DIY Carbon Fiber skinning Mirror Caps for Mercedes GLE 63 AMG, how it’s made production
Вставка
- Опубліковано 18 чер 2023
- Carbon Fiber skinning mirror caps diy how its make production
DIY Carbon Fiber skinning Mirror Caps for Mercedes GLE 63 AMG , how it's make/made step by step, shows how to Carbon skinning different parts, if you like the video, give a thumb up and subscribe the Chanel for more videos, and check the other videos. If you have questions or ideas what we can skinning with real Carbon in the next video, write in the comments 👍🏼 Thanks!
▬Recommended Equipment ▬▬▬▬▬▬▬▬▬▬
▬ More Videos ▬▬▬▬▬▬▬▬▬▬▬▬
Carbon Fiber other Projekt, Carbon fiber
steering wheel how its make in this video : m.youtube.com/watch?v=25PmqM2... m.youtube.com/watch?v=GpZoNKo...
▬▬▬▬▬▬▬▬▬▬▬▬
#carbon Fiber
#how its made
#epoxy resin
#diy
#how to make
#hydraulic press#how to fix#Restoration
#satisfying videos
#restoration videos
#restore
#restoring
#rust
#making of
#Asmr
#best products
![How to Simply Change your Car Parts to Real Carbon Fiber (Carbon fiber Skinning) [DIY]](/img/n.gif)
Hi, new subscriber 👍🏻 doing a few projects on my own car. You do an Incredible job! What do you do to the carbon material before hand. You are pulling it about and it's not distorting at all. This is the part I'm struggling with the most. Any help would be really appreciated 😊
Damn bro this looks so so muvh better than vinyl or fake carbon fiber
Is the part at 0:29 made out of plastic? I'm new to the carbon thing and i'd like to ask. Are carbon fiber mirrors only made out of carbon wrapped around plastic ( or whatever the material of the part at 0:29 is) orthey can be made as well completely from carbon fiber layers put together?
👌🏻look always zo easy just like the steeringwheels. Or not the good fabrics of Carbon (200gr/m) or to heavy sandingpaper… thx for your video’s🙏
😄yes i know. After thousands of parts it will be easy automatically. At the beginning it’s normal that it is not easy. Make test with 240gr/m, this is little bit better
@@CARBONART. thx for your advies. I really appreciated
What type of clear coat do you use and also what kind of adhesive you use to adhere the carbon fiber cloth to the product?
NAME OF THE spray adhesive !
Ustam merhaba amatör olarak bende uğraşıyorum birinci katı epoksiyi attıktan sonra epokside beyaz lekeler oluyor acaba epoksi ile alakalı
Did you spray adhesive on the carbon for it to stick like that ? Loving the videos , very helpful 👍
Hello, yes we spray it on the Carbon and the parts too 👍🏻
@@CARBONART. What did you spray 3M 777?
I wish to know
Nice video mate.. can u tell us whats the glue that u use?
Hi, thank you. We use a 2 component high temperature resistant glue
Amazing job! May I ask what number of grits did you use?
Hi,
Step 1: 80/100
Step 2: 240
Step 3 : 600 wet
After it we spray clearcoat
Thanks mate!
can we use more coats of resin and skip clear coat to get enough shine?
Hi, we take 3-4 layers of resin, after sanding comes the clearcoat
What carbon weave are you using?
Hi, 240 gr m2, the standard one
Hi, what kind of carbon fiber did you use?
Hi, this is
Standard 240g m^2
No vacuum bagging? no oven? How does this work? Is the bond strong enough?
Hello, right our process don’t need a vacuum bag. We use a oven, it is important. We put in in the oven for around 12 hours between 30-80 degree.
Diy"
What the adhesive material
What's the paper grits?
What's the epoxy overlay timing
How it's diy ?!?!
Hi, we use epoxy resin,
Paper grits:
1 step 80-100
2 step 240
3 step 600 wet
Epoxy overlaying 30-45 min 3-4 layers.
Hi, can you please write clearly the name (designation) of used carbon material, which contains the epoxy resin? As I understand, it is not a normal carbon fiber, because it is with resin. Can you please write the name of used carbon fiber and maybe where I can buy it? It would be very kind from you.
Carbon fiber with epoxy already infused is called prepreg (pre impregnated) carbon fiber, and I’m assuming that’s what he used
Thanks a lot at least you gave me an answer. I appreciate it.