Save a lot of time and money drilling the steel barrels holes by just paying a metal fabrication shop to do it for you. Charged me $50 to drill holes for everything seen in this video
8:40 Hey man, I feel really lucky to have found your video. I've recently just opened up shop and have been selling corn grain spawn bags. I'm still getting rye figured out though. Last night my bags came out really good lucking, much like yours. Tonight I let the pot boil too long and got a good amount of split grains. I was planning on just keeping the split grain batch for myself and holding onto the nice looking ones for sale. You' helped me confirm that I was making the right decision. Thanks!
Awesome stuff, I love your cultures gonna oder a 5 pack soon! I have a question, I was always told to autoclave spawn but I assume from this video you can stem sterilize them for a little over 10 hours a that will be effective sterilization. strategy.
You can, the time will depend on several factors, but you should probe the middle of the center most bag. 8 hours after the bag reaches temp, it is good to go.
Do you seal the bags prior to sterilization or seal after?looks like they are sealed before hand. Thanks for the video filled in alot of gaps!keep on mushing
This is sterilizing under 2 atmospheres of pressure. After, all bags are left in room temp for 10 days to ensure sterility. We have done 65,000 bags in the past two years with a 99.9% success ratio.
@@liquidfungi yea for sure i figured it was under 2 atmospheres, that would be 30 PSI dont think your tanks can handle that. The leaving them out part i love and will for sure incorporate that as a control measure. Thanks for info.
Old street signs work great(stops are the easiest to use)drill 50/75 holes in the sign and sand blast)I used threaded rod through the sign to set my bottom tray height
@@joshflanders9535 you got it. If you are doing small scale you can make oat cakes that the mushroom can grow on in jars or bags. You can look up how to make brown rice flour cakes too - PF tek. Mushrooms grow on lots of stuff if you make it easy for them. Good luck and have fun!
Just built one with controler and everything for 400$ give or take 100 for any extras(voltage meter/20 amp in line breakers/6 foot temp sensor wire) also used a old juice shipment barrel made of just regular steel.when you get into stainless your easily talking double or triple that number.I would Def recommend building one of these
Save a lot of time and money drilling the steel barrels holes by just paying a metal fabrication shop to do it for you. Charged me $50 to drill holes for everything seen in this video
It is such a clean setup. Very methodical
8:40 Hey man, I feel really lucky to have found your video. I've recently just opened up shop and have been selling corn grain spawn bags. I'm still getting rye figured out though. Last night my bags came out really good lucking, much like yours. Tonight I let the pot boil too long and got a good amount of split grains. I was planning on just keeping the split grain batch for myself and holding onto the nice looking ones for sale. You' helped me confirm that I was making the right decision. Thanks!
How long would you recommend running coco under atmospheric sterilization. Thank you, your videos are awesome.
What is your contamination rate using an atmospheric sterilizer vs an autoclave or pressure cooker?
99.9% success rate, we did 48,000 blocks this year.
@@liquidfungi how long do you run those for?
Wow!! That’s amazing! How many hours of labor did 48000 blocks cost you?!
Awesome stuff, I love your cultures gonna oder a 5 pack soon! I have a question, I was always told to autoclave spawn but I assume from this video you can stem sterilize them for a little over 10 hours a that will be effective sterilization. strategy.
You can, the time will depend on several factors, but you should probe the middle of the center most bag. 8 hours after the bag reaches temp, it is good to go.
@@liquidfungi Do you mean sacrifice one bag or stick the probe between two bags? Doing my first build for spawn. Thanks.
Do you seal the bags prior to sterilization or seal after?looks like they are sealed before hand. Thanks for the video filled in alot of gaps!keep on mushing
is this sterilizing the substrate or pastuerizing it? Have you done control bags to see if they grow contamination if not inoculated?
This is sterilizing under 2 atmospheres of pressure. After, all bags are left in room temp for 10 days to ensure sterility. We have done 65,000 bags in the past two years with a 99.9% success ratio.
@@liquidfungi yea for sure i figured it was under 2 atmospheres, that would be 30 PSI dont think your tanks can handle that. The leaving them out part i love and will for sure incorporate that as a control measure. Thanks for info.
Where do you buy the controller boxes I see that you got 2 on the wall?
They were bought at Auber Instruments - www.auberins.com/
If you are interested in buying a PID controller, Sporenity sells them
Great Video - Thanks much!
I barfed up my dinner from that camera swinging around like a go-pro on a whirligig
nice video .
where do you get the perforated trays from?
www.webstaurantstore.com/american-metalcraft-car21sphc-21-super-perforated-hard-coat-anodized-aluminum-car-pizza-pan/124CAR21HCSP.html
Old street signs work great(stops are the easiest to use)drill 50/75 holes in the sign and sand blast)I used threaded rod through the sign to set my bottom tray height
Would it work for popcorn
Yes, this will work with all grain just might need to vary the time
@@liquidfungi how long would you suggest ? Just curious thank you for the reply !!
Do you think oats would be similar times to rye berries
You can but Oats will turn to mush. Stick with firm grains like rye, corn, wild bird seed.
@tvviewer4500 thank you for your reply
@@joshflanders9535 you got it. If you are doing small scale you can make oat cakes that the mushroom can grow on in jars or bags. You can look up how to make brown rice flour cakes too - PF tek. Mushrooms grow on lots of stuff if you make it easy for them. Good luck and have fun!
What do you think it cost to build a barrel?
Just built one with controler and everything for 400$ give or take 100 for any extras(voltage meter/20 amp in line breakers/6 foot temp sensor wire) also used a old juice shipment barrel made of just regular steel.when you get into stainless your easily talking double or triple that number.I would Def recommend building one of these
How long to sterile the subtrate
Watch at 5 mins to 6
Yeah bro where's the link?
www.webstaurantstore.com/american-metalcraft-car21sphc-21-super-perforated-hard-coat-anodized-aluminum-car-pizza-pan/124CAR21HCSP.html
@@liquidfungi Thank you much.
Street signs work great as dividers(local dpw will have PILES of these laying around)sand blast and done way cheaper than 40$ each