@@pedrosanjuan7644 this code is for a power ground issue check that your ground cables are snug. look at the front of the timing cover you should have some grounds. let me know your findings
Same 140,000 miles on my 350z looks like original plugs from 18 years factory burnt clear down and still running just started missing every once in awhile
Watch out for that if it’s on the wrong cylinder for a while it’ll start having affects with your timing. And everyone knows the headaches and how expensive it is to fix the timing on your car.
Thanks Eric great job, man it's pretty compact in there hey! Lol I will certainly do my own now as my mechanic will charge about 375 to 450 AUD to change my plugs.
Update just wanted to get an update man thanks to you I just went ahead since I had it all apart replaced spark plugs injectors it eliminated it it was my spark plugs appreciate it I went ahead and did the injectors cuz I had it down to that section anyway you're the best man!
Thank you for the great detail and showing both sides. I watched 3 other videos all only showed drivers side which is much easier. Thanks for being through.
Getting ready to do this on the weekend. Maybe fuel injectors in a month or so.. Had a weird misfire last week that lasted 5 minutes but no Misfire codes when I put the reader on. Just EVAP system code, so no clue. I need new spark plugs anyways so I figured I'd start here first... I bought the uhhhh spark plugs that are for engines with small mods such as even a cold air intake. So hope it all works out .
Great video as always. Quick question: do spark plugs get damaged from close proximity with a magnet? I'm asking because of what you mentioned in the video
thank you so much! The magnet alone should not damage the spark plug, I didn't use it to install the new ones because it's hard to screw the spark with the magnet and I find it easier to use a hose that can grip the spark plug
@@ERICSDIYGARAGE ok thanks for clearing that up. These two vids were perfect because I was already planning to change my spark plugs and also maybe do the valve cover gaskets as well. Do you know if ignition coil performance degrades with time or is it more a matter of replacing them when they die?
@@audioamateur I'm glad that they will come in handy, from what I've seen people have nothing but issues with they change the coils because they use aftermarket coils that die quickly and eventually go back the the original ones that they were using. I would leave them and if you have misfires or any other issue after replacing the spark plugs than maybe swap them out but if not just leave the original ones
Your channel is so underrated, awesome video and tips I would love to see a safely engine bay cleaning video. U probably have a full exhaust but if u don't, what are ur thoughts on installing a walker to replace de resonator? I'm asking cuz I'm thinking on doing it.
thank you so much! it depends what your going for. now in days you can fine a cheap after full exhaust. if your not into that I dont see a issue with the Walker mid pipe
Nice tutorial. That whole noodle hose on the spark plug kinda baffled me... A wiggle and an extension seem like a better option just becareful as you drop the plug down because with that noodle or an extension you'll still damage the plug with a good enough smack
The issue with sockets is that over time they wear out and the rubber part or metal part that keeps the spark plug from falling ends up failing and they stop working this is going to work all time in my opinion
They're pretty inexpensive too, usually they can wobble a bit as well. Worked perfectly for my 8th gen si, hopefully I can reuse the same one, the plugs are similar if not the same from what I remember.
I put my Infinity G35 coupe on the computer says cylinder Force misfiring code brought up the code PO304 I'm not a mechanic otherwise I wouldn't be watching videos LOL but I have done a lot of work to my car because of videos just a quick question should I start with the spark plugs and the injectors first cuz I know it can get worse than that as far as more money if it's something else might check engine light was flickering off and on and then finally stayed on all in the same day? Any information would be great
Start with your spark plugs if it doesn't go away move the coil park to another cylinder if the code comes up with the cylinder number that you moved the coil pack to than it's a bad coil pack if that doesn't work it could be a bad injector
@@ERICSDIYGARAGE thank you man I appreciate the response quickly you just got yourself a liking a new subscriber awesome video too because it's more up close I can see what you're doing actually compared to a lot of the other videos with the cameras away from it to see what they're doing so I appreciate your video and I'll keep watching them thanks a lot again!
@@ERICSDIYGARAGEhey my G just started bogging down. Major acceleration delay when driving. Rough idle. Smell fuel. Sound like spark plugs or could it be something else?
I recently changed my spark plugs but now I have poor idle , I'm getting code p0300 & p0304 . I'm thinking I mixed the connectors ? I'm not sure please help
hey i have a couple of questions for cylinder 4and 6 do the ignition coil wires cross? i put new coilovers and my car has a bad idle to the point my rmps drop lower then 1,000 before the car almost dies i also have a decent sized crack in the pvc pipe u removed when taking the spark plugs out could that be a problem?
