Honda no start flashing green key easy fix broken key ▶️Purchase replacement Key on Amazon: amzn.to/2sLXzW9 This video description contains affiliate links.
Soooo glad I saw this video!!!! I bought two shells for my keys and they didn’t work at first. All I did is remove the chips with a box cutter gently and used a small piece of electrical tape to secure it in inside the shell. And they worked perfectly 🥰🥰🥰 it saved me $ 700 plus because Honda wanted to charge me $350 per key.
What allows the car to start is called a transponder (gets programed to match the on board igintion system ) the door lock/unlock "green circuit board" it's programmable by owner. When buying a replacement match the FCC ID and model number to original let fob the info (listed inside the plastic outer shell on the back of electronic cover). If you wanna save A lot of money you can purchase a key copy device at local auto parts that will plug into the OBD II and it reads the copies the correct info onto the new transponder. Hopefully this helps someone.
my car remote key was broken and I was unable to start my car with the key alone. I spent hours to figure out the root cause. Now, I knew it was because of that immobility chip on the fob. Thanks for this very useful video.
Thanks for video! I saved so much money by ordering key fob from Amazon. Works perfectly!! Try this first before going to dealership. I was told it would cost 110.00 for key 150.00 for programming. Doesn’t make sense. Thanks again.
I pretty much just pryed the transponder chip out of the original shell with a mini flathead, and used some electrical tape to wedge it in place inside the new shell. Also I used some strips of e. tape inside the case to wedge the buttons in snug to prevent any rattling. The whole process took about 30-40 minutes. Good luck👍🏾
This is the first video I've seen that talks about the immobility chip - Thank you! I ordered two blanks for a 2006 Pilot, had the key ground, and programmed the lock/unlock. But the key wouldn't allow the car to start. I figured it must be something like this immobility chip, but had never heard of it. Now I know!
On the sides of the immobilizer chip all you have to do is press in the two little things on the side and the top piece comes off and the immobilizer chip will fall out and just take note of the position that it's in in your key and then you can put that immobilizer chip into your new key and then snap the little lid for the immobilizer chip back on you don't have to glue it in it all snaps back together
Thanks for the video. I figured out how to take out the chip. The chip is inside a plastics wall. We can cut the wall gently from the side then pull the chip out. There is one drop of glue or sticky foam on the bottom of the chip. Not too bad.
I bought a replacement smart key for my Nissan and infinty. The Infinity was off brand the Nissan was refurbished. They were both under $40. I took them to Batteries + Bulbs and they programmed and cut both keys for $49 each. Its still a lot cheaper than the dealership.
Thanks so much! I only have one key & it’s so worn & old I thought I was going to have to shell out twice as much for a new one. Their site list programming fee as $69.99 ( Additional key cutting or programming fee may apply )
2024 update on price Honda charges $100+ $90 for programming for the key and fob. Valet key is $40 + $90 for programming. Honda CRV. Thank you for this video!
Buy the blank keys from ebay ($13 delivered). Have the keys cut at ACE or wherever ($15 each). I have a honda hds him so i can program keys as easily as FCA vehicles. If you live in the Metro Detroit area, I can help register keys that START the vehicle and have spares. Even if you have no programmed keys available.
Te mereces mil millones de likesssss mi marido quisiera cambiar la batería de la llave y..... Le pregunto... que es esa cosita negra que se cayo... y el dice nose algo que se partio y..... lo boto a la basura. Y el auto no encendí y no encendí reviso batería reviso fusible y nadaaaa y vamos como 20 videos. Hasta que la maracilla del mundo aparecio Tu hermoso video!!! Y nos dios cuenta que la cosita negra que el había tirado a la basura era el chip!!!!!! OMG resuelto el problema!!!!! 😍
Getting it coded and programmed is roughly around 100 to 150 now. There is a difference between coded and programmed. Coded gets ur car to start and programmed gets the remote functions to work ie. lock unlock doors
I just had a new key in a key fob made at dealership and it cost me $184 if I saw this video it will save me a lot of money. I have a second key so I’m Definitely gonna be cutting out the chip and get a new case. New case on Amazon is eight dollars or less
Omg I wish I would have seen this video first I changed my key fob and I the trashed the old one thinking the chip was in the part that open and lock door..🤦🏾♀️🤦🏾♀️ now I only has the regular key to start my car .. so will my car continue to start with the other key just fine?
