Hey All, I know this isn't the normal restoration type video but I get asked about this a lot, and I really want to help get as many people into this hobby as I can! I've found it so rewarding. And while it's not easy, I do believe that it's more accessible than people think. It was also a good chance to show how few tools you need to get started - and to show a great place to get them ;) Hopefully it's helpful!
Don't apologize because you're afraid of losing subscribers. This video is very helpful. Because, with the amount of trades being slowly lost into oblivion (like plumbers, electricians etc), we'll need people who know these things. Contrary to MSM ρrοραgαndα, few people have electronic time pieces - at least from what I've seen the past 30 years; electronic watches are actually novelties at this point.
Fantastic video, one question: even as a small bit in your next restoration, could you talk about removing casebacks, cheap tools that could do it, ways to do it and screw up, etc.? I have a Ball watch that's running a bit slow and it's inexpensive enough I kinda want to open it up and tweak the balance adjustment.
In my humble but accurate opinion, this is the best video you've made. So informative and educational. Exactly what someone needs to get bitten by the watch repair bug. Your love and excitement for this hobby is so evident in your voice. Thank you so much for another addictive video.
@@EdwinMoewis I was able to watch it and fix one ST36 I initially bought after watching this I fully disassembled it and put it back. He is a legend! I feel like I understand most watches better now as they all seem the same or similar parts after he broke it down like this.
This is the kind of video ive been waiting for you to put out. The hobby seems daunting when you don't know what is actually necessary, and it takes some experience to know what you absolutely need and whats just nice to have.
My brother is going to celebrate his 60th birthday soon, he wanted to be a watchmaker when he was young. This will be a great gift for his birthday. Thank You.😁
This is a great movement for beginners (like myself) since it doesn't have any tricky complications and it's also a little oversized (it was originally made for pocket watches) so everything is comparatively easy to see.
Just gave this kit a try today. I disassembled it along with the video and reassembled it. I think I had a pivot misplaced because the balance shell was not running. So I disassembled completely again, reassembled and viola!! It runs. What a fun way to spend a few hours this afternoon! Marshall, I really appreciate you making this kit and these videos. I’ve been obsessing over watches for 6 years and following watchmakers on UA-cam for 2. I never would have taken the leap had it not been for your kits online. Thank you
Haha, well I just busted the center wheel’s pinion off trying to pry the canon pinion off with tweezers, as shown. Naturally, the canon pinion went flying, although I miraculously recovered it 😮 with the second wheel’s stub still in place. I guess that’s why we learn on sacrificial movements! Aside from my oafish failure, the video has been super helpful to learn from. I’ve watched this video and many others here. Before actually embarking on doing evil to my Seagull movement, I made step-by-step notes and it all went swimmingly except for the canon pinion removal. Now I know why there are tools for that!
Hey Marshall! Just wanted to say that I finally dove into attempting to repair my own watch, and thankfully I got it successfully working again! I had bought my first watch on eBay, a $50 vintage Seiko that I really liked the look of. Long story short, it ran for a bit, then stopped suddenly. Took it to a local repair shop only for them to "fix" it and it stopped working a few days later. I had shelved the watch for some time and had always thought about repairing it myself, but never had the time and was scared away by the entry cost of the tools needed. I ended up finding a starter set of tools and took the plunge into dissecting the movement, only to find that the issue was a bad escapement wheel! Ordered a genuine replacement, got it installed, and now my watch appears to be up and running again. This whole experience was fueled by watching your videos and sympathizing with your remarks about how if you're mechanically inclined and like working on cars or engines, those skills might also apply with this hobby. I hope to dive deeper into the hobby and expand my skills, and I just wanted to say thank you for these wonderful videos. I love them and watch them every single time you upload. Would love to see another Seiko on the channel sometime soon!
Just purchased a "Skeleton Watch" in an exhibition case. I love knowing what the parts are and their purpose. I had no clue until I started watching this channel.
Just disassembled and reassemble this movement that I bought on Sutcliff Hansen and following this video for the first time. It took about 4 hours from when I sat down and got my ‘work station’ set up to when I finished breaking it down and putting my tools away. I did totally lose the yoke spring and had to get on my hands and knees for a couple other parts lol. It really does just go flying huh… Other than that it went as well as I think it probably could have. Thank you for creating this tutorial and making this whole process accessible. I had a great time and I’m gunna do it again soon.
Back to basics! Mark Lovick and you were instrumental in boosting my confidence enough to give the hobby a shot. 2.5 years later, still loving it. Thanks!