@@ERICSDIYGARAGE do u think it could be any other issue? you think the first thing i should do it get spark plugs? because for some reason i don’t have a check engine light
yooo the cut had my dying when putting the first plug in! Great video, thanks! im gonna tackle this week. I saw you had a pivoting wrench and an extension bar to make things easier along with the magnet and tubing. Were there any other specialty tools that helped? I've heard of spark plug sockets that have rubber in them?
Guys I changed my new spark plugs with the old ones and they are working well but my exhaust sounds like a rotary,I've switched the coils and it still sounds bad. I have minor oil on three of the passenger side valves but it runs good. Tf do I do
If u have the money just go ahead and replace those coils as well sometimes taking them off will brake them then ur stuck with a engine light and miss fire
Yea not just rear wheels drive cars I got 2005 g35X awd sedan and this is the same process but getting that shoring harness out the way on the passenger side it’s Baddd lmao
I still can't believe that my G35 was even running with these spark plugs 😳
Lol yeah the gaps look way too big!
@@audioamateur I always complain that this vehicle felt sluggish I guess this is probably why
@@pedrosanjuan7644 this code is for a power ground issue check that your ground cables are snug. look at the front of the timing cover you should have some grounds. let me know your findings
Same 140,000 miles on my 350z looks like original plugs from 18 years factory burnt clear down and still running just started missing every once in awhile
@@pedrosanjuan7644 Faulty or worn spark plugs *
Faulty spark plug wires or coils *
Distributor failure *
Faulty fuel injector
Vacuum leak
Low fuel pressure
Camshaft sensor defective
Crankshaft sensor defective
Engine timing off
Leaking head gasket
Low engine compression
Poor quality fuel
Dude you just helped me solve my misfire . who ever had this g before me put the wrong wires on the wrong cylinder
I Think i'm having the same issue, can you show me how it supposed to be ?
Just had in go out on me while I was on the highway had me scared my shit done fucked up lol
Watch out for that if it’s on the wrong cylinder for a while it’ll start having affects with your timing. And everyone knows the headaches and how expensive it is to fix the timing on your car.
Dude I swear to god I seen this video and said “Man I think I wired my shut wrong” sure enough 😂
lifesaver, i got work in an hour and i just finished😂 thanks man
“Helps to not damage electrode” **proceeds to slam it on the frame 😂💀
Shit made me laugh so hard
@@steezy.. I don't get why he didn't just use the spark plug socket. There's a magnet on there and it's more rigid...
Great video G
LOL I even like the subtitles even though your English is impeccable so keep up the good work
Thanks Eric great job, man it's pretty compact in there hey! Lol I will certainly do my own now as my mechanic will charge about 375 to 450 AUD to change my plugs.
Sheesh, that much?? I'm in AUS too, and was about to send my v35 off for a service...
@@xxkazu78 true story bro......I nearly fell over when he quoted the job!
Thanks man I did my spark plug today because I was getting a misfire and this help ALOT THANK YOU
glad to help!
Hey, about to do this job on my car. Thanks for the video... How do I torque the spark plugs to sepec? What is that?
Can you do a video on how to do a compression test on these engines?
I'll definitely consider it 🤞
Love the video well put together and gave me the information I need good job man
Update just wanted to get an update man thanks to you I just went ahead since I had it all apart replaced spark plugs injectors it eliminated it it was my spark plugs appreciate it I went ahead and did the injectors cuz I had it down to that section anyway you're the best man!
Thank you for the great detail and showing both sides. I watched 3 other videos all only showed drivers side which is much easier. Thanks for being through.
Getting ready to do this on the weekend. Maybe fuel injectors in a month or so.. Had a weird misfire last week that lasted 5 minutes but no Misfire codes when I put the reader on. Just EVAP system code, so no clue. I need new spark plugs anyways so I figured I'd start here first... I bought the uhhhh spark plugs that are for engines with small mods such as even a cold air intake. So hope it all works out .
Those are some crazy spark plugs. Mine where just as bad when I changed them out 😆. Couldn't believe my car ran with them like that too
Haha I'm glad I'm not the only one
Did it drive better? Lol
Brother, what's the gap ? 0.044? and are ngk 6240 's correct, as well as Hitachi IGC0007 coil pack? Thanks Bro
Thanks for video, very helpful for DYI
Glad to help!
With wat socket I use to torque down the the spark?
