Baofeng Basics-5 settings you probably want to change
Вставка
- Опубліковано 24 лип 2024
- Baofeng Basics- 5 menu setting you probably want to change. How to get rid of the voice and beeps. And how to listen to 2 channels at one time.
Baofeng BF-F8+ amzn.to/3sPH4Wr
Nagoya 771 amzn.to/3qgDVgL
Shorty antenna 2 pack amzn.to/3sOfNno
ABBREE 18” folding antenna amzn.to/3qqU9UR
ABBREE 28” folding antenna amzn.to/3uQIxOl
Roll up antenna ebay.us/ysJQSN
Baofeng small battery 2 pack amzn.to/3rjCcst
Baofeng large battery 2 pack amzn.to/3reDIvQ
USB charge cable for the charger base amzn.to/3uSXSO9
USB charger for the large battery amzn.to/3uYkxZm
AA Battery Case amzn.to/2PCTK4P
Speaker/Mike amzn.to/3kNBcKH
Handheld CB amzn.to/3e79cQZ
TYT 9800 amzn.to/3uYll0k
Base antenna GP-6 amzn.to/3c4MUMW
60 watt folding solar panel amzn.to/30bkVG1
Solar charge controller for LifePo4 batteries amzn.to/3egBMiZ
As an Amazon Associate I earn a small amount from qualifying purchases, this helps to support this channel and its content.
#getyourcommsup - Навчання та стиль
It’s good to see someone who actually cares about promoting the hobby rather than being an elitist jackass to the new guys. It’s about fun and longevity.
Scotland the Brave at the end!! Thanks for the video. Much Love from Scotland, ❤ 😊 XXX ...
Thank you for doing this video. I've had a Baofeng for some time and you just taught me something I didn't know. Thanks again.
We need mooooooore. You do a great job, keep coming w the vids.
I set mine up the exact same way. Perfect video. Please keep doing more.
instablaster.
Thanks, that video solved two problems and taught me a lot more.
Best tutorial I’ve seen so far on this radio. Thank you
Thanks! I’m working on more videos!
Excellent tutorial! I'm a new subscriber and will be watching your other vids to learn my radio.
Thanks! I changed 3 of 5 on mine from the info you presented.
Hi Baofang Bob, KC7GTQ , thanks for the vid , I"m a greehorn here, so far I"ve found the on off switch, I promise to keep off the ham bands until i"m Kosher gotta start somewhere. Anyhoo thanks for the shpeel. thumbs up..(it was the bagpipes at the end that got me.)
Nice video! Keep it up, great explanation
Great job explaining!
Very helpful indeed, thank you.
Thank you for showing this just got my radios today been scanning youtube for for how to videos I am reading the book that came with it but I like to see videos too.
Glad you found it helpful! Congrats on the new radios, Ham radio is a great hobby and way to help your community!
Thanks for the great tutorial. How did you get the blue background with white text? Looks good and easy to read.
Thanks for this, from Scotland
That was hilarious hearing it speak Chinese to you! I might set that on mine just for the laughs.
Love the UV-5R. super video the tip with the name and the frequenze under was the best one. If you could recomend a wired antenna for someting like an RV, camper, a 4x4 for more range, or in my case a baby carrier, so the kids get 446mhz hobby radios, I get the mobile tactical surpport babytruck, with the food and water and first aid kid, for the trips in animal parks. and I dont care if its a big one.
Really good and useful, thank you so much.
Thanks I’m hoping for more up soon. Probably get some filming done this next week.
Great video!
Can you adjust your SWR on one of these after putting on that short antenna? If, so how?
Thank you.
Wonderful video
Thank you for sharing.
Why is the +- signs on the radio and what does it do? Is it good to have both on at the same time?
Hi I like your content
When you set it up so the channel "name"' is on top is that frequency supposed to automatically appear below it? I can put the channel name in A but to see that frequency I have to go to B and set it to the same channel manually.
Thanks
THANKS for TDR-34 :)
I have a GMRS license and five HT’s just incase one breaks (they’re cheap, but reliable being Baofengs) which is great! Recently ordered a Retevis RA86 GMRS micro mobile for my car and am going to set up a base station eventually at home for my wife incase phone lines/internet go down to reach me clearly a few miles away. I’m thinking about getting my technician license for ham to have more watts for more distance as well as access to VHF and eventually HF legally. UHF is great for where I’m at in the city with all of these buildings though at the moment.
How did you get the blue background with white text?
I have a Baofeng AR-152 i cant figure out how to store a frequency or send a tone for repeater.
You can change the time the screen is lit from 3 seconds to 8 seconds. That was one of the first things I changed.
How?
Good stuff, Menu items 21 & 22 require software to actually program in the names you want to see. It would be great to know the CHIRP screen names for the numbered items you talked about so that you can find these items in CHIRP. I'm not sure the names used in CHIRP are the same as the Menu names on the radio. Thanks.
Joe, when in CHIRP, after you've downloaded the radio information; click on the settings tab on the left hand side under memories, you should now be in the Basic Settings, find Display Mode (A) & (B). They have drop down menus, A is the top display, B is the bottom. Hope this helped.
Much better…thanks
Your welcome! Glad it helped!
Next video set your ABR to 10. At least for demonstration purposes since it keeps timing out the backlighting while your talking and pointing at the display. Good info, these Baofengs are fun to mess with.
That was my first though too ;)
Great video and info Bob! I just got a Baofeng and made the changes you recommended. One issue I'm having is that when i depress the handheld it switches channels to the lower frequency on the screen. Is there any way to disable this? Thanks!
Change the TDR-AB Function, 34.
can anyone advise how i can get my baofeng to transmit on on gmrs................
can I turn off flashlight button in settings, that I don't turn on it accidentally?