For sure. I also took the Mark Lovick course and it goes to great detail as it should. Marshall's video is concise and a great intro to what it takes. You don't need $100K of Swiss tools. That will come later :)
When I’m done battling cancer and get back on my feet I will pick up tools or buy one of these kits. I think this will be good for me to try. I have a couple old watches that need repairs that I would love to get working 🍻
No local watchmaker is willing to repair my lever set pocket watch, so i am collecting the tools to replace the balance staff. Thanks to your videos i feel confident enough to try myself. Thanks for making detailed & easy to follow repairs, regards Gary
Marshall, watching your videos is what got me into this amazing and sometimes infuriating hobby. I began watching your videos on one of my monitors at work when i would do my employees payroll and found your videos oddly rewarding. Watching your video where you did your 1st rolex gave me the courage to try this and i have now completely restored 2 pocket watches and around a dozen wrist watches. You included your mistakes in this video as well as when you broke a wheel in your personal Rolex and that is great. So many watchmakers eliminate their mistakes to make it seem like they never make mistakes and i think it intimidates people from getting into this hobby. Thank you for all you do to educate the masses.
I just took apart and put together my first 2 pocket watches today. One of them had a bridge with 5 pivots 😅 including the pallet fork, it took me like an hour and a half to get everything lined up. I was so happy when it finally clicked down into place
Marshall, Thanks again for sharing your passion and tutelage with us! I started watching your channel on a whim about 4-5 months ago and definitely got bitten by the watch bug from them. Please keep up the great videos! Also you have helped me with making informed decisions on purchasing vintage timepieces and have saved me from making poor decisions. Thanks for that as well!
I retired early and have been replacing the heads on the truck.Most of the major car work is done and looking for another fun hobby. I also repair small electronics, so I dipped my foot into basic watch repair to do something different by replacing batteries and fix bands. I have a basic watch repair tool kit to replace a battery and fix bands. That was fun so I am working on getting all the tools needed to do repair and ordered the same movement. Thanks for the great video and all the others that inspired me to move forward. My step dad's pocket watch was given to me not working when he passed and I would like to repair it after I have some watch repairs under my belt.
I ordered all the parts and a few more tools and followed your tutorial. First time I've ever taken apart a movement, was extremely fiddly in some parts but fun for most, I dont know why but once I got the balance wheel in place and it started moving, "OHHH!" came out of nowhere and made me jump😂 Your videos are incredible. Being able to basically take a movement apart with you was brilliant, I hope you do more videos like these in the future!❤
As someone who took up the hobby of watchmaking a few months ago, this video comes a few months too late. But I’m glad you make this video because it’s a really good resource for people who are curious about hobby. Your videos and website are great because they make a watchmaking hobby approachable. You aren’t a Rolex trained technician but you’ve done more for the interest in watchmaking and watch modding than any of them could.
Great video! I was able to get my grandfathers pocket watch running again from watching your content. This video clarifies a few things to me. Appreciate it!
This video was quite timely as I just recently purchased an ST36 with intention of diving deeper into this hobby. With your video as a guide I took the movement completely apart 2 days ago and this evening put it back together, successfully I might add! The most difficult task was putting the second hand back on. Next step is to do it again without your guidance. I got into putting together watches as a hobby after retiring just over 4 years ago. I could purchase parts online and assemble a watch. Through this process my interest in the inner works of a mechanical and automatic movements started to grow. I have learned a great deal from watching your videos over the last couple of years. So thank you for sharing your skills and knowledge of mechanical watches. They have inspired me and have been the catalyst that have spurred me on. Thanks again.
tks for these vids. I dont do this hobby myself, but your vids are relaxing to watch. I have seen some vids where you have some rust stained plates or other heavier parts that need cleaning. you might consider a dremel with 3m polishing wheels used for jewelry. these come in various harnesses like grits for sandpaper but polish well without removing surface material. it softly polish and get rid of your surface rust stains.
Thank you so much for this video! I was able to follow along, it wasn't as hard as I thought it would be. You're right seeing the balance wheel go gives such a nice feeling
Thank you so much Marhall! While I have watched (no pun intended) a lot of watch videos on UA-cam, you are truly the OG who got me down this rabbit hole. I am a life-long gear-head, and your videos have been truly inspirational!