Getting mine done today! Thanks man this video is great
thank you!
When torque the spark plugs down to spec, are you using inch pounds? Or foot pounds?
foot pounds
How many foot pounds? Not clear which number to go by in manual.
Great video as always. Quick question: do spark plugs get damaged from close proximity with a magnet? I'm asking because of what you mentioned in the video
thank you so much! The magnet alone should not damage the spark plug, I didn't use it to install the new ones because it's hard to screw the spark with the magnet and I find it easier to use a hose that can grip the spark plug
@@ERICSDIYGARAGE ok thanks for clearing that up. These two vids were perfect because I was already planning to change my spark plugs and also maybe do the valve cover gaskets as well. Do you know if ignition coil performance degrades with time or is it more a matter of replacing them when they die?
@@audioamateur I'm glad that they will come in handy, from what I've seen people have nothing but issues with they change the coils because they use aftermarket coils that die quickly and eventually go back the the original ones that they were using. I would leave them and if you have misfires or any other issue after replacing the spark plugs than maybe swap them out but if not just leave the original ones
Your channel is so underrated, awesome video and tips
I would love to see a safely engine bay cleaning video.
U probably have a full exhaust but if u don't, what are ur thoughts on installing a walker to replace de resonator? I'm asking cuz I'm thinking on doing it.
thank you so much! it depends what your going for. now in days you can fine a cheap after full exhaust. if your not into that I dont see a issue with the Walker mid pipe
This is way easier than replacing the spark plugs on a nissan tiida 🤣🤣🤣
what’s the part number of the spark plugs u using bro? Awesome video I learn a lot
It's there a rubber gasket over the spark plugs?? Or rubber gasket around the spark plugs?? Thanks!!
The gasket for that is built into the valve cover and is not serviceable if leaking
What size is the socket for the spark plugs
Nice tutorial. That whole noodle hose on the spark plug kinda baffled me... A wiggle and an extension seem like a better option just becareful as you drop the plug down because with that noodle or an extension you'll still damage the plug with a good enough smack
The issue with sockets is that over time they wear out and the rubber part or metal part that keeps the spark plug from falling ends up failing and they stop working this is going to work all time in my opinion
also i took the hose that connects to the plenum and runs next to the battery back into the fire wall that let air out could that be causing anything?
Lmao I dead ass be looking for your videos only😂
What’s the recommended spark plug gap I’m doing this today on my g35
@@ERICSDIYGARAGE block me why ?
The other guy that was commenting I blocked him already
Should get you a magnetic socket they come in handy really good
They're pretty inexpensive too, usually they can wobble a bit as well. Worked perfectly for my 8th gen si, hopefully I can reuse the same one, the plugs are similar if not the same from what I remember.
Why no anti seize on NGK?
Doing this now. Thanks for the how to. #props
I put my Infinity G35 coupe on the computer says cylinder Force misfiring code brought up the code PO304 I'm not a mechanic otherwise I wouldn't be watching videos LOL but I have done a lot of work to my car because of videos just a quick question should I start with the spark plugs and the injectors first cuz I know it can get worse than that as far as more money if it's something else might check engine light was flickering off and on and then finally stayed on all in the same day? Any information would be great
Start with your spark plugs if it doesn't go away move the coil park to another cylinder if the code comes up with the cylinder number that you moved the coil pack to than it's a bad coil pack if that doesn't work it could be a bad injector
@@ERICSDIYGARAGE thank you man I appreciate the response quickly you just got yourself a liking a new subscriber awesome video too because it's more up close I can see what you're doing actually compared to a lot of the other videos with the cameras away from it to see what they're doing so I appreciate your video and I'll keep watching them thanks a lot again!
@@ERICSDIYGARAGEhey my G just started bogging down. Major acceleration delay when driving. Rough idle. Smell fuel. Sound like spark plugs or could it be something else?
Bro i have questions i did change my spark plugs but its starts but after its die slowly??help please
I recently changed my spark plugs but now I have poor idle , I'm getting code p0300 & p0304 . I'm thinking I mixed the connectors ? I'm not sure please help
yeah go back and check your connections
U have bad coil packs
Thanx very much very clear :)
If you change the spark plugs do you have to change the ignition coils?
No
hey i have a couple of questions for cylinder 4and 6 do the ignition coil wires cross? i put new coilovers and my car has a bad idle to the point my rmps drop lower then 1,000 before the car almost dies i also have a decent sized crack in the pvc pipe u removed when taking the spark plugs out could that be a problem?
