Beware, once pump shutsoff the basket float back up because it has no weight to it and next time pump starts basket just keeps floating and debris just goes below basket, some of my customer bought this and i always have to put weight on the basket, they do work awsome but most of the times basket float ups after pump shuts down
This is NOT the Bernoulli effect. It's merely increasing fluid velocity through a smaller aperture. The Bernoulli effect is a reduction in pressure in an *enclosed* moving fluid when its velocity increases. Here, the water is open to the air and at atmospheric pressure. As a ChemE I've taken enough fluid dynamics courses (graduate and undergrad) to recognize this.
BUYER BEWARE! They only give you a 15 day return policy and the design requires a MUCH HIGHER WATER LEVEL in your pool. You must constantly monitor your water level and not let it drop below top of skim-a-round
You said it pops up when the pump turn off. Does that mean you gotta take it out and dump it every single time? I usually just clean mine out every few days. I dont wanna be dumping that thing everyday. Im lazy like that.
Thanks for the video. Also to let you know there's a plastic basket hook that will pull your basket out and you don't have to reach in or even turn off pump to get it.
Nice review. I just got mine yesterday. After I removed the Weir flap it works great. When you remove the Weir flap it really increases the velocity. ( Weir flap that's the flapper door on your skimmer)
@@sportsbros1232 Yes I still like the Skim-A-Round basket skimmer. Depending on the water level of the pool I do have to adjust the collar that adjusts the height periodically. I also use the snap in reducer. During the winter when the pool is not being used much and when I go away I use the floating Skim-A-Round. That model is even more effective.
What site did you buy it from? The actual skim a round site shows that the bucket only has one section to put the ring not like yours that shows min and max flow.
You get it direct from the Skim-A-Round website. 1. A basket in two parts. 2. Velocity Ring in 3 sizes 3. A low flow accelerator disc (like a reducer ring you place inside) Watch the setup video also under Customer Service | FAQ REF: Troubleshooting Guide www.skim-a-round.com/pages/tech-support_ Manuals www.skim-a-round.com/pages/helphq#/collection/196/article/675
Same water going through a smaller hole.... of course its going to suck harder. Youre just taxing your pump is all your doing. Using more power too. Enjoy the higher power bill and higher maint cost when your buying pump motors. Your pump and plumbing can only draw so much water. Its physics.... i bet it would suck harder with an even smaller hole.
Billy in 4C It is common sense! The smaller the intake the harder it is for the large skimmer hole works harder to get the same volume of water, hence it becomes a vortex. Why does a smaller 1/2” hose seems to have much higher pressure that a large 1”. Hose?? Anything coming from a large flow in to a smaller outlet will create this. Anyway, it a deception.. Nonsense.. It makes your pool pump motor work harder.
Around pre-2019, a lot of people had problems with the skimmer basket fitting. It did not have the 3 adjustable rings. They updated the model around late 2019 to make the rings adjustable. Also, read the FAQ carefully.
Tony B haha! I just basically said the same thing before I read your post. Smaller hole, same volume. Why do these idiots think the skimmer is suppose to work that way? Suction and volume is dictated by pump and plumbing size. Duh!
Actually, I had good results with the device. The problem is that most people do not know how to adjust the suction of the skimmer at the pump. They think they can just drop it in and see instant results. You have to adjust the suction and make sure the water level is not too high (or too low). The average person doesn't know how to clean their pools. It works but you have to have experience cleaning pools.
Mr H ive got two Aquagenie skimmers. Best Ive ever seen. Have had 6 different homes with pools and they are far better at cleaning. I built my pool at this house. Its stays soooo clean
If you have the weir walls (flappers) in your skimmer, you do not need these. They are just another version of a skimmer weir wall. They are a pain to clean out. They are just a Facebook marketing product that most people do not need.
Just ordered one good vid for 35 how can you beat it. I see a competitor of the product has a long winded complaint which makes no difference. 75 maybe but 35 you cannot go wrong it looks like it does the job
Then you need to raise your water level when this fraud of a product is installed. Instead, drop your water level a couple inches when using the original skimmer basket and you will get the same results seen here.