I've only yesterday told a reddit user to look at your channel for advice on putting the bridge back on. Your bridge work was perfect, but you ignored your previous advice on checking that everything was spinning freely before screwing it down. I think thanks mainly to your channel, I'm more of an assemble/repair watch person than a collector :)
long time, first time. I remember you did a tool review a few years ago - so happy you came out with this video as I was just thinking of really getting into this hobby rather than just watching
I purchased this movement a week ago to do exactly the same thing 😂 you've made my day I can now strip my movement down while watching your video... Perfect time thanks for the video..
I also started watchmaking based on your videos and this particular one will help many new hobbiest in the beginning. Only thing I would have wanted to be included is the cleaning of the parts without a cleaning machine. Like a basic ultrasonic and the right cleaning solutions for the job.
You know, I actually understood most of what you were talking about, a very far cry from the 1st time I watched one of your videos, there may be hope for me yet, thanks for the inspiration.
Been waiting for this video since I found your channel about a month ago. Watch the videos on the tools, and a bunch of restorations. This is what I’ve wanted!!
I’ve been watching your videos and fascinated by your skill for over a year. I’ve been telling my wife, I want to give that a try so I’m going to get one of your kits and give it a go. I figured I’ve got your video if I got in the weeds. As I get closer to retirement I’ve really been looking for something to pour myself into.
Wow, the machine work on that Seagull is way better than I would have thought given the price. It might be fun to make a pocket watch out of one. Thanks for another interesting video sir.
got my 39mm with the white dial on the 3-link "Bader" bracelet watch on MAMACOO 3 weeks ago and am loving it to pieces. Absolute fantastic watch that wears super comfortable on my 6.75 inch wrist. Chose the 3-link over the 5-link bracelet for the toolless quick adjustment. Way more comfortable than my Longines Hydroconquest 41 mm.
This is amazing! Been wanting to purchase the starting pack for a while and now I can comfortably do so knowing I can watch this video if I need any help so thank you so much for making this video 😍
This appears to be the best video on this subject, and I'm looking forward to working on this movement. I especially like the fact that you have described each piece.
Please keep doing these , i live in algeria and i cannot afford mark lovick's courses fr😪 like one course of his costs almost a salary in my country .. and i love this hobby so much .. cheers and much much love to your channel aswell , i watched all your videos without skipping a second
Marshal, thank you so much for posting this. I’ve been in the fence about getting started on this hobby, as I just recently got my first automatic watch a little over a year ago(man it’s a hell of a rabbit hole lol). This video was literally what I needed to order the same kit you used in this video to start my side quest into the more horological side of watches!
My wife just bought this kit for me a couple of weeks ago, so this video is perfect timing! I had already disassembled it (I even took out the main spring from the barrel!), so I'm really glad I'll have this video to refer to now. Thanks Marshal!
i purchased the starter kit and really excited to give this a go. great video-you make this look so easy but i'm sure i'm going to find out that it isn't!
Excellent tutorial Marshall. This one was VERY much appreciated. I appreciate the focus on some of the more subtle aspect that aren't obvious in the other videos. Nicely done!
Thanks for this. I got my kit from you today and already completely disassembled and reassembled the movement you provided. Now I'm going to do it a few more times and go through the cleaning and lubrication steps before tackling the 1912 Hamilton 992 I got at an estate sale for $40. (I already know the mainspring is broken, but doesn't look like any busted jewels or anything).
Absolutely beautiful your a legend that was fantastic I've never been that interested in watches until I was flicking around on UA-cam and come across your video I've never worn a watch in my whole life but now I've got some watches coming nothing fancy but I have to start somewhere and it's swiss made can't wait Great channel All the best
Excellent video, as always! You have an excellent way of explaining things and I thank you for your commitment! I would like to see a follow on video to this that encompasses building this movement into a working watch. To include cleaning and oiling. Then a follow on series for an automatic watch. Thank you!
Perfect timing. I just received the complete kit from you. Great tutorial for my first time taking apart and reassembling the movement. All good except I must have made a mistake with the keyless works. Watch won’t wind. Now I have an excuse to take it apart and do it all over again. Of course I also had to search for an hour under my bench when I dropped the click screw! Finally found it. Great channel.
Just a few weeks ago I took a clinic where we disassembled and reassembled this exact movement. I'll keep this video bookmarked, might be useful to have going forward.
You are a brilliant fellow and a wonderful teacher. But allow me to put on my Cassandra hat for a moment and voice my fear that this fascinating video may ultimately prove responsible for the injury to, and death of, dozens of watches. I am a flutist; and, as you know, the modern flute was invented by Theobald Boehm, whose skills included watchmaking-and when my flute requires adjustment, it goes straight to a professional flute-maker. I never, EVER attempt to disassemble my flute. There are plenty of woodwind repairmen who are butchers and charlatans. A watch is a delicate instrument: even the wearing of a fine wrist watch is a skill with a learning curve. I say these things in all humility, and with the greatest respect for the work you are doing.
