AXIAL SCX6 RTR: DIFFERENTIAL SHIM INSTALL
Вставка
- Опубліковано 8 вер 2024
- PRONOOBRC back on the bench! In this video we take one of our new awesome AXIAL SCX6 Jeeps, and remove some of the diff slop. All it takes is a couple shims and your all set!! We hope you enjoy, and stay tuned for more great RC builds!
#axial #axialracing #axialscx6
#axialrc #scx6 #rc4wd
#scale #scalemodels #scalecrawler #scaletruck
#scalebuildersguild #scalerc #scalerctruck #scalerccrawler
#scalerc4x4 #hotracing #mods #upgrades #rcbuild
Part Number:
WASHER 12X15.5X0.2MM (4 PCS)
#AR709052
EliminatorRC: (eliminator-rc....)
When shopping online at Eliminator-rc.com use Coupon Code "pronoobrc" at checkout, to receive $15 off any order of $100 or more (some exclusions)!!
Thanks for stopping by!!
Music by Epidemic Sound (www.epidemicsou...)
Follow us:
Twitter: @NoobRc
Instagram: @pronoobrc
UA-cam: / pronoobrc
Cool tune, excellent work bro!)🥰🤩💥💯👍👏
Cheers!
I was just doing work on my new SCX6 and found the ring had a wobble to it when turned that would cause it to be too loose at one point and way too tight 180 degrees around on the opposite side. I thought maybe it was faulty or bent somehow. Couldn't see how it could bend though. I ordered a new ring and pinion set and installed it. The wobble was even worse. It took a bit of cursing and investigating and what I finally found is that with no screws in the ring gear it would not sit flat on the inner "carrier". No matter what position I put the ring gear on the inner part it would rock side to side as I pushed down on it with my fingers. I checked the carrier and it spun and ran true so it was not the hub part. Where the fault was on both the original ring gear and the new ring gear was the inner diameter was a sharp 90 degree edge and this was hanging up on the inner surface of the carrier part. I used a 3/4" grinding tip for a drill (similar to a Dremel 941 grinding tip but larger) to chamfer the inner diameter of the hole in the ring gear where it seats on the hub. It didn't take much, such a small amount that it is hard to see the chamfer. Now it seats flat onto the hub and spins true in the differential with no wobble. As it turns out I didn't need a new ring and pinion I just needed to fix the problem. Now it is back in and shimmed with no play and no binding. Just a heads up for others that may run into this issue.
One day soon I will pick up mine.😎 at least you saved me finding it out my self 🙏 awesome my friend.
You will love it!
Great video guys the scx6 is a beast... Can't wait to see who wins that sweet giveaway truck..👍💯👊
We got over 12,000 views on the giveaway video short and 400 new subscribers I was really hoping to get this thing out the door by New Year’s this year but it looks like it will probably take until next Christmas lol
@@ProNoobRC you will get there soon you guys make awesome content it's only a matter of time now.👍💯
just got me a SCX6, the only thing i dont like is that the diffs are all locked, i wish the front was at least open diff or manual diff. not all fully locked
Yes!! We are hoping Traxxas gets into this game and drops on with locking diffs!
I have to agree, would love to see one with selectable lockers.
Can’t wait to see who that lucky winner is
Me too! Then we can start the next giveaway build!
Wishing you guys the very best for 2022
Cheers 👍
Thanks Mick! Same to you and your family!
Just drove mine for the first time today. The front is clicking from time to time. Hopefully I'll be able to just shim it.
Check axle pins at u joints too. The pins can move and start hitting the screw end.
Informative video, thank you. 👍✌️
Cheers!
Going to have to do this to mine, thanks for the great video!!
Cheers! Glad we could help with the proper info
Nice info brother 👍 il check mine wen I get it in 2 days time. Awesome video buddy an give away 😀 🇬🇧 👍
Cheers!! You’re gonna love that scx6!! I can’t wait to drive mine again after the snow melts!
Is that the same oil or grease in the transmission I'm trying to regrease my transmission but all I have is dynamite marine grease can I use that or do I need special oil or grease for the scx6 transmission????
No use grease it’s far better than the goop they use
@ProNoobRC SWEEEEEEET!!!
Thank you cause I hate to take it apart again lol thanks mi big bro 🔥 💯 👍👊
@ProNoobRC yeah I had to change out all the bearings in the entire rig cause 50% of them were frozen with rust so I installed the fast eddy bearings kit for the SCX6
Thanks for the how to video. What would cause the front end to shake under full steer? would it be an axle starting to go bad.
That’s just axle hop
@@ProNoobRC it only does it one direction.
Is that one side travelling just a bit more in steering throw? Kinda odd if only one direction yes.
@@ProNoobRC I dont dare hold it wide open in second gear and cutting it all the way to the left. Its not good. Im thinking axle shaft and im yet to take it apart and see. that is the next step before calling horizon.
Is shimming the scx6 jeep going to be the same when shimming the scx6 honcho? Thanks
Yup same rig different body
@@ProNoobRC cool thank you I appreciate it!
Why clean out the factory grease and reassemble with none? That makes no sense...
I think the actual grease getting put in the gears part got chopped out but less than a minute in I explain that we are swapping the silicone oil for Cow RC Udder Butter grease but I understand the confusion our bad! Peace and axle grease! Lol
Metal housings don't do that and is a huge recommendation. Plastic gets warn out and breaks to fast. Witch makes it unreliable in the long run. One roll the right angle and its broken just saying. Just saying not everyone wants to carry it let alone far lol.
Yup! Just installed the Power Hobby axles under it. Plastic no good
Canada…
Eh’men lol
@@ProNoobRC love Canada 🇨🇦 my other half my family is Canadian
In the state of commieforna everything causes cancer lol. Worst state in the country. Best landscapes worst for freedom. But thanks for the video. Have used your tips many times for things. I just got this truck so will probably have to do this.
We seen you got an scx6!! Awesome! Congrats! Love your content!
@@ProNoobRC Thanks. 🍻🍻🍻🍻
I can drive 8+ hours through California and see all of 3 cops, and more than once seen them helping change tires & actually helping people. Drive through Arizona, Texas, or most other red states and there's a cop every other mile with someone pulled over for some petty 2mph over BS. As a trucker, I cover the entire lower 48. I can well above the speed limit in CA and cops pass me like I don't exist. Don't try that in any other state. In AZ the other day, there was 3 young teenage girls trying to change a flat tire, not 100 yards away was an AZ cop harassing a trucker instead of helping the girls. Freedom is more than what your political agenda tells you.
Zuviel Reklames, schade
Cheers!!