat2 what pressure washer are you using? I got the little ryobi 1800psi and my bear force didn’t foam that good with the 1.25 orifice but once I swapped a 1.10 in it it foamed up really good check the short video on my page of it paired with Adams mega foam
Lol I remember cars with keav reviewed this and I was about to get it until I saw it going for 40 bucks and just bought the MJJC v3 instead if I was spending that kind of money
I think we may have reached peak foam cannon. MTM still a favorite despite its ugly bottle. Griots may be better, but I’m not a fan of the insert to control dilution. I would prefer a dial like the others. I do like the option for a small mouth bottle on the GG so I can use different size water bottles and have multiple for different soaps. The MJJC may have better foam than the MTM, but only because it uses more product. That clear bottle with it owns thread is a hard no. You have to buy from them when it breaks and a clear hard plastic bottle will break. Thanks for testing all these so we can be happy with what we already have and save our money by not chasing something better, which it may not be.
Bearforce was $26 till the UA-cam rounds. It'll be $70 by next week 🤣It's good for what it is. Stainless is a bit more, but worth it for a backup or Alkaline only since it foams thin.
@@DAT-TEXAS-DUDE I use the MTM Hydro. Also, there’s a huge difference between companies developing products and having them manufactured in china and chinese companies blatantly ripping off other companies’ products.
Bought one several months ago. Trim the tube as need3d to allow the weighted ball to fall to the front or wherever you want it to fall. Decent enough, its still in third place behind my MJJC Pro V2 and Griots Brilliant Finish so far as performance is concerned. No jank in mine.
O trim the tube good tips 💪🧼
Guaranteed everyone experiences the foam cannon upper portion of the clear adjuster knob and lower screw on clear cap cracking like all the other clear plastic upper/lower models on the market. Something about the clear plastic uppers formulation for parts that come in contact with the metal upper screw or lower fitting piece cause it to become brittle after repeated use. I've had 3 different versions i.e. Raincovo, Bear Force, and Power Town. Ended up frankensteining these specific upper parts from other cheap models that were not translucent and have no further issue. All of the ones I purchased function and work just as good as an $80+ foam cannon using an electric Active VE52 pressure washer.
That aluminum step you are using for a table, could you show us more and tell us where we can get one . Thanks.
Can you please do a video on how to fix the MJJC foam cannon. I have V3 and its acting funny too. I changed the filters and cleaned. I ran some Green Star through it so it can clean but still not throwing out the suds.
Yes Jamie do this video. I have a V3 with no issues at all but would love to see it broken down with a before and after spray test
I bought it for $15.8 at aliexpress, I also have MJJC pro v2. There is nothing wrong with the bear force, I don't know how long it's going to last but the quality is good enough maybe 80% of the MJJC, the foam is great, nothing to complain about.
The spray pattern does adjust from horizontal to vertical its just super stiff, thought i was going to break mine until it eventually moved. Still trying to get best results out of mine think i will try the 1.1mm next. Great value for money cannon and looks great on the shelf. Thx for the review.
Alright thanks 👍 Yeah I might go ahead and try the 1.1 trim the tube some and this thing should be golden
Did you turn the tip or the red plastic part?
Do you have bear force short water pressure gun and would that fit to mjjc s v3.0 without an adopter?
I prefer the AOCISKA Foam Cannon; effective, inexpensive, and beautiful
All clear. For that price wouldn't care.
All you need is a good pressure washer now 😆 🤣
loving these quickfire reviews Jamie, keep up the great work! also, are you still using P&S absolute as a drying aid? I'm really tempted to try it out (only as a drying aid, i never do rinseless washing as water is never an issue in my country) after watching your short on it
Yep my go to drying aid 💪🧼
@@JamieTheCleaner good stuff man, i'll get some ordered today :) thanks
AR blue for the win!