AWESOME video Marshall. Thank you so much for this one. I really want to get ahold of that movement and convince the wife to let me get some basic tools.
I started watching your channel about a month ago, I saw the video where you restored a kids grandpas GMT master from like the 60s. Really interesting, and the way you talk about it is super easy to follow what you’re doing and why. Just wanted to say thank you for being awesome
Nice to watch, Marshall ! I smiled when i saw the movement you are taking apart, it looks totally similar to the one in my cheap mechanical chinese watch I bought some weeks ago 😬 .
Great video, very inspiring. I was a motorcycle technician for 20 years, however back problems stopped me there. Watches are a hobby passion now and I am just getting into watch making. Keep up the great work Marshall.
Just found this channel and started getting into watchmaking. This is exactly the video I wanted and needed 🙏 Been managing with the couple screwdrivers I had laying around. Gonna go buy a kit on the website right now. Thanks Marshall!
❤ this video!! I know you don't usually do clocks, but I have an overwound Grandfather Clock & it's not like one can just cart it off to the repair shop. If I could release it, maybe I could get it started again. But I haven't a clue how to do that YET. 😂 🤣 😂
Thanks for everything Marshall! You've inspired me to get into this hobby and will even be documenting my journey on UA-cam. For now I'm practising on a cheap Chinese movement before graduating on to real watches. Can't wait to embark on this journey!
Great idea to demo the kit. It would have made it longer, but discussing common things you check, and common issues you find during the process. This was not a topic or consideration as a hobby until I ran across your videos. I have no doubt that I will dipping my toes at some point.
Would love to see a similar video showing showing an off the shelf movement being cleaned and oiled with corresponding time grapher results! Keep up the great content!
What a great video, for a fantastic looking starter kit - will definitely bookmark that box for a future gift idea. Would love to see more of these "tutorial style" videos, such as oiling/lubing all the relevant bits inside.
Another great video I bought 1 of these movements a couple of months ago after watching some of your videos & getting hooked In the process of getting all the parts to put the movement in to a watch now 😎🤘🏻
Thanks for the show and tell. It will be a great help when I work on my ST36 movement later. Figured I’ll do it several times, until I have it figured out.
Hey All, I know this isn't the normal restoration type video but I get asked about this a lot, and I really want to help get as many people into this hobby as I can! I've found it so rewarding. And while it's not easy, I do believe that it's more accessible than people think. It was also a good chance to show how few tools you need to get started - and to show a great place to get them ;) Hopefully it's helpful!
Don't apologize because you're afraid of losing subscribers. This video is very helpful. Because, with the amount of trades being slowly lost into oblivion (like plumbers, electricians etc), we'll need people who know these things. Contrary to MSM ρrοραgαndα, few people have electronic time pieces - at least from what I've seen the past 30 years; electronic watches are actually novelties at this point.
Also, you should pin your comment. :)
this is a long awaited and much needed episode! Thank you very much, for it👍 greetings from Poland🇵🇱
On your video advice I got one of these for my videos as well. Great call.
Fantastic video, one question: even as a small bit in your next restoration, could you talk about removing casebacks, cheap tools that could do it, ways to do it and screw up, etc.? I have a Ball watch that's running a bit slow and it's inexpensive enough I kinda want to open it up and tweak the balance adjustment.
In my humble but accurate opinion, this is the best video you've made. So informative and educational. Exactly what someone needs to get bitten by the watch repair bug. Your love and excitement for this hobby is so evident in your voice. Thank you so much for another addictive video.
Marshall was a big reason for me getting into the hobby too
hear hear!
That is so true, I have the ST36 still collecting dust in my drawer but with this video, I will make time now. For sure!
Agreed
@@EdwinMoewis I was able to watch it and fix one ST36 I initially bought after watching this I fully disassembled it and put it back. He is a legend! I feel like I understand most watches better now as they all seem the same or similar parts after he broke it down like this.
I love how your channel and store lowers the barrier to entry for people who want to try something new but don't know where to start. Excellent work!
So true. Love this guy
This is the kind of video ive been waiting for you to put out. The hobby seems daunting when you don't know what is actually necessary, and it takes some experience to know what you absolutely need and whats just nice to have.
This is great. So many of the videos like this get side tracked. It was great to watch a straightforward start to finish video like this.