Your link takes us to a search results page that displays many options but from what I can see and the reviews + the question and answer section most if not all of these shells do not contain a place to transfer your existing transponder into the new shell...Nice video though. Just wish you had a specific link for a NEW shell with the transponder holder included 😕
I just bought a 2006 pilot and it only came with the valet key.... It worked for a week but now I'm unable to enter ... So I got pump and wedge kit and was able to get in... but with alarm screaming...was attempting to disconnect alarm from front hood but couldn't get the sensor to disconnect so decided not to touch it I didn't want to mess up the fan or anything in the front... lol so for the neighbors sake I closed the door and locked it up again and ordered the key Fob it's arrived today (mind you I've been stuck in the country for a week and a half because of this 😣) so fob is... same exact one in middle above in your video ... now I have to break back into the car.... And try to program but will it even allow me to do so? .... Last time once I broke into my car I was able to use the valet key to start the engine but for some reason it won't unlock the drive door... And this gray key is plain with no bottons ..... I'm worried that if the alarm doesn't turn off it may not program? I'm also worried that if I keep setting off the alarm I might kill my battery and really get stuck .....I was watching videos about programming it and they say to be sitting inside the car with a car doors unlocked ... How do I put it in programing mode ....I really don't have money for a locksmith and my brother and Dad's are in New York so I can't call them over...i definitely have to figure this out on my own Any advice Once I open that door again with the kit and the alarm is screaming...and my new key fob from Amazon is not cut as the valet key Does it need to be cut? Will I'd be able to stick it in the ignition to go to one or two to program? Sorry such a long question
I suppose you could however, that will likely be very challenging to pull off. The blade is not likely to match perfectly. If it’s in your budget, I would recommend calling the dealership and see how much they want for a new key for your car. It ranges between $250 - $600.
Honda wanted $167. Locksmith $87. The locksmith key works. Idk if there was a key. But now it doesn’t work to unlock the doors. It works in the ignition
My dealership charged me $100 + tax for a new key shell (no programming). 4 years later, it's broken again, so I will try an Amazon shell instead this time.
2009 Civic. I bought a new case that came with a blank uncut key. For some reason, my old key doesn’t have the chip you’re showing on the side, so I think the case would work, but I can’t figure out how to get the blank uncut key out. Any information would be great.
Washed my car key..honda fit key..in washer machine by accident. It worked on and off after...now the lights on key light up when you push button but it doesnt open or close the locks. Am i screwed? 150 to replace at american lock. 400 at dealer
I’m having problems finding the right new case for the key for a 2011 Honda fit. I bought one on Amazon but it doesn’t fit quite right and I can’t get it closed the screw holes don’t match up and it won’t lock securely or let me put a screw in it. Does anybody know how to get a case for a 2011 Honda fit?
Okay guys i need help, so i bought a new key fob for 2003 honda accord and i accidentally threw away old key fob with the chip, can i be the transponder chip separately? if i get a new transponder chip, can i program it myself?
I cut out the sensor and attached it to the new innards of the new fob. It wasn't that hard to get the sensor out and I don't think I damaged it. I programmed the remote and it unlocks and locks the car, but the car will not start (just turns over). Sad face. Sad wallet.
Do you know of any ekc for the valet key? I seen one video where a guy put it in a drivers door. Then had to turn it to lock and unlock the drivers side door a bunch of times until the car unlocked. It was a certain sequence. Like 6789. 6 times to the left 7 times to the right and so on. Then after you here the unlock. You lock it. Then unlock and it will start the car. So have you ever seen or heard of this?
So. The whole ignition has been replaced from a Key FOB. to just chiped keys ..but did not come with an immobilizer.. The Immobilizer came from a 2004 HONDA ACCORD pull.a.part vehicle. I put it all back together . I still have the key fob that is programed to the car. The key fob unlockes the car . I tried the chipless gray valet key and the key fob to start the car but it sill isn't reading the original chip. I tried to sync the 2 other chip keys to program the immobilizer but still not working. I'm trying to avoid the HONDA DELERSHIP. and the app and plugins.
HELP HELP!! Torn on wether to call a locksmith or try it myself .... I lost my keys at work.... we were moving to a new school and they must’ve fell in the garbage. I have the actual key which fell off my original fob.... but the fobs are gone... so can i buy a new fob and program it since i do have the original key?
