Nice video! It’s always a good idea to take a look all around the machine before getting technical. I have followed up on a lot of technicians with parts they ordered when I worked for a big box company…only to find a loose connection 😅…gotta look
I have the same type of washer dryer set up. I am trying to change the belt on the washer so that it will spin. I have already taken the bottom off looking for a belt and did not see one. Where would I look to find the belt for my dryer? Thank you.
Mine continues to click once the door is closed and it will not unlock. I replaced the lid switch. What causes it to continue to click but won’t start?
Just had same unit today. And washer does is locks the lid, drains for 5 sec and then nothing. I did not check wires but I thought it is the main board issue . What do you think?
I have this model and i changed the lidlock switch last month. It was working ok. Now when i try to start a cycle it only beeps once when you try to select a particular washing cycle. It doesnt start or anything. What could be the issue?
just bought one of these flashlights $36.02 on Ebay, i will get it on 1-23-2024 i am trusting in you on this one. if it good i will buy 5 more, i will let you know what i think, will be using it everyday on Appliance repairs,,, Thanks... AT 9:50 you said you charge it once a week and use it ... with a 30 min charge time. wow ...no way thats great i just hope you are correct...
I have this same model but the dryer does not work. No buzzing, no movement, nothing happens when it's turned on. What advice might you have for troubleshooting? Are there common issues with this model that cause the dryer to not work? Great video about the washer, I will definitely be bookmarking this
For dryer if it does not start the first thing I check would be my power for 240 volts and then check all my door lock . If door lock is also ok I would check my fuse.
@@anifanhkg if you stand in front of the washer and look at the dryer straight where tue switches are on the panel , at the bottom of that switch panel .there is a white colour about 12-14 inch white panel that’s held by 2 screws from the top needs to come off .
i was told this model has 4 control panels. is that true? your machine demo is exact to mine and you only show 1 control center. the dryer works fine its just the washer
Nice video! It’s always a good idea to take a look all around the machine before getting technical. I have followed up on a lot of technicians with parts they ordered when I worked for a big box company…only to find a loose connection 😅…gotta look
Nice! As a technician, I'm always happy when I get lucky and have an easy first call complete repair.
Is not every once goal to get the job done on first visit 😂
I have the same type of washer dryer set up. I am trying to change the belt on the washer so that it will spin. I have already taken the bottom off looking for a belt and did not see one. Where would I look to find the belt for my dryer? Thank you.
To change the belt on the washer if I remember correctly it’s located at the bottom
I have removed the bottom, round cylinder and I am still unable to locate any type of belt.
Mine continues to click once the door is closed and it will not unlock. I replaced the lid switch. What causes it to continue to click but won’t start?
Would you please make a video on how to locate and replace the belt on the washing machine part of a Frigidaire stackable FFLE3911QW0
It doesn’t spin or drain.
@@DelorisBall-Podraza yes when I get a unit
Just had same unit today. And washer does is locks the lid, drains for 5 sec and then nothing. I did not check wires but I thought it is the main board issue . What do you think?
@@nurlanryssaldinov1566 always check wires first
@@hameedwafaAFG today i checked wires too, which looked normal, no damage. Can it be the door lock?
It’s hard to diagnose these units
@@nurlanryssaldinov1566 door locks are not very common , but since the part is not that expensive you might as well replace it ✌️
@@hameedwafaAFG I noticed the actuator is keep turning. Door is locked and nothing happens. Any idea?
@@nurlanryssaldinov1566 probably broken wire , which I have seen alot
I have this model and i changed the lidlock switch last month. It was working ok. Now when i try to start a cycle it only beeps once when you try to select a particular washing cycle. It doesnt start or anything. What could be the issue?
just bought one of these flashlights $36.02 on Ebay, i will get it on 1-23-2024 i am trusting in you on this one. if it good i will buy 5 more, i will let you know what i think, will be using it everyday on Appliance repairs,,, Thanks... AT 9:50 you said you charge it once a week and use it ... with a 30 min charge time. wow ...no way thats great i just hope you are correct...
This is what mine is doing and does it constantly. Right now it locked me out after trying this and I couldn’t see but nothing is disconnected?
I have the same one no losses connection but want start
I have this same model but the dryer does not work. No buzzing, no movement, nothing happens when it's turned on. What advice might you have for troubleshooting? Are there common issues with this model that cause the dryer to not work? Great video about the washer, I will definitely be bookmarking this
For dryer if it does not start the first thing I check would be my power for 240 volts and then check all my door lock . If door lock is also ok I would check my fuse.
My dryer works but it doesn't work for the full length of the cycle. Its like the board overheats before the cycle is completed
Have problem on dryer , press to start but without response, how to tackle the problem. Any idea ?
If you take the bottom cover of the dryer tech sheet is there . It can help .
Bottom of dryer ? Can you be more specific or I need to unscrew the connecting panel ?
@@anifanhkg if you stand in front of the washer and look at the dryer straight where tue switches are on the panel , at the bottom of that switch panel .there is a white colour about 12-14 inch white panel that’s held by 2 screws from the top needs to come off .
i was told this model has 4 control panels. is that true? your machine demo is exact to mine
and you only show 1 control center. the dryer works fine its just the washer
As far as I know there is display , motor control and main there could be more or only 2 main relay and display ✌️
its a very good video
It also will not fill up with water.
Still not working and they keep telling me it’s the control panel. This channel doesn’t answer meeee definitely 😂
Hahah . It must be the control panel . Lol
i took the latch keeper of the washer lid. let the latch do what ever it wants.
Where is the broken wire you keep talking about
I have the same one no losses connection but want start