My brother is going to celebrate his 60th birthday soon, he wanted to be a watchmaker when he was young. This will be a great gift for his birthday. Thank You.😁
I’m sure he will love it. What a thoughtful gift!
This is a great movement for beginners (like myself) since it doesn't have any tricky complications and it's also a little oversized (it was originally made for pocket watches) so everything is comparatively easy to see.
Just gave this kit a try today. I disassembled it along with the video and reassembled it. I think I had a pivot misplaced because the balance shell was not running. So I disassembled completely again, reassembled and viola!! It runs. What a fun way to spend a few hours this afternoon! Marshall, I really appreciate you making this kit and these videos. I’ve been obsessing over watches for 6 years and following watchmakers on UA-cam for 2. I never would have taken the leap had it not been for your kits online. Thank you
Haha, well I just busted the center wheel’s pinion off trying to pry the canon pinion off with tweezers, as shown. Naturally, the canon pinion went flying, although I miraculously recovered it 😮 with the second wheel’s stub still in place. I guess that’s why we learn on sacrificial movements!
Aside from my oafish failure, the video has been super helpful to learn from. I’ve watched this video and many others here. Before actually embarking on doing evil to my Seagull movement, I made step-by-step notes and it all went swimmingly except for the canon pinion removal. Now I know why there are tools for that!
Hey Marshall! Just wanted to say that I finally dove into attempting to repair my own watch, and thankfully I got it successfully working again! I had bought my first watch on eBay, a $50 vintage Seiko that I really liked the look of. Long story short, it ran for a bit, then stopped suddenly. Took it to a local repair shop only for them to "fix" it and it stopped working a few days later. I had shelved the watch for some time and had always thought about repairing it myself, but never had the time and was scared away by the entry cost of the tools needed. I ended up finding a starter set of tools and took the plunge into dissecting the movement, only to find that the issue was a bad escapement wheel! Ordered a genuine replacement, got it installed, and now my watch appears to be up and running again. This whole experience was fueled by watching your videos and sympathizing with your remarks about how if you're mechanically inclined and like working on cars or engines, those skills might also apply with this hobby. I hope to dive deeper into the hobby and expand my skills, and I just wanted to say thank you for these wonderful videos. I love them and watch them every single time you upload. Would love to see another Seiko on the channel sometime soon!
Just purchased a "Skeleton Watch" in an exhibition case. I love knowing what the parts are and their purpose. I had no clue until I started watching this channel.
Welcome to the addiction, get a Seiko 5!
Thank youuuuuu. I want to get into this hobby and starting off with the basics and knowing how far they stretch, is very relevant.
Just disassembled and reassemble this movement that I bought on Sutcliff Hansen and following this video for the first time. It took about 4 hours from when I sat down and got my ‘work station’ set up to when I finished breaking it down and putting my tools away. I did totally lose the yoke spring and had to get on my hands and knees for a couple other parts lol. It really does just go flying huh… Other than that it went as well as I think it probably could have. Thank you for creating this tutorial and making this whole process accessible. I had a great time and I’m gunna do it again soon.
Update, did it again today and it went substantially faster. Under an hour this time!
Back to basics! Mark Lovick and you were instrumental in boosting my confidence enough to give the hobby a shot. 2.5 years later, still loving it. Thanks!
For sure. I also took the Mark Lovick course and it goes to great detail as it should. Marshall's video is concise and a great intro to what it takes. You don't need $100K of Swiss tools. That will come later :)
When I’m done battling cancer and get back on my feet I will pick up tools or buy one of these kits. I think this will be good for me to try. I have a couple old watches that need repairs that I would love to get working 🍻
This is incredible! I bought this movement and a set of beginner tools a while back but was too intimidated to get started. Thank you for this!
Hell yea, new vid just dropped! I just bought my first watch tool and it was a blast using it. Cant wait to continue to slowly build my collection.
No local watchmaker is willing to repair my lever set pocket watch, so i am collecting the tools to replace the balance staff. Thanks to your videos i feel confident enough to try myself. Thanks for making detailed & easy to follow repairs, regards Gary
Marshall, watching your videos is what got me into this amazing and sometimes infuriating hobby. I began watching your videos on one of my monitors at work when i would do my employees payroll and found your videos oddly rewarding. Watching your video where you did your 1st rolex gave me the courage to try this and i have now completely restored 2 pocket watches and around a dozen wrist watches. You included your mistakes in this video as well as when you broke a wheel in your personal Rolex and that is great. So many watchmakers eliminate their mistakes to make it seem like they never make mistakes and i think it intimidates people from getting into this hobby. Thank you for all you do to educate the masses.