2004 accord only came with valet key. The valet key goes into the glove compartment but is stopped by metal stems on valet key which causes it not to lock it. Can a locksmith use the valet key and make a new key and make the new one a master key by not including the stoppers that's on the valet key
I bought 3 batteries for my 2006 Honda Accord and it works as soon as I leave the store. But the very next day when I am trying to unlock my doors it does not work. What should I do since I have a brand new battery ?
Hey I put a new battery in my fob the car starts everything's fine unlock the car now or open the trunk with the buttons and it won't lock the car but it unlocks the car
Ok I live in CT the cheapest price I got from a hardware store that does the programing was$180+ tax a bit steep right. So now I’m trying to find out how to programs one myself and get it cut
I have this same problem. But i tried to start the car with the broken components, OUCH!! 😡😂😂 I will be buying a new key from the dealer. I'm so sad about it
Okay so I have the chip from an old broken remote no inside components but the only key I have is the grey valet key if I buy a new key fob make it a copy of the valet key and put the chip in can I program the new remote?
Teacher Talks!!! Okay thanks read on another video people tried it with a valet key and it would stop working for some reason and they ended up having to call a locksmith
Those transponder chips are not really hat hard to remove. One of mine was loose and one came out with a pick and just a little prying. Those chips are not all the same though. You need the correct one for the vehicle. Some operate at different frequencies, etc.
The Honda keys anger me. Such a shit 'garunteed to break' design. I have loctite and epoxy nearby. But I need it to be sturdy again but I would like to change the battery again one day.
Ace Hardware took 25 minutes to quote me $185 for a Mazda valet key. Took it to a locksmith, a block away, who did it in under 5 minutes for $75 total.
I have a honda fit 2009 and there is no chip inside my key. I had my locksmith transfer it to a new shell and also had the key cut for about 10 bucks. Besides once the original screw is damaged you are really screwed. I had to eat into the plastic beacause the screw would not come off and upon insisting it got damaged.
Solution get a paper clip to hold ur key in your key chain open the door open ur glove compartment take out the broken shell the side with the chip and when you use that naked key make sure you bring the shell close enough to the ignition when u turn ur key save ur ass 200 dollars once the car turns on out that she'll back in the glove compartment and when u turn ur car off put that lonely key in your purse or murse
No you cannot use a key that is simply cut. However, if you still have your valet key and you can use that to unlock the doors and start/drive the vehicle. There are a few things you cannot do with the valet keys such as unlock the glove box and trunk etc.
You need a key programmer (all keys lost) Program the new cut (fob key as the master key) The grey key is a valet key, not a master key. When you reprogram the keys, you must add all keys back in to be programmed at the same time, (the machine tells you how and when to cycle on and off
Watch this link to see how this man uses a long nose plier to twist away bits of plastic around the little transponder or chip box. He grabs pieces and twists and pulls pieces of the actual little box off until he can gently grasp the bottom of the chip where it is glued and pulls it loose. Then plus it into the spot in the new fob. ua-cam.com/video/qsYxTn8Nv9w/v-deo.html
Thanks! Here's a few bucks to say thanks for. the video!
Soooo glad I saw this video!!!! I bought two shells for my keys and they didn’t work at first. All I did is remove the chips with a box cutter gently and used a small piece of electrical tape to secure it in inside the shell. And they worked perfectly 🥰🥰🥰 it saved me $ 700 plus because Honda wanted to charge me $350 per key.
What allows the car to start is called a transponder (gets programed to match the on board igintion system ) the door lock/unlock "green circuit board" it's programmable by owner. When buying a replacement match the FCC ID and model number to original let fob the info (listed inside the plastic outer shell on the back of electronic cover). If you wanna save A lot of money you can purchase a key copy device at local auto parts that will plug into the OBD II and it reads the copies the correct info onto the new transponder. Hopefully this helps someone.
i know it's pretty off topic but does anybody know a good website to stream new tv shows online?
@Casen Dwayne Lately I have been using Flixzone. Just search on google for it =)
@Isaias Aries definitely, I have been watching on FlixZone for since april myself :D
@Isaias Aries definitely, been using Flixzone for since march myself :D
@Isaias Aries thanks, signed up and it seems like a nice service :) I appreciate it!
my car remote key was broken and I was unable to start my car with the key alone. I spent hours to figure out the root cause. Now, I knew it was because of that immobility chip on the fob. Thanks for this very useful video.
how did you fix it ?
