Hey Donny. Good to see Husqvarna getting the updated parts out quick. Still waiting to see the 592 inner dog mount fix. Hopefully soon. Johnny sent that same hat up to me . Super comfortable and one of my favourites in the rotation
Hi Donny, Have you been seeing any issues with the 592 anti-vibe mounts breaking? We have seen quite a few of them with low hours running 24" bars breaking the mount above the fuel cap. Also still seeing broke/torn intake boots. The mounts are on backorder :( I just had a 372xp x-torque on my bench that was loosing power in the cut, to the point of shutting off, when one pulled it out of the cut it was running lean. Pressure tested fine. Fuel filter looked like brand new, the air filter, and spark plug were just replaced by the dealer. I put a new fuel filter in it any ways and that fixed the saw. Looks can be deceiving with fuel filters. One cannot stress enough doing regular maintenance especially on the current generation of saws with solenoids and injectors.
Ya your saw or car not going to run good with a crappy spark plug don’t no why folk don’t don’t do the maintenance on there saw the saw should me much happier running .and the hose on a Husqvarna they should’ have been smart on when they maid the saw every body in a hurry to put a product out without checking it out first
Howdy, Mr. Walker...I see you are still preaching to the choir. You can lead a horse to water, but you can't make them drink! It will always be the same ones that you will always start any saw service with a power washer! 🙄
Installed the new WCS dogs on my 550xp mk2 last week they work great. I think I used 13/64 drill bit. Thanks Donny 👍🏼
Awesome mod to make that saw even better! Something to dress up the ugly side cover!
Hey Donny. Good to see Husqvarna getting the updated parts out quick. Still waiting to see the 592 inner dog mount fix. Hopefully soon. Johnny sent that same hat up to me . Super comfortable and one of my favourites in the rotation
Yes - I agree. my 592 has the same issue.
snow here in nh tomorrow! maybe if i can get my old shop warm enough i can start my 2163 to 2177 conversion!
Good info, thanks Donny.
Donny, I'm starting to fill up note books with all of your tech tips! Much appreciated!👍💪
Simple Maintenance goes a long ways!
Love all the tips and tricks keep it up
Delete the dang purge bulb!!!!! Problem with kinked line solved! I use a husqvarna 372 tank vent to replicate the one way valve in the line
Thank you Donny.
Hi Donny, Have you been seeing any issues with the 592 anti-vibe mounts breaking? We have seen quite a few of them with low hours running 24" bars breaking the mount above the fuel cap. Also still seeing broke/torn intake boots. The mounts are on backorder :( I just had a 372xp x-torque on my bench that was loosing power in the cut, to the point of shutting off, when one pulled it out of the cut it was running lean. Pressure tested fine. Fuel filter looked like brand new, the air filter, and spark plug were just replaced by the dealer. I put a new fuel filter in it any ways and that fixed the saw. Looks can be deceiving with fuel filters. One cannot stress enough doing regular maintenance especially on the current generation of saws with solenoids and injectors.
Ya your saw or car not going to run good with a crappy spark plug don’t no why folk don’t don’t do the maintenance on there saw the saw should me much happier running .and the hose on a Husqvarna they should’ have been smart on when they maid the saw every body in a hurry to put a product out without checking it out first
1 Moore thing we have been slammed with snow and high winds
Thanx Donny!!!
Gotta maintain your tools and equipment:)
Hold your hand behind the sparkplug or anytime you hold something close to camera so it will focus so we can see it much better please Mr walker
Where can I find Part Numbers for parts for the 592XP?
Howdy, Mr. Walker...I see you are still preaching to the choir. You can lead a horse to water, but you can't make them drink! It will always be the same ones that you will always start any saw service with a power washer! 🙄
Keep telling us maintenance. I'm older and lazy too. Getting older makes for excuses. I'll get to it later. On the other hand I'm a 38 year trucker.