Honda Key Replacement. Renew Key Fob. Easy, Fast, Cheap. Pilot, Civic, Accord, Odyssey

Поділитися
Вставка
  • Опубліковано 16 гру 2024
  • In this video I show how to replace your broken Honda key. Fast and easy low cost.
    Honda no start flashing green key easy fix broken key
    ▶️Purchase Replacement Key on Amazon: amzn.to/2sLXzW9
    This video description contains affiliate links.

КОМЕНТАРІ • 41

  • @flickboogers9325
    @flickboogers9325 Рік тому +4

    Finally a video showing the transponder!

  • @crpuravida2
    @crpuravida2 2 роки тому +5

    I saw a ton of videos and you are the only one that explained how to get the chip out... thanks!!

    • @ApatheticallyClowning
      @ApatheticallyClowning 2 місяці тому

      I found out my new used car remote doesn't even have the chip.

  • @clarindacampbell5928
    @clarindacampbell5928 2 роки тому +5

    Thank you. Our key broke and I purchased that same kit but didn't know there was a sensor that also needed to be removed. Thanks for the tutorial.

    • @checkitout2468
      @checkitout2468  2 роки тому +1

      You’re welcome. Thank you for the kind comment 👍

  • @RodneyTaylor-b5h
    @RodneyTaylor-b5h Місяць тому

    Great video--it gave me the knowledge needed to fix my fobs. 👏 👏 👏 👏

  • @izzieluv
    @izzieluv Рік тому +2

    Thabknyoubfor including how to get the transponder out!!

  • @angeldavidcastro7025
    @angeldavidcastro7025 10 місяців тому +1

    You are a lifesaver.

  • @evan7D0
    @evan7D0 Рік тому +2

    There are just some things in life that you want to leave to the professionals. Getting the actual transponder out is a huge pain, and It is very easy to damage it (despite the guy in the video down-playing how difficult it is). If you damage it, you are completely screwed and car isn't going to start.

  • @brayan162
    @brayan162 Рік тому +4

    How do I remove the key blade/actual key?

    • @richellist1
      @richellist1 Рік тому +2

      Yea, that's what i want to know too.

  • @anthonynguyen4088
    @anthonynguyen4088 Місяць тому

    Hey, I have a key for my honda accord but no key fob. If I took the key blade and chip out like this and put it into a fob like that, how would I program the car to respond to the fob? Like, when I press lock and unlock on the fob, is there something I have to do to make sure the car responds to it, or will it just detect the chip or something and do it?

  • @courtneyhenderson4929
    @courtneyhenderson4929 10 місяців тому +2

    What about getting the key part out of the fab, mine is like fused to it

    • @Youmadnoonecares
      @Youmadnoonecares 7 місяців тому

      Right I’m going through this now

    • @davidisaacson9328
      @davidisaacson9328 5 місяців тому

      Honda screwed the pooch with this key-fob type! I can't even get the darn screw out. Screw head is now rounded out!🤬

  • @jaebear68
    @jaebear68 Рік тому +2

    How do i get the key blade out of the fob?

  • @artinformation2131
    @artinformation2131 3 місяці тому

    Super helpful! Thank you!🎉

  • @tinakarl4808
    @tinakarl4808 Рік тому

    So as long as the chip is inside the key it doesn't have to be connected anywhere just put in there?

  • @Maiasatara
    @Maiasatara 2 роки тому +8

    Except you CUT THE VIDEO of actually getting chip free! The plastic casing needs to be cut to free it. Not just wiggled.

  • @Gullywavee
    @Gullywavee Рік тому

    Love your video. Very helpful. I do have a question and I hope you can help me ! I have my key but I DO NOT have the top part that has the lock button or open button . I just have the metal key part . Does the Amazon one include that or is it just the shell ?

  • @mariannelanger7423
    @mariannelanger7423 2 роки тому

    Thanks for this video. With this kit there is a trick to not breaking the new kit.
    If you have a one piece sleeve the key goes into you then need to SLIDE the entire combo into the new key fob making sure the narrow ends line up. There are grooves in both ends of the part the key slides into. Those grooves align with grooves in the new key fob base. The combo ( key and part you slid it into) must SLIDE into the key fob base.
    If you do this the key fob will close relatively easily without needing to be forced. If you have to force it somethings wrong and it will break.
    Good luck.

  • @twil032
    @twil032 2 роки тому +5

    I can't find the chip on my key fob

  • @lynncarr6839
    @lynncarr6839 2 роки тому +1

    Cannot find a replacement fob without the new uncut key blade molded into its frame for 2013 Honda Odyssey.

    • @checkitout2468
      @checkitout2468  2 роки тому

      Gotcha, consider the one that is molded in And then you should be able to take that to a hardware store to have it cut for very cheap

  • @sukhmanrandhawa3567
    @sukhmanrandhawa3567 Рік тому

    hi any other why to get that chip out? its really getting hard

  • @freewithbre
    @freewithbre Рік тому

    Hmm, my 2012 key does not seem to have that chip, or a spot for it. Is this normal?

    • @alamsyyd635
      @alamsyyd635 5 місяців тому

      Neither does my 2009

  • @mrd7051
    @mrd7051 11 місяців тому

    When did they start using the chip?

    • @kevincondit79
      @kevincondit79 6 місяців тому

      I have a 2006 that has it. I'm not sure when they started using the chip.

  • @ashleethorpe2165
    @ashleethorpe2165 Рік тому +1

    My 2012 honda key doesn't just pop out the black piece it's in do I break it off

  • @LeeCrump-t6v
    @LeeCrump-t6v Рік тому

    What year was this key fob from? I am replacing a shell for a 2012 accord but i do not see a chip?

  • @Cheeky_Goose
    @Cheeky_Goose Рік тому

    These third party cases break a lot easier than the OEM for whatever reason. If only they moved to polycarbonate or nylon, then it would be perfect

  • @miniyggdrasil4952
    @miniyggdrasil4952 2 роки тому +1

    Work

    • @checkitout2468
      @checkitout2468  2 роки тому

      You’re welcome. Thanks for the kind comment.

  • @Juanhvs
    @Juanhvs 2 роки тому +1

    Thanks brother 🙏 good video

    • @checkitout2468
      @checkitout2468  2 роки тому

      You’re welcome. Thanks for the kind comment. 👍😎

    • @mr.magicgkan.arewamagic.re135
      @mr.magicgkan.arewamagic.re135 Рік тому

      @@checkitout2468 pl can i replace new key blade into old fob and still work without programming?

    • @checkitout2468
      @checkitout2468  Рік тому

      @@mr.magicgkan.arewamagic.re135 yes, that should work.