Thanks for video! I saved so much money by ordering key fob from Amazon. Works perfectly!! Try this first before going to dealership. I was told it would cost 110.00 for key 150.00 for programming. Doesn’t make sense. Thanks again.
You’re welcome! Happy to help! Thank you for the kind comment.
I pretty much just pryed the transponder chip out of the original shell with a mini flathead, and used some electrical tape to wedge it in place inside the new shell. Also I used some strips of e. tape inside the case to wedge the buttons in snug to prevent any rattling. The whole process took about 30-40 minutes. Good luck👍🏾
Good idea, I did the same and it worked for me!
This is the first video I've seen that talks about the immobility chip - Thank you! I ordered two blanks for a 2006 Pilot, had the key ground, and programmed the lock/unlock. But the key wouldn't allow the car to start. I figured it must be something like this immobility chip, but had never heard of it. Now I know!
On the sides of the immobilizer chip all you have to do is press in the two little things on the side and the top piece comes off and the immobilizer chip will fall out and just take note of the position that it's in in your key and then you can put that immobilizer chip into your new key and then snap the little lid for the immobilizer chip back on you don't have to glue it in it all snaps back together
i had to buy a new chip. will the new chip work when i rebuild with my old key?
Thanks for the video. I figured out how to take out the chip. The chip is inside a plastics wall. We can cut the wall gently from the side then pull the chip out. There is one drop of glue or sticky foam on the bottom of the chip. Not too bad.
You’re welcome. Thank you for the kind comment 👍
I've been dealing with these issues involving my 2006 honda Pilot. Good video, I've done all.
Same w my 2006 honda pilot
I bought a replacement smart key for my Nissan and infinty. The Infinity was off brand the Nissan was refurbished. They were both under $40. I took them to Batteries + Bulbs and they programmed and cut both keys for $49 each. Its still a lot cheaper than the dealership.
Thanks so much! I only have one key & it’s so worn & old I thought I was going to have to shell out twice as much for a new one.
Their site list programming fee as $69.99 ( Additional key cutting or programming fee may apply )
2024 update on price Honda charges $100+ $90 for programming for the key and fob. Valet key is $40 + $90 for programming. Honda CRV. Thank you for this video!
Thank you for the information, I was able to learn about the specifics of the key people refer to about programming, you're awesome!
You’re welcome. Happy to help. Thank you for the kind comment.
Buy the blank keys from ebay ($13 delivered). Have the keys cut at ACE or wherever ($15 each). I have a honda hds him so i can program keys as easily as FCA vehicles. If you live in the Metro Detroit area, I can help register keys that START the vehicle and have spares.
Even if you have no programmed keys available.
Te mereces mil millones de likesssss mi marido quisiera cambiar la batería de la llave y..... Le pregunto... que es esa cosita negra que se cayo... y el dice nose algo que se partio y..... lo boto a la basura. Y el auto no encendí y no encendí reviso batería reviso fusible y nadaaaa y vamos como 20 videos. Hasta que la maracilla del mundo aparecio Tu hermoso video!!! Y nos dios cuenta que la cosita negra que el había tirado a la basura era el chip!!!!!! OMG resuelto el problema!!!!! 😍
Best explanation & helpful guy 👍🏻
Getting it coded and programmed is roughly around 100 to 150 now. There is a difference between coded and programmed. Coded gets ur car to start and programmed gets the remote functions to work ie. lock unlock doors
Better said💯
I was quoted by a locksmith at 179 for replacing the key. ridiculous since I replaced the door handle for almost the same price.
I just had a new key in a key fob made at dealership and it cost me $184 if I saw this video it will save me a lot of money. I have a second key so I’m Definitely gonna be cutting out the chip and get a new case. New case on Amazon is eight dollars or less
Thank you for the kind comment 👍
Omg I wish I would have seen this video first I changed my key fob and I the trashed the old one thinking the chip was in the part that open and lock door..🤦🏾♀️🤦🏾♀️ now I only has the regular key to start my car .. so will my car continue to start with the other key just fine?
Hope this video helped you out!
▶️Purchase related products on Amazon: amzn.to/2sLXzW9
This video description contains affiliate links.