Yes that would make it run rough fix that and you probably did cross the spark plug coil packs
My 03 g35 is just now burning spark plugs at 183k. I'm not the first owner, but I'm certain they've never been changed before.
What socket size you use for the spark plugs?
16mm I believe
my car is sputtering/lagging when i accelerate. seems to me a misfire? but totally fine at idle. could it be spark plugs or coil packs?
Spark plugs
@@ERICSDIYGARAGE thanks bro
@@ERICSDIYGARAGE do u think it could be any other issue? you think the first thing i should do it get spark plugs? because for some reason i don’t have a check engine light
@@tjgotbands start but pulling one spark plug if it looks worn down they probably are all like that
I did this but my engine light came on, everything is connected properly so I don't know what could be the issue.
Coil packs are bad
yooo the cut had my dying when putting the first plug in! Great video, thanks! im gonna tackle this week. I saw you had a pivoting wrench and an extension bar to make things easier along with the magnet and tubing. Were there any other specialty tools that helped? I've heard of spark plug sockets that have rubber in them?
Get a socket with a magnet...
What kind of spark plugs do you recommend for an 03 g35 coupe??
What did you end up using. I have same car.
I used oem spark plugs
Is dialectric grease not needed? I have to do a 05 g 35 spark plugs and coil pack swap out
it's not needed
Guys I changed my new spark plugs with the old ones and they are working well but my exhaust sounds like a rotary,I've switched the coils and it still sounds bad. I have minor oil on three of the passenger side valves but it runs good. Tf do I do
Hey man I drove my car in some deep waters and it shut off, car doesn’t turn on anymore.. any suggestions?
Get the water out of the cylinder it might start
On the left side of the motor is it bad to remove the two hoses?
Add a time stamp so I know what your referring to please
@@ERICSDIYGARAGE you are a goat for replying thsi fast on like a Hera and a half old video🖤🕸
@@ERICSDIYGARAGE 6:36 that curved one that goes to the motor and connects to somewhere in the corner where the battery is
You don't have to remove it you can just let it connected to the plenum and you can work around it just fine
@@ERICSDIYGARAGE and if they do get removed… LMAO
Do you have a link to the air intake hose?
So after do we just start the car
AI says There's only 40,000 g35 Coupes left, in 14 years this car will be worth $2,000,000.oo dollars.
Use a spark plug socket. No extra magnet. The magnet is built into the socket 👌🏾
Yes but with wat do I torque it with?
Could old spark plugs cause detonation?
If u have the money just go ahead and replace those coils as well sometimes taking them off will brake them then ur stuck with a engine light and miss fire
I've never had one break on me when removing plus I don't replace things if they are not necessary the vehicle will let you know when it misfiring
Yea not just rear wheels drive cars I got 2005 g35X awd sedan and this is the same process but getting that shoring harness out the way on the passenger side it’s Baddd lmao
“Prevent the electrode from getting damaged” *smacks spark plug into car* FUCK hahahaha that made me laugh 😂
Well done.
thank you!
Use the hose to prevent it from being damaged: immediately whacks into engine bay
No anti-seize? No dielectric grease ?
it's not needed
5:15 that's a great trick!
what socket to take out spark plugs
16mm I believe
Did you grease the plugs?
no it's not needed on NGK because they have a coating on them that prevents them from getting corroded
I put bosh is that bad?
I'm sure it's okay but that's not what the manufacturer requires NGK spark plugs are superior in my opinion
what tools do you need
10 mm 12mm 16mm extension rachet magnet
@@ERICSDIYGARAGE your the best man just earned yourself a new sub replacing mine as we speak 💯💪🏼
Low-key when I do spark plugs I just use the coil pack to get them out... No extra tools needed 😉
Smart guy 😂
I changed my bosch spark plugs & now the car runs worse smh I checked & made sure everything was in the right spot maybe I need ngk
Any changes??
spark plug socket goes a long way homie
Spark sockets suck which is why I use a hose
Bro appreciate you’re video but that music/fast part where you put everything back is STILL very important
🐐
10 mm 12mm 16mm extension rachet magnet
Pliers
need more detail tbh
This video is intended for viewers who have some mechanical experience. It's not to teach how to work on your vehicle.
bro i changed my spark plugs now my car sounds like a suabru with horrible performance
Check your coil pack connections on cylinder 4 and 6 people always mix them up
🤣🤣
S
Jesus what a complicated ass spark plug replacement lmao
this is some of the worst acting... lol