Ray Williams ya no basket is just an open pipe. Problem is that you need a basket or your pump basket will clog up. Traditional slimmer baskets limit the flow which is what this product is attempting to solve.
Beware, once pump shutsoff the basket float back up because it has no weight to it and next time pump starts basket just keeps floating and debris just goes below basket, some of my customer bought this and i always have to put weight on the basket, they do work awsome but most of the times basket float ups after pump shuts down
Great job Brandon, you helped me make my decision! Your clear, concise explanation was much appreciated.
This is NOT the Bernoulli effect. It's merely increasing fluid velocity through a smaller aperture. The Bernoulli effect is a reduction in pressure in an *enclosed* moving fluid when its velocity increases. Here, the water is open to the air and at atmospheric pressure. As a ChemE I've taken enough fluid dynamics courses (graduate and undergrad) to recognize this.
Ahhhhhh, the ol' Bertolio effect. ;-)
😂😂
Great review. Found it on Facebook too but looked like a gimmick. Appreciate your time posting this for everyone. 👍🏼
BUYER BEWARE! They only give you a 15 day return policy and the design requires a MUCH HIGHER WATER LEVEL in your pool. You must constantly monitor your water level and not let it drop below top of skim-a-round
You said it pops up when the pump turn off. Does that mean you gotta take it out and dump it every single time? I usually just clean mine out every few days. I dont wanna be dumping that thing everyday. Im lazy like that.
No, when the pump comes back on the next time, it sucks it back down. I clean mine once a week.
I just ordered because of your review. Thank you!
Whatever.
Good video, “or whatever”
Thanks for the video. Also to let you know there's a plastic basket hook that will pull your basket out and you don't have to reach in or even turn off pump to get it.
I'll give another👍 I just got mine and what a difference of flow great review and great info on how to set the ring
Hey brother! Are you happy with this product? How long have you had it for?
Best review I’ve seen on this, thanks to you and your son 👍👍
Nice video. I've been using one for a couple years now. Was thinking about trying something different but your video made me re-order 2. Thank you!
Thanks for the review you convinced me. I'm getting one
Thanks. Good video.
Just seen this on Facebook too, and needed something to capture all the bugs in rainy season that seem to layer my pool.
Thank you so much for making this video. I was on the fence but your video really helped.
Nice review. I just got mine yesterday. After I removed the Weir flap it works great. When you remove the Weir flap it really increases the velocity. ( Weir flap that's the flapper door on your skimmer)
Steve do you have to remove it or is that optional?
@@kathyo9420 it's optional. But I found it work much better once I removed the weird flap.
Steve what is your 1 year review on the skim-around? Do you Still like it?
@@sportsbros1232 Yes I still like the Skim-A-Round basket skimmer. Depending on the water level of the pool I do have to adjust the collar that adjusts the height periodically. I also use the snap in reducer.
During the winter when the pool is not being used much and when I go away I use the floating Skim-A-Round. That model is even more effective.
I'm curious why this device is needed if you have a weir? The velocity may change with the skim around but the rate of water isn't
Thanks for sharing - I will look for it locally and take a gander.
What site did you buy it from? The actual skim a round site shows that the bucket only has one section to put the ring not like yours that shows min and max flow.
You get it direct from the Skim-A-Round website.
1. A basket in two parts.
2. Velocity Ring in 3 sizes
3. A low flow accelerator disc (like a reducer ring you place inside)
Watch the setup video also under Customer Service | FAQ
REF:
Troubleshooting Guide
www.skim-a-round.com/pages/tech-support_
Manuals
www.skim-a-round.com/pages/helphq#/collection/196/article/675
I've been looking ar this thing for over a year. Thanks for the honest opinion on it.
Kathy O you’ve been looking at a pool basket for over a year?