THANK YOU AGAIN, you the best. 🌷
The links not working bro
Your link takes us to a search results page that displays many options but from what I can see and the reviews + the question and answer section most if not all of these shells do not contain a place to transfer your existing transponder into the new shell...Nice video though. Just wish you had a specific link for a NEW shell with the transponder holder included 😕
2011 Honda Pilot here. Same problem. Honda told me $240 today 😭 I can’t afford to get a key for my car.
Try a local locksmith
Now imagine it were a Mercedes! 😂😂😂
Doing this watching the video. It's very easy to break open original fob and swap it into new housing...
How do you program a fob to just unlock the doors? I only have the valet key.
Hi, we can do replacing and programming key from jaukyard ?
I just bought a 2006 pilot and it only came with the valet key.... It worked for a week but now I'm unable to enter ... So I got pump and wedge kit and was able to get in... but with alarm screaming...was attempting to disconnect alarm from front hood but couldn't get the sensor to disconnect so decided not to touch it I didn't want to mess up the fan or anything in the front...
lol
so for the neighbors sake
I closed the door and locked it up again
and ordered the key Fob
it's arrived today
(mind you I've been stuck in the country for a week and a half because of this 😣)
so fob is... same exact one in middle above in your video
... now I have to break back into the car.... And try to program but will it even allow me to do so?
.... Last time once I broke into my car I was able to use the valet key to start the engine but for some reason it won't unlock the drive door... And this gray key is plain with no bottons
..... I'm worried that if the alarm doesn't turn off it may not program? I'm also worried that if I keep setting off the alarm I might kill my battery and really get stuck
.....I was watching videos about programming it
and they say to be sitting inside the car with a car doors unlocked
... How do I put it in programing mode ....I really don't have money for a locksmith and my brother and Dad's are in New York so I can't call them over...i definitely have to figure this out on my own
Any advice
Once I open that door again with the kit and the alarm is screaming...and my new key fob from Amazon is not cut as the valet key
Does it need to be cut?
Will I'd be able to stick it in the ignition to go to one or two to program?
Sorry such a long question
Great video , yet I'm still wondering how I can identify the chip for mine. I have a fob for the honda civic 2011
Hi quick question can I use a valet key and it’s chip to a fob off Amazon because I had bought a car off Facebook but only got a valet key
I suppose you could however, that will likely be very challenging to pull off. The blade is not likely to match perfectly.
If it’s in your budget, I would recommend calling the dealership and see how much they want for a new key for your car. It ranges between $250 - $600.
Honda wanted $167. Locksmith $87. The locksmith key works. Idk if there was a key. But now it doesn’t work to unlock the doors. It works in the ignition
Idk if there was a chip.
Thank you & thanks for the kind comment!👍😎
Very good video so informative
Thank you for sharing the solution!
Thanks so much that is the video that I was looking for 🙏
My dealership charged me $100 + tax for a new key shell (no programming). 4 years later, it's broken again, so I will try an Amazon shell instead this time.
2009 Civic. I bought a new case that came with a blank uncut key. For some reason, my old key doesn’t have the chip you’re showing on the side, so I think the case would work, but I can’t figure out how to get the blank uncut key out. Any information would be great.
Can I just use the old key, put it in the new fob including the inside components of the broken (stock) fob? To save on duplicatinf a new key?
Yes just don't forget the chip , little black plastic piece that is glued to one side of the original key fob
You’re welcome. Thank you for the kind comment 👍
You’re welcome. Thank you for the kind comment 👍
I just would’ve kept the broken FOB on my ring, maybe put some glue on it and used the valet key to start the car.
That’s what exactly what I’ve been doing for over a year! 😊
Work perfectly. Great
Is there a way to add new little buttons to my existing key fob? The lock and unlock button images faded off and would like to add new little buttons.
Washed my car key..honda fit key..in washer machine by accident. It worked on and off after...now the lights on key light up when you push button but it doesnt open or close the locks. Am i screwed? 150 to replace at american lock. 400 at dealer
I bought the 2005 honda pilot with broken key fobs it starts & runs but the alarm system gos off & don,t quit ?
Awesome 🤩
You’re welcome. Thank you for the kind comment 👍
Thank you!