Dude I am hooked I cant wait until i get me a training kit to do this... Nice work, Thank YOU!
Thanks! More like this!!
This is just what a watch tinkerer like me needed ,very informative .
Thanks Marshall for taking the time
I just took apart and put together my first 2 pocket watches today. One of them had a bridge with 5 pivots 😅 including the pallet fork, it took me like an hour and a half to get everything lined up. I was so happy when it finally clicked down into place
By far one of the best educational watch movement disassemble and reassemble videos.
Thank you for your time and sharing your knowledge
Marshall, Thanks again for sharing your passion and tutelage with us! I started watching your channel on a whim about 4-5 months ago and definitely got bitten by the watch bug from them. Please keep up the great videos! Also you have helped me with making informed decisions on purchasing vintage timepieces and have saved me from making poor decisions. Thanks for that as well!
Love this! Just ordered the starter kit and diving in next week!
I cannot even begin to tell you how grateful I am that you correctly call the screws reverse threaded and not left handed.
I retired early and have been replacing the heads on the truck.Most of the major car work is done and looking for another fun hobby. I also repair small electronics, so I dipped my foot into basic watch repair to do something different by replacing batteries and fix bands. I have a basic watch repair tool kit to replace a battery and fix bands. That was fun so I am working on getting all the tools needed to do repair and ordered the same movement. Thanks for the great video and all the others that inspired me to move forward. My step dad's pocket watch was given to me not working when he passed and I would like to repair it after I have some watch repairs under my belt.
I ordered all the parts and a few more tools and followed your tutorial. First time I've ever taken apart a movement, was extremely fiddly in some parts but fun for most, I dont know why but once I got the balance wheel in place and it started moving, "OHHH!" came out of nowhere and made me jump😂 Your videos are incredible. Being able to basically take a movement apart with you was brilliant, I hope you do more videos like these in the future!❤
As someone who took up the hobby of watchmaking a few months ago, this video comes a few months too late. But I’m glad you make this video because it’s a really good resource for people who are curious about hobby.
Your videos and website are great because they make a watchmaking hobby approachable. You aren’t a Rolex trained technician but you’ve done more for the interest in watchmaking and watch modding than any of them could.
Great video! I was able to get my grandfathers pocket watch running again from watching your content. This video clarifies a few things to me. Appreciate it!
That's the exact movement I started on, and completely broke the pallet fork, so I am VERY glad that this was what I practiced on. What a fun video!
Great starter kit. Nice movement. This was a great disassembly/reassembly video.
I predict this will b eyour most popular video - thank you for doing it, you have helped me tremedously
This video was quite timely as I just recently purchased an ST36 with intention of diving deeper into this hobby. With your video as a guide I took the movement completely apart 2 days ago and this evening put it back together, successfully I might add! The most difficult task was putting the second hand back on. Next step is to do it again without your guidance. I got into putting together watches as a hobby after retiring just over 4 years ago. I could purchase parts online and assemble a watch. Through this process my interest in the inner works of a mechanical and automatic movements started to grow. I have learned a great deal from watching your videos over the last couple of years. So thank you for sharing your skills and knowledge of mechanical watches. They have inspired me and have been the catalyst that have spurred me on. Thanks again.
Fantastic video for someone like me who wants to start watch repair and service 👍
Great video! Thank you. Takes me back to watching watch repair channel and taking the courses online. You’re a very good teacher
tks for these vids. I dont do this hobby myself, but your vids are relaxing to watch. I have seen some vids where you have some rust stained plates or other heavier parts that need cleaning. you might consider a dremel with 3m polishing wheels used for jewelry. these come in various harnesses like grits for sandpaper but polish well without removing surface material. it softly polish and get rid of your surface rust stains.
You did an amazing job with just basic tools, very clear and sooner or later I'll dive into it!
Thank you so much for this video! I was able to follow along, it wasn't as hard as I thought it would be. You're right seeing the balance wheel go gives such a nice feeling
Great video Marshall - this will encourage a lot of people to give it a go !!👍
This is pure gold. Thanks very much!
Thank you so much Marhall! While I have watched (no pun intended) a lot of watch videos on UA-cam, you are truly the OG who got me down this rabbit hole. I am a life-long gear-head, and your videos have been truly inspirational!
I've only yesterday told a reddit user to look at your channel for advice on putting the bridge back on. Your bridge work was perfect, but you ignored your previous advice on checking that everything was spinning freely before screwing it down.