The back piece is suppose to adjust vertical and horizontal! The tension on it is really hard
Alright I’ll keep playing with it and loosen it up lol
Optimistic question - Can you disassemble and show the foam maker replacement procedure on video for this newer Bear Force cannon?? The older model's foam maker bit cannot be unscrewed no matter what i tried. 🙃 (I probably accidentally corrosion welded it shut after a bad weekend)
Mine came with 1.25 and 1.40 for some reason…once i put a 1.10 in it put out some really thick foam I put up a short on my page of me using it with Adams mega foam
I have a bearforce foam cannon but the first ones made . I got mine 4 years ago and its a frost white looking color still you can see the chemicals
Great review Jamie! Foamed good but not great! Definitely better than most foam cannons other sell at a $50 price point. There’s some Jank to it ☠️🤣
He said jank send that back bro - mine is sooo good haha 😂
I always get the janky version bruh 🫠💪
@@JamieTheCleaner send that trash back looks like griots before I fixed it
😂
@@EcdetailsWhat did you do to fix yours? Mine is underwhelming.
@@wescat2 what pressure washer are you using? I got the little ryobi 1800psi and my bear force didn’t foam that good with the 1.25 orifice but once I swapped a 1.10 in it it foamed up really good check the short video on my page of it paired with Adams mega foam
So far my favorite foam cannon is the sooprinse foam cannon for $20
Im disappointed you were not reviewing a wheel cleaner😂
😂
You got that Kia telluride clean in the cut 😅
I have the MJC one il stick with that
Great 👍video buddy tfs 👍
I tried one from Astro AI. Comes with a 1.0MM orifice, homely pretty shocked for the price!
Try the pwaccs foam cannon it's awesome
Got it from Temu for £2 must say well worth it 😂👍💥
$20 more no , l ordered mine from Temu for $34 Canadian and that mjcc is around $145 on Amazon Canadian big difference
Lol I remember cars with keav reviewed this and I was about to get it until I saw it going for 40 bucks and just bought the MJJC v3 instead if I was spending that kind of money
Bro, what kind of gloves are u wearing..nitrile?
Yes harbor freight 9 mil 👍
Thanks
Im also use bear force, for me its good😊.
Not bad for a back up or for a wheel and tire dedicated cannon.
For sure 💪🧼
I was thinking same. I did grab an MJJC for my intro to foam town.
I think we may have reached peak foam cannon. MTM still a favorite despite its ugly bottle. Griots may be better, but I’m not a fan of the insert to control dilution. I would prefer a dial like the others. I do like the option for a small mouth bottle on the GG so I can use different size water bottles and have multiple for different soaps.
The MJJC may have better foam than the MTM, but only because it uses more product. That clear bottle with it owns thread is a hard no. You have to buy from them when it breaks and a clear hard plastic bottle will break.
Thanks for testing all these so we can be happy with what we already have and save our money by not chasing something better, which it may not be.
You don’t have to use insert (metering tip) on the Griots, it’s an option if you want undiluted soap in bottle so you don’t have to mix it
Rolls Royce use liquid Ivory body wash shampoo . Try it 😊
You had me at the start, who needs instructions….
Bearforce was $26 till the UA-cam rounds. It'll be $70 by next week 🤣It's good for what it is. Stainless is a bit more, but worth it for a backup or Alkaline only since it foams thin.
Dang $26 is definitely epic
My cap broked after few washes …. To thin plastic they use😵
Don’t forget to use code Jamie10 at your mom’s house
😂
Bear force is a pretty good cannon for the price, I think Eddie got a better rendition
Was thinking of getting until I saw the lid part leaking like a spigot. Hard pass
Nice!!!
Bear force is so hit and miss for me , some products are great and some just are built real bad.
Merhaba. Türkiye'de yaşıyorum. bu ürün Türkiye'de satılmıyor. Rica etsem bana 1 adet gönderir misin?
I can’t get behind these cheap Chinese foam cannons. Or even expensive Chinese ones like MJJC lol
Copied design is more accurate, many official products are made in China
Which ones do you have or what country do you support if not products from china😊
@@DAT-TEXAS-DUDE I use the MTM Hydro. Also, there’s a huge difference between companies developing products and having them manufactured in china and chinese companies blatantly ripping off other companies’ products.
It sounds a little... Don't know how to explain it... Weird.
Yeah