You’re welcome. Thank you for the kind comment 👍
Well said well touch
Thanks 👍
Thank you for this great video👍🔔
I’m having problems finding the right new case for the key for a 2011 Honda fit. I bought one on Amazon but it doesn’t fit quite right and I can’t get it closed the screw holes don’t match up and it won’t lock securely or let me put a screw in it. Does anybody know how to get a case for a 2011 Honda fit?
What if my shell doesn't have a chip inside of it? Can I simply just get a new shell case to hold the existing remote and key?
Okay guys i need help, so i bought a new key fob for 2003 honda accord and i accidentally threw away old key fob with the chip, can i be the transponder chip separately? if i get a new transponder chip, can i program it myself?
I cut out the sensor and attached it to the new innards of the new fob. It wasn't that hard to get the sensor out and I don't think I damaged it. I programmed the remote and it unlocks and locks the car, but the car will not start (just turns over). Sad face. Sad wallet.
Do you know of any ekc for the valet key? I seen one video where a guy put it in a drivers door. Then had to turn it to lock and unlock the drivers side door a bunch of times until the car unlocked. It was a certain sequence. Like 6789. 6 times to the left 7 times to the right and so on. Then after you here the unlock. You lock it. Then unlock and it will start the car. So have you ever seen or heard of this?
The chip is directly in the center of the key . I just took the hard plastic off the gray key.
So. The whole ignition has been replaced from a Key FOB. to just chiped keys ..but did not come with an immobilizer.. The Immobilizer came from a 2004 HONDA ACCORD pull.a.part vehicle. I put it all back together . I still have the key fob that is programed to the car. The key fob unlockes the car . I tried the chipless gray valet key and the key fob to start the car but it sill isn't reading the original chip.
I tried to sync the 2 other chip keys to program the immobilizer but still not working. I'm trying to avoid the HONDA DELERSHIP. and the app and plugins.
I want to be able to lock/unlock my CRV with FOB while my 2002 CRV is running. Any suggestions?
HELP HELP!! Torn on wether to call a locksmith or try it myself .... I lost my keys at work.... we were moving to a new school and they must’ve fell in the garbage. I have the actual key which fell off my original fob.... but the fobs are gone... so can i buy a new fob and program it since i do have the original key?
2004 accord only came with valet key. The valet key goes into the glove compartment but is stopped by metal stems on valet key which causes it not to lock it. Can a locksmith use the valet key and make a new key and make the new one a master key by not including the stoppers that's on the valet key
I bought 3 batteries for my 2006 Honda Accord and it works as soon as I leave the store. But the very next day when I am trying to unlock my doors it does not work. What should I do since I have a brand new battery ?
I have the same problem do you found what is it? Please.
Ik this video is old but I bought every replacement key and the design is horrible how do I get a valet key?
I am having issues starting my honda jazz . Key fell down now car wount start, green key showing on the dash board
For 2013 honda civic. Dealer price in my area. $150 to repair. $ 250 to replace.
In the new case we have to put any chip or new one
You’re welcome. Thank you for the kind comment 👍
I broke my honda city 2015 key, it is a two button. I didn't find this small chip inside. What does it mean.
Just buy the shell and move everything to the new shell,I did it to my ridgeline it works good.
I think Virginia Beach Honda charged around $150 for an additional key to my 2011 Accord earlier this year.
better than $285 at Joyce Koons in Manassas. This is a scam! You have to go to the DEALER to get a KEY? Thanks for this youtube!
Hey I put a new battery in my fob the car starts everything's fine unlock the car now or open the trunk with the buttons and it won't lock the car but it unlocks the car
get the Stauber key fob shell for that honda key fob that broke
I have an 07 civix lx and the chip is in the electronic divce on in the case
My battery has been dead for a while and I've been able to drive the car w/ just the key w/o any innards.
You’re welcome. Thank you for the kind comment 👍
Ok I live in CT the cheapest price I got from a hardware store that does the programing was$180+ tax a bit steep right. So now I’m trying to find out how to programs one myself and get it cut
I have bought it for five dollars and put only the key. No programming or anything. Just put the key into shell and that's it
You probably dont have a immobilizer
I think the best thing to do is to go to the dealership and pay the money if you’re in a hurry
Honda dealership told me $125 for key and $125 for programming for a Honda CR-V 2005
Stull f###ing ridiculous.