Hope you like air in your filter
My skimmer does the same thing with my door flap... I want to try the floating in pool skimmer
Excellent review and video, thank you! I think I'll buy one and give it a shot. Thumbs Up
How do you vacuum with this skimmer? Im so confused please help!!
I just got mine today. I hope I'm in that 1% also lol. Least it wasnt a pricey item. Worth a shot in my opinion for the cost.
Just installed mine today. But make sure you get rid of the flap in front of the skimmer or it won’t work.
Pacs Life how do you do that ?
Skeptical over a product with no negative comments.
Same water going through a smaller hole.... of course its going to suck harder. Youre just taxing your pump is all your doing. Using more power too. Enjoy the higher power bill and higher maint cost when your buying pump motors. Your pump and plumbing can only draw so much water. Its physics.... i bet it would suck harder with an even smaller hole.
Thanks for showing this, why do you think there are so many bad reviews of it ?
What’s the return policy on it ?
Billy in 4C It is common sense! The smaller the intake the harder it is for the large skimmer hole works harder to get the same volume of water, hence it becomes a vortex. Why does a smaller 1/2” hose seems to have much higher pressure that a large 1”. Hose?? Anything coming from a large flow in to a smaller outlet will create this. Anyway, it a deception.. Nonsense.. It makes your pool pump motor work harder.
Around pre-2019, a lot of people had problems with the skimmer basket fitting. It did not have the 3 adjustable rings. They updated the model around late 2019 to make the rings adjustable. Also, read the FAQ carefully.
Tony B haha! I just basically said the same thing before I read your post. Smaller hole, same volume. Why do these idiots think the skimmer is suppose to work that way? Suction and volume is dictated by pump and plumbing size. Duh!
Actually, I had good results with the device. The problem is that most people do not know how to adjust the suction of the skimmer at the pump. They think they can just drop it in and see instant results. You have to adjust the suction and make sure the water level is not too high (or too low). The average person doesn't know how to clean their pools. It works but you have to have experience cleaning pools.
Mr H ive got two Aquagenie skimmers. Best Ive ever seen. Have had 6 different homes with pools and they are far better at cleaning. I built my pool at this house. Its stays soooo clean
so sweet to share this.....thank you!
Thanks for your review.
Thanks for posting! Waiting on mine now.
If you have the weir walls (flappers) in your skimmer, you do not need these. They are just another version of a skimmer weir wall. They are a pain to clean out. They are just a Facebook marketing product that most people do not need.
Just ordered one good vid for 35 how can you beat it. I see a competitor of the product has a long winded complaint which makes no difference. 75 maybe but 35 you cannot go wrong it looks like it does the job
You probably won't receive it. DO NOT BUY!
Great video! I am sold!
Thanks. Convinced me to purchase.
Mine didn't work...smh
Thanks.
We are getting one!
Great video. It really helped me! 👍
Great Video, but mine never worked at all
Just ordered one, seems like it works awesome.
Good stuff!!! Thank you for the video
Thank you for the review buddy
My regular basket does the same by shutting down the deep end drain 😂
I had problems sucking air into the pump motor because this thing created to much suction
Then you need to raise your water level when this fraud of a product is installed. Instead, drop your water level a couple inches when using the original skimmer basket and you will get the same results seen here.
Great job!
thank you I got it all to gather about to use it
At beghining of vid it had exact same cyclone with no basket..fail
Ray Williams ya no basket is just an open pipe. Problem is that you need a basket or your pump basket will clog up. Traditional slimmer baskets limit the flow which is what this product is attempting to solve.
1:10 if you like it than you better put a ring on it
Amazing!
Thank you. Grest review
Thank you!
One can achieve the exact same results by lowering the water level in their pool by a couple inches. Try it. It is what I do when necessary.
Well done 👍🏻
scam around
LOL. no kidding!!!
Skim Around is a scam. Don't waste your money!! False advertising!
Got one... junk
Or Whatevaa !!!
...”or whatever”...
Product is garbage for my pool. Crappy customer service.
whatever 😷