+1 for 21th menu option....didn't know
Great tutorial. Thank you. Is that a vice holding the radio? Great idea! - Dave - KB1YRF
Yeah! I wanted something to hold the radio still in the video! I wish I had thought to turn the backlight timer up so it would stay on longer.
Great video bc the instruction manuels dont help at all in useing and changing the functions of the radio programming etc
My UV5R ignores any offset value I enter. In chirp it will allow me to use “split” to set the specific transmit frequency, but if I try to enter an offset instead it always reverts to zero.
Not sure if you figured it out yet but I was having that issue trying to change to narrow band and it would just remove it the second I got out of the menu options. I figured it out though. You just need to be in frequency mode, put in the frequency then go to the menu and you can change some settings. Apparently if you are in channel mode the menu will not let you overwrite some of the settings since the channel was already saved. So you need to basically start over with frequency then change all the frequency specific settings in the menu then you can delete the old channel and save the new channel. Kinda a pain but it does work that way.
Quick question: I have two (2) Baofeng UV-5Rs. I have them set and programed identically the same in the menu. I also have them on the same frequency. When I transmit from Baofeng radio # 1 to Baofeng radio # 2 it works fine however when I try to transmit from Baofeng radio # 2 to Baofeng radio # 1, the Baofeng radio # 1 will not pick up the transmission from the other Baofeng radio #2. SO I cannot hear any signal/transmission from Baofeng radio # 1. Do you think there is something wrong with Baofeng radio # 1?
I reset mine when I picked them up second hand,
I bought a bf-f8+ I was wondering what kind of extended battery I should get because I heard some of the extended batteries for baofeng radios don’t work interchangeably.
PLS HELP
amzn.to/3BwlADC
These should work great in the bf-f8+
Thank you
Can you transmit with local PD & Fire??
I don’t recommend it. As its a good way to end up with hefty fines. Now if you are a member of the department and have permission well that’s between you and the department.
Can I set aviation frequency on this radio?
The radio is a FM radio. Most aviation is AM I believe. And the radio only goes down to 136 which is where the top of the Air band stops.
How did you set your LCD screen that way?
I was just thinking the same thing and seen your comment. I know there are variations of Boafeng radios and manufacturers. I believe the BTech is the original version and they are slightly more expensive. I just got the GT-3TP Mark III and the screen can be harder to read and isn’t as clear as the original UV-5R. I think I might return them and get the UV-5R due to compatibility issues with batteries and such and also the inability to fit a upgraded antenna
If you watch my menu setting video I covered how and why I set up my LCD the way I did!
@@GetYourCommsUp I just realized the reversed LED was model specific. 👍
Can't you make the menu time out off sooner, so that we can't see it at all
Hi would you consider programming my UV5R for a fee?
If you in my area N. Idaho I could help you out. Otherwise you’ll want your local frequencies programmed in. I am working on a video on how to find your local frequencies and how to program them in.
Hi Bob, I am in Tenneessee (Foothills of the Great Smokey Mountains) but I could easily ship it to you. I am interested in all the FRS, GMRS, MURS, color DOT and NWS. I have my Technician Class, I can try to look up some local repeaters for you also. This radio will be for a get home bag. I have the cigarette lighter cord and I will probably gat a small Goal Zero solar pannel for it also. Thank you cliff70chevy@gmail.com
What is that little S in the top left of the screen about?
are any more videos coming?
I have some in the queue. The last few months have been crazy. I hope to get a couple new ones posted here soon!
Good vid..but why playing Scotland the brave? Looks more like Colorado..
It’s Moonlight Piper. Lol. And I like Scottish music.
Blaine county?
It would be good to mention that without a repeater, that radio transceives effectively for about three blocks. They are continually represented as rescue or SHTF radios and that is a terrible disservice.
You get the same distance that you’re going to get with any handheld radio, Yaesu, Kenwood or Motorola. Usually a couple miles in the woods. And yeah it can be as short as a few blocks in a city.
How to cut it on where the power button at
Where the power button at on the scanner
Where is the power button at
How u name the channel
wondered same as like to know what listening to. i have new upgraded uv-5r, the tri-band one. think you need to use chip but new to this. the uv-5r is amazing isnt it ?
Sorry for the very late reply. Chirp is a free program that you can download to program the radio with. Including adding Names to each channel. I’m hoping to be back to making videos soon and how to Program and use Chirp is on my list.
How about you go through all of them , all 40 what do they mean?
" ...... after you have someone local to you program it to actually work ...... "
That video is hopefully going to be out soon!!
Lol yeah make it not beep but don't bother changing the timeout timer from 60 seconds
Baofeng
That screen timeout is annoying. 😂
Yeah I figured out how to change it for future videos. It’s in the settings. Didn’t even occur to me till after I had finished filming that video and was working on the editing.
:)
Go to menu Item 6 ABR before doing another tutorial please.
Thanks! I don’t know why that didn’t occur to me when I was filming this episode…. I’ll put it on the prep list for the next videos!
this radio has a mil stop on its frequency 400000-600000
100000-299999 how do I get 300000-400000? I'm think good bye poopfeng
What? Are you kidding me?
I always wonder if the Chinese are listening with their electronic devices but that just might be the xenophobic tendencies of my personal prejudices and the personal concern for my nations sovereignty overall,,, let em listen and let em come were waiting...
It's not paranoia anymore. Back in 2011 we found out the Chinese loaded most of their USB chargers with spyware in order to steal corporate data among other things. Only difference today we not only have to concern ourselves with the Chinese but also tech companies getting paid by other countries, such as Google.
That being said, I really doubt the chinese are listening through the radios because radio transmissions themselves are unencrypted as is. So anyone can listen in on their own radio.
Slow the hell down