I think thanks mainly to your channel, I'm more of an assemble/repair watch person than a collector :)
A always Marshall, full of helpful guidelines and techniques to make the challenging mechanics of horology more understable and do-able. Many thanks!
Best video you have ever made. Really hoping for a lubrication tutorial on this movement next
Much awaited video, love from middle east
long time, first time. I remember you did a tool review a few years ago - so happy you came out with this video as I was just thinking of really getting into this hobby rather than just watching
I purchased this movement a week ago to do exactly the same thing 😂 you've made my day I can now strip my movement down while watching your video... Perfect time thanks for the video..
Great video Marshal!
I also started watchmaking based on your videos and this particular one will help many new hobbiest in the beginning. Only thing I would have wanted to be included is the cleaning of the parts without a cleaning machine. Like a basic ultrasonic and the right cleaning solutions for the job.
You know, I actually understood most of what you were talking about, a very far cry from the 1st time I watched one of your videos, there may be hope for me yet, thanks for the inspiration.
This is such a beneficial video! After watching your videos and uncut Patreon videos, this summarizes so many things for me. Thanks very much!
Been waiting for this video since I found your channel about a month ago. Watch the videos on the tools, and a bunch of restorations. This is what I’ve wanted!!
I’ve been watching your videos and fascinated by your skill for over a year. I’ve been telling my wife, I want to give that a try so I’m going to get one of your kits and give it a go. I figured I’ve got your video if I got in the weeds. As I get closer to retirement I’ve really been looking for something to pour myself into.
Wow, the machine work on that Seagull is way better than I would have thought given the price. It might be fun to make a pocket watch out of one. Thanks for another interesting video sir.
got my 39mm with the white dial on the 3-link "Bader" bracelet watch on MAMACOO 3 weeks ago and am loving it to pieces. Absolute fantastic watch that wears super comfortable on my 6.75 inch wrist. Chose the 3-link over the 5-link bracelet for the toolless quick adjustment. Way more comfortable than my Longines Hydroconquest 41 mm.
So glad you made this video! I bought this movement after watching your videos and couldn’t find any good videos to walk me through it.
This video is gonna be great for kids getting into the hobby with the ST36 👏
This is amazing! Been wanting to purchase the starting pack for a while and now I can comfortably do so knowing I can watch this video if I need any help so thank you so much for making this video 😍
Got all the tools needed, 5 watches to play with... I'll get on it one of these days, good video Marshal.
This appears to be the best video on this subject, and I'm looking forward to working on this movement. I especially like the fact that you have described each piece.
Please keep doing these , i live in algeria and i cannot afford mark lovick's courses fr😪 like one course of his costs almost a salary in my country .. and i love this hobby so much .. cheers and much much love to your channel aswell , i watched all your videos without skipping a second
Can you do an NH35? I think a ton of people have them in entry level watches now and would love to see that!!
Marshal, thank you so much for posting this. I’ve been in the fence about getting started on this hobby, as I just recently got my first automatic watch a little over a year ago(man it’s a hell of a rabbit hole lol). This video was literally what I needed to order the same kit you used in this video to start my side quest into the more horological side of watches!
This video is perfect. I've been meaning to practice on an ST36 with cheap tools, all sourced from a certain large chinese retailer. Thank you!
My wife just bought this kit for me a couple of weeks ago, so this video is perfect timing! I had already disassembled it (I even took out the main spring from the barrel!), so I'm really glad I'll have this video to refer to now. Thanks Marshal!
i purchased the starter kit and really excited to give this a go. great video-you make this look so easy but i'm sure i'm going to find out that it isn't!
Excellent tutorial Marshall. This one was VERY much appreciated. I appreciate the focus on some of the more subtle aspect that aren't obvious in the other videos. Nicely done!
Okay, you’ve convinced me. I’m getting one of these kits.
Really good to see the basics with basic tools. Thank you
Just downloaded this video and also ordered a watch repairing kit. This video will work as a textbook. Thanks a lot!
Thanks for this. I got my kit from you today and already completely disassembled and reassembled the movement you provided. Now I'm going to do it a few more times and go through the cleaning and lubrication steps before tackling the 1912 Hamilton 992 I got at an estate sale for $40. (I already know the mainspring is broken, but doesn't look like any busted jewels or anything).