I just paid 187.00 for my 2005 CRV
I have this same problem. But i tried to start the car with the broken components, OUCH!! 😡😂😂 I will be buying a new key from the dealer. I'm so sad about it
How did it go. Did you purchase your new key? I'm thinking might be my chip that went bad
Okay so I have the chip from an old broken remote no inside components but the only key I have is the grey valet key if I buy a new key fob make it a copy of the valet key and put the chip in can I program the new remote?
G G Yes! this should work.👍
Teacher Talks!!! Okay thanks read on another video people tried it with a valet key and it would stop working for some reason and they ended up having to call a locksmith
On the 07 Honda civic where is the chip?
Those transponder chips are not really hat hard to remove. One of mine was loose and one came out with a pick and just a little prying.
Those chips are not all the same though. You need the correct one for the vehicle. Some operate at different frequencies, etc.
Thank you so much bro u saved my money 😊
I have an old accord 2007 key fob. My car got totalled. Can i sell it on ebay?
The Honda keys anger me. Such a shit 'garunteed to break' design. I have loctite and epoxy nearby. But I need it to be sturdy again but I would like to change the battery again one day.
how does this help you just told us nothing more than it is going to cost allot at honda I think everyone already knows that
Ac hardware will cut the key for 25 dollers
Got to ACE hardware make a copy of it and program the key for you it's like 60-80 bucks
ACE botched the cut my oem key wasted $80 very cool
Ace Hardware took 25 minutes to quote me $185 for a Mazda valet key. Took it to a locksmith, a block away, who did it in under 5 minutes for $75 total.
My car can start without the key fob but now when I open the door or turn the car on the alarm goes off
Kool
You can reset the new key really easy. I bought two on amazon and reset them both.
How do you reset the key
@@papimami3 I seen a video I'm look for the link
@@heyyeshyou this doesn't program the chip transponder issue, only the keyless entry
I have a honda fit 2009 and there is no chip inside my key. I had my locksmith transfer it to a new shell and also had the key cut for about 10 bucks. Besides once the original screw is damaged you are really screwed. I had to eat into the plastic beacause the screw would not come off and upon insisting it got damaged.
Yes! That’s what happened to mine as well.
My original screw was replaced. Then the shell was replaced. Now it won't stay close....help. l don't want to come off 180 for a key
I hAve key collection
Solution get a paper clip to hold ur key in your key chain open the door open ur glove compartment take out the broken shell the side with the chip and when you use that naked key make sure you bring the shell close enough to the ignition when u turn ur key save ur ass 200 dollars once the car turns on out that she'll back in the glove compartment and when u turn ur car off put that lonely key in your purse or murse
Thank you & thanks for the kind comment!👍😎
My key doesn’t have that chip? 2011 Honda Pilot
It wouldn’t work without it.
Kelly Davis in Macon GA 🍂
At the dealer about $240 a key
bro rs good looks 😂🙏🏽
So if we don’t have the original chip we can’t do anything ?
If you don’t have a chip you’ll need to check in with the dealer. Your valet key should have a chip in it too. If you still have that one.
That is false you can it you would only be able to have it to accessory mode which is the the 2nd position on your hole that you stick your key into
I’m currently driving with that a key 👍
Check It Out !!! So if it’s just the key cut out with nothing else I can drive it ?
No you cannot use a key that is simply cut. However, if you still have your valet key and you can use that to unlock the doors and start/drive the vehicle. There are a few things you cannot do with the valet keys such as unlock the glove box and trunk etc.
How do I go from the single key without the fob (grey key) to a key with the fob ?
You need a key programmer (all keys lost)
Program the new cut (fob key as the master key)
The grey key is a valet key, not a master key.
When you reprogram the keys, you must add all keys back in to be programmed at the same time, (the machine tells you how and when to cycle on and off
Who is this
Chris fixes cousin. Just kidding.
Bro my key broken and coped parts lost
Watch this link to see how this man uses a long nose plier to twist away bits of plastic around the little transponder or chip box. He grabs pieces and twists and pulls pieces of the actual little box off until he can gently grasp the bottom of the chip where it is glued and pulls it loose. Then plus it into the spot in the new fob. ua-cam.com/video/qsYxTn8Nv9w/v-deo.html
excellent
A New OEM key costs $100, plus $50 for programming.
Where at?
Where at info please?
80 for the key 80 to program at
Honda
Its $250
Honda and outhers are price gouging.