There’s a few things about this case that make it good and to start out is the air flow. Next is the hinged glass side panel. Last is the fact it comes with the fans, as always it’s nice to have those included even if they are budget fans(upgrade later). Have some extra parts and would like to build another pc just for my kids and yes it’d be a very budget build
Hey bro maybe a dumb question but I'm quite new to building. I'll get an aio which I will put at the top and than move the top rgb fans to the bottom but how do I install them? I will need to remove my power supply for the screws to fit in?
Good review as always. I just don’t know why they make some choices. The only excuse for molex is because they couldn’t power it over sata, and I would have just dropped the number of fans at that point. The budget case arena is just too crowded for them to make these decisions I think.
Hey i love how you reviewed very straight about this case. its true that told that it is a Chinese steel case and its really is haha. So i bought the montech air x instead and its was really a beast like u said Thank you so much for straight review keep it up!
Can you mount To 240mm AIO coolers (one top one front)? is there enough room support with the stock fans and running push pull in front and standard on the top?
I hope you can help me. I just built my pc with this case and I'm planning to get my first gpu, but the one I'm getting is about 301 mm. From the website it says 305mm is the max vga size it can fit. Do you think i won't have issues putting the gpu inside the case and will be ok for the airflow or should i go with a shorter gpu? (I'm getting the asus tuf gaming 3060 ti)
I got an almost identical looking case made by a danish manufacturer, that ships with 6 FRGB fans, but it still costs only €47. This Montech case is totally overpriced, if you ask me. Im glad I got the cheaper and better alternative instead.
Thanks for listening to my request, I have the black version and I don’t know how I feel about the fans, I really wish they were software controlled so I could have them off when they I’m not under load. I also with I could change the rgb since it’s ugly so I always have it off since it’s non-addressable. I’ll probably pickup new fans but I wish they showed it on the website.
Sometimes its just worth it to get your own fans. I got the metallicgear neoqube (phantek's version of Lian li 011) and got those ezdiy white argb pwm fans to put in it. Good airflow, good looking and looks hella expensive even though I paid like half the price of what it looks like
I need a pc because my ps4 is broken and stoped working so now I have nothing to play on, no pc, no laptop, and no console and I don’t have enough money to buy one
Rare disagree Kosh. So $70, agree $50 for the case, so for $20, broke ass youngin gettin three 140s and three 120s with rgb. Good broke youngin value IMO brah brah.
i’m dying for this case. the design is timeless, sleek and elegant. they really hit the bullseye on this case.
There’s a few things about this case that make it good and to start out is the air flow. Next is the hinged glass side panel. Last is the fact it comes with the fans, as always it’s nice to have those included even if they are budget fans(upgrade later). Have some extra parts and would like to build another pc just for my kids and yes it’d be a very budget build
Как Вы туда поставили Систему Водяного Охлаждения если она не поддерживается в корпусе?
Hey bro maybe a dumb question but I'm quite new to building. I'll get an aio which I will put at the top and than move the top rgb fans to the bottom but how do I install them? I will need to remove my power supply for the screws to fit in?
Good review as always. I just don’t know why they make some choices. The only excuse for molex is because they couldn’t power it over sata, and I would have just dropped the number of fans at that point.
The budget case arena is just too crowded for them to make these decisions I think.
Agreed Pinky
Looking at this review, I think it’s safe to say that if I were to upgrade my case or build a new pc, I should choose the Montech air x
I was gonna get this one but then saw your other video for the air 100 and got that one instead 🙏I do like both though !
Hey i love how you reviewed very straight about this case. its true that told that it is a Chinese steel case and its really is haha. So i bought the montech air x instead and its was really a beast like u said Thank you so much for straight review keep it up!
Appreciate it bredrin 💯
Man I would love this case. I’ve been rocking the same case for almost 5 years. And the airflow is absolutely terrible.
How did you took of the front ? I’m struggling so bad to take it off
Ooooooo I like that one too! The molex connectors made me laugh. I thought those died out a in the late 2000's.
Can you mount To 240mm AIO coolers (one top one front)? is there enough room support with the stock fans and running push pull in front and standard on the top?
I just built in this case. Went great. Other than I can’t get the fans lighting to work. They spin. Just don’t glow.
Where do you plug in the connector to turn the fans on?
I hope you can help me. I just built my pc with this case and I'm planning to get my first gpu, but the one I'm getting is about 301 mm. From the website it says 305mm is the max vga size it can fit. Do you think i won't have issues putting the gpu inside the case and will be ok for the airflow or should i go with a shorter gpu? (I'm getting the asus tuf gaming 3060 ti)
It should be fine but when the numbers are that close I’m not sure it’ll fit.
@@finnwydd I figured as much, thank you. I decided to get a much smaller gpu, it has about 2 inches gap lol
does anyone know where i plug in the fans i can’t see a spot on my mother board for it
Can 240 Aio fit in montech x1 case and my motherboard is asrock A520m-HDV
man I love your videos even if I don't care about the product itself
Somethings could be better love the looks. I watch you reviews get to see more different content on your channel please keep it up. Thank You
Will do!💯
I just got this case for $60, was it a good deal?
I got an almost identical looking case made by a danish manufacturer, that ships with 6 FRGB fans, but it still costs only €47. This Montech case is totally overpriced, if you ask me. Im glad I got the cheaper and better alternative instead.
Thanks for listening to my request, I have the black version and I don’t know how I feel about the fans, I really wish they were software controlled so I could have them off when they I’m not under load. I also with I could change the rgb since it’s ugly so I always have it off since it’s non-addressable. I’ll probably pickup new fans but I wish they showed it on the website.
If anything get Razor Chroma I reviewed it, it's 💯
@@KosherTech thanks for the suggestion!
Anytime let me know whatcha get. Also feel free to swing by our discord server discord.gg/f5g7NA4
Hmm Im super conflicted on that honeycomb cage in the front
I plan to get this one because in my location it's only $44. Budget is very limited so it's good that I dont need to spend more for case fans.
Can these fans be connected to a controller?
Sometimes its just worth it to get your own fans. I got the metallicgear neoqube (phantek's version of Lian li 011) and got those ezdiy white argb pwm fans to put in it. Good airflow, good looking and looks hella expensive even though I paid like half the price of what it looks like
I need a pc because my ps4 is broken and stoped working so now I have nothing to play on, no pc, no laptop, and no console and I don’t have enough money to buy one
I just got the x3 and its only 35dollars on my country
Can you change the rgb of the fan how?
How to open the front side?
I want this case because its white and mesh front. Also saving ANY money would be great because children are expensive 🤣🤷🏻♂️
Can i remove the mesh in the front
Want to do white build for my kid
9:56 can I fit a 2x 140 up here??
U might be able to
Can You make me a pc. You have a lot of parts.
Да как эту переднию часть со стеклом снять, там где 3 куллера спереди. Пиздец, ну хоть один бы обзорщик показал как её снять. Нет надо вырезать.
Rare disagree Kosh. So $70, agree $50 for the case, so for $20, broke ass youngin gettin three 140s and three 120s with rgb. Good broke youngin value IMO brah brah.
Lol fair point Jeff
Dude talk like a person please