How to Maintain Lexus IS250 IS350 Rear Brakes | Remove Pads | Seized Caliper Slide Pin
Вставка
- Опубліковано 2 жов 2024
- We go over the maintenance of the rear caliper on the 2006-2013 Lexus IS250 and IS350. This includes how to remove and install of the brake pads.
This also applies to the 2006-2011 GS300, GS350, and GS470. The slide bolt seizing is a common issue.
RAYBESTOS H16198 :amzn.to/3SCx7eX
CARLSON 16198: amzn.to/48PtoQF
Sil Glyde Silicone: amzn.to/3ubC6cY
----------
Support the Patreon: / tunerwithkids
Merch Available: teespring.com/...
Follow Me on IG: / tuner_with_kids
For questions and inquiries: tunerwithkids@gmail.com
-------------------------
#brakes #lexusIS250 #lexus
Disclaimer: "Tuner with Kids", the alias for the human content creator for this UA-cam channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used. - Авто та транспорт
Wrong grease will ruin rubber boots real fast, use the correct grease guys
Did my car few weeks ago. Never done it in 16 years, thanks god it not seize up to bad
Your videos are amazing! I appreciate the hell outa you!
Hey man, thanks a lot for the video. What brand rotors are on the rear of your IS?
OEM.
I thought IS250 doesn't have vented disc for rears.
I wish these were designed differently, iv gone through too many rear calipers. Between seized guide pins to pistons themselves. Might need to regrease these each winter
I think they knew it was a bad design which is why they changed it on the 3IS and 4GS.
What exactly do you mean by “periodically?”… every 3 months, 6 months?…
At least annually or change oil. Check the boot and slide.
Promo-SM ❣️
Maybe this is why my car keeps pulling to the right when I brake bcuz maybe the guide pins are seized?
Maybe check both and front calipers, to see if piston is moving too.
@@TunerwithKids I have a 2010 is350 and I just checked. The fronts don’t have guide pins but the front is250 does. My rears have guide pins and they’re perfectly fine. I checked everything including the brakes and its all fine. Do you know what else could be the problem? Maybe the brake hose?!
When i click on the link is showing me that not fit in is 250. Another stuff. Will the is350c rear caliper fit on is250 ?
The is250/350 use same pads. The boots should be same. Caliper is different due to the bigger vented rotors for 350.
@@TunerwithKids so calipers is350c will not fit in my is250
@TheManueltavarez need 350 rotors and bend the back plate.