Absolutely beautiful your a legend that was fantastic I've never been that interested in watches until I was flicking around on UA-cam and come across your video I've never worn a watch in my whole life but now I've got some watches coming nothing fancy but I have to start somewhere and it's swiss made can't wait Great channel All the best
Hi Marshall, I just ordered my first automatic,a Bulova Surveyor 96b427 my interest spiked watching your channel ,thankyou😊
Excellent video, as always! You have an excellent way of explaining things and I thank you for your commitment! I would like to see a follow on video to this that encompasses building this movement into a working watch. To include cleaning and oiling. Then a follow on series for an automatic watch. Thank you!
Perfect timing. I just received the complete kit from you. Great tutorial for my first time taking apart and reassembling the movement. All good except I must have made a mistake with the keyless works. Watch won’t wind. Now I have an excuse to take it apart and do it all over again. Of course I also had to search for an hour under my bench when I dropped the click screw! Finally found it. Great channel.
THIS IS WHAT WE’VE BEEN WAITING FOR!
Good timing. Got your full kit, timegrapher, and ultrasonic cleaner and it arrives today so I can follow along.
Hooked! I just took apart my first Seagull ST36. It's work but so rewarding!
Just a few weeks ago I took a clinic where we disassembled and reassembled this exact movement. I'll keep this video bookmarked, might be useful to have going forward.
I believe no man can say no to AMZWATCH's watches
You are a brilliant fellow and a wonderful teacher. But allow me to put on my Cassandra hat for a moment and voice my fear that this fascinating video may ultimately prove responsible for the injury to, and death of, dozens of watches. I am a flutist; and, as you know, the modern flute was invented by Theobald Boehm, whose skills included watchmaking-and when my flute requires adjustment, it goes straight to a professional flute-maker. I never, EVER attempt to disassemble my flute. There are plenty of woodwind repairmen who are butchers and charlatans. A watch is a delicate instrument: even the wearing of a fine wrist watch is a skill with a learning curve. I say these things in all humility, and with the greatest respect for the work you are doing.
So people can't learn because they will break them? Idk who's attempting to fix a Rolex on the first try
AWESOME video Marshall. Thank you so much for this one. I really want to get ahold of that movement and convince the wife to let me get some basic tools.
Really useful and inspiring video. Hope it gets lots of people started.
I started watching your channel about a month ago, I saw the video where you restored a kids grandpas GMT master from like the 60s. Really interesting, and the way you talk about it is super easy to follow what you’re doing and why. Just wanted to say thank you for being awesome
Nice to watch, Marshall ! I smiled when i saw the movement you are taking apart, it looks totally similar to the one in my cheap mechanical chinese watch I bought some weeks ago 😬 .
This is the video I've been waiting for. Now I can buy one of your practice packs. Count me in. Thanks!
Great video, very inspiring. I was a motorcycle technician for 20 years, however back problems stopped me there. Watches are a hobby passion now and I am just getting into watch making. Keep up the great work Marshall.
Just found this channel and started getting into watchmaking. This is exactly the video I wanted and needed 🙏 Been managing with the couple screwdrivers I had laying around. Gonna go buy a kit on the website right now. Thanks Marshall!
❤ this video!! I know you don't usually do clocks, but I have an overwound Grandfather Clock & it's not like one can just cart it off to the repair shop. If I could release it, maybe I could get it started again. But I haven't a clue how to do that YET. 😂 🤣 😂
Thanks for everything Marshall! You've inspired me to get into this hobby and will even be documenting my journey on UA-cam. For now I'm practising on a cheap Chinese movement before graduating on to real watches. Can't wait to embark on this journey!
Great idea to demo the kit. It would have made it longer, but discussing common things you check, and common issues you find during the process. This was not a topic or consideration as a hobby until I ran across your videos. I have no doubt that I will dipping my toes at some point.
Would love to see a similar video showing showing an off the shelf movement being cleaned and oiled with corresponding time grapher results! Keep up the great content!
What a great video, for a fantastic looking starter kit - will definitely bookmark that box for a future gift idea.
Would love to see more of these "tutorial style" videos, such as oiling/lubing all the relevant bits inside.
Love this I was just scrolling through your page for exactly this as I just bought all my tools 👏👏👏👏
I’m just about to do my first service and this has come just in time
Another great video I bought 1 of these movements a couple of months ago after watching some of your videos & getting hooked
In the process of getting all the parts to put the movement in to a watch now 😎🤘🏻
Thanks for the show and tell. It will be a great help when I work on my ST36 movement later. Figured I’ll do it several times, until I have it figured out.
I literally just bought an st36 and it came in yesterday. How are you reading my mind Marshall... HOW!?!?
Love it.... Thankyou for this video... Love your humble and nice way in all your videos.. superb work. 👍🏻