The bottom line is what 592 serial number represents the final fixes (fuel line, dog mounts strengthened, intake gasket improved, etc.) of known problems of first released saws are implemented?
Way to save a Husky Donny. That de comp blowing out is a new one. I really like the 592. Fast and smooth. New coach for Vancouver tonight. Guess we’ll see again
Donny: I was considering purchasing the 592XP until I watched your video. Would you think that the 395XP which is not an auto tune saw would be a better choice?
Hi Donny Been Watching your Video's and They Are Excellent I have a question for you Bought a 592XP In August 2022 It has Always Been Hard Since New Starting Cold or Hot Checked The Fuel lines And Fuel Filter They Seem to be ok And the Spark Pug Looks Ok As well asked the dealer for a Firmware update He said it would cost $100.00 i guess thats an hourly rate figured it would be Free since Its an update and i bought it new from them Is that a Valid Charge for the Firmware update the dealer does seem to be interested in doing it at all also the saw seems to be not running as well as it should i use it for Firewood cutting up 30" rounds into quarters then split them also the top cover has a crack from being out in the cold weather it is in the rear and goes through the Orange plastic into the Black Plastic seems very odd for me Can you help me out? Or give me a Phone number to call Husqvarna Customer Service I live in New England Thanks Stan
Hey donny have u ever herd of the 592xp not fully returning to idle my new one will run fine till it warms up then cut a tree sticks 1/4 throttle but the cable isn't getting stuck everything works smoth..the only way to stop it is apply chain brake or even touch the chain to a block of wood.
Would love to know whats up with my 592. Only run for 1.5hrs according to the computer, guy said theres no codes. But it'll start then idle for 20 seconds then turn off. I took the carb apart once and it would idle for ever after but very rich (smokey but same fuel I run in my other autotune saws). Yesterday I read a fuel pipe to the bulb can kink and lo and behold it was kinked, sorted that out by shortening the pipe slightly, and it then ran perfect, cut great idled great I was ecstatic. Tried it an hour or two later and its gone back to idleing for only 20 seconds!
The bottom line is what 592 serial number represents the final fixes (fuel line, dog mounts strengthened, intake gasket improved, etc.) of known problems of first released saws are implemented?
I love hearing tips and insights from a true professional!
Thanks, Donny!👍
Donny another interesting show very informative 👍 thanks for sharing
Johno Alice Springs Australia 🇦🇺
Great tips have a good week sir.
Way to save a Husky Donny. That de comp blowing out is a new one. I really like the 592. Fast and smooth.
New coach for Vancouver tonight. Guess we’ll see again
Hey bud thanks ya new coach lets see how this one does Are the seahawks in the playoffs
No Seahawks were eliminated by the 49ers a couple weeks back.
Pulling for the Chiefs to win the Super Bowl.
They won last night bud canuckel heads
@@donnywalker4691 oil mix 33:1 is ok ?
What up, Don! Been a minute, thanks for the video
Have seen the top cover rub also
Compressor cracked me up 🤣🤣🙄🔫
I had a decomp strip out as well went to change a leaking one
Donny:
I was considering purchasing the 592XP until I watched your video. Would you think that the 395XP which is not an auto tune saw would be a better choice?
what year and serial no to expect a change in the intake ?
Hi Donny any update from Husqvarna on 592 intake boot issues? enjoy the channel Brian Rep of Ireland.
Hi Donny
Been Watching your Video's and They Are Excellent I have a question for you
Bought a 592XP In August 2022 It has Always Been Hard Since New Starting Cold or Hot
Checked The Fuel lines And Fuel Filter They Seem to be ok And the Spark Pug Looks Ok As well
asked the dealer for a Firmware update He said it would cost $100.00 i guess thats an hourly rate
figured it would be Free since Its an update and i bought it new from them Is that a Valid Charge
for the Firmware update the dealer does seem to be interested in doing it at all also the saw
seems to be not running as well as it should i use it for Firewood cutting up 30" rounds into quarters
then split them also the top cover has a crack from being out in the cold weather it is in the rear
and goes through the Orange plastic into the Black Plastic seems very odd for me
Can you help me out? Or give me a Phone number to call Husqvarna Customer Service
I live in New England
Thanks Stan
Quick question, if you lost autotune due to destroyed wiring or you just take take it out, how would the saw run if not at all?
Hey donny have u ever herd of the 592xp not fully returning to idle my new one will run fine till it warms up then cut a tree sticks 1/4 throttle but the cable isn't getting stuck everything works smoth..the only way to stop it is apply chain brake or even touch the chain to a block of wood.
Your carb intake probably ripped sucking air
My 572 had the same thing happen with the decomp.
Would love to know whats up with my 592. Only run for 1.5hrs according to the computer, guy said theres no codes. But it'll start then idle for 20 seconds then turn off. I took the carb apart once and it would idle for ever after but very rich (smokey but same fuel I run in my other autotune saws). Yesterday I read a fuel pipe to the bulb can kink and lo and behold it was kinked, sorted that out by shortening the pipe slightly, and it then ran perfect, cut great idled great I was ecstatic. Tried it an hour or two later and its gone back to idleing for only 20 seconds!
is it possible to convert 952 auto tune to manual carb?
do you think it will be able to stand up of 20 years of intermittent use like 395 ?
Hey Donny, over here in Quebec 91 octane now has 10% ethanol. Would you suggest 91 or regular is fine for small engines ?
You should use 91 or better in the new saws but older ones and regular small engines you can use less octane dam ethanol out there eh
How many hours on this saw? It's always interesting to know.
I will download and find out
I have a problem with my bar constantly getting clogged on my 592
What kind of bar
@@donnywalker4691 husqvarna x tough light 32 inch
@@donnywalker4691 I'm about to either try a different chain or different bar
I had another person say that about those bars drill it out one size bigger
@Donny Walker the hole is large already well bigger than the husqvarna stock bars. I'll get the Dremel out
Mine has been nothing but crap since I bought it.
Thank s Donny . Sounds like there making junk. A
Auto tune is junk!!!!!
Stihl all the way!