VITAVON Axle Housings and Shock Mounts SCX6!!

Поділитися
Вставка
  • Опубліковано 17 лис 2021
  • I just had to cut the top and its SO MUCH BETTER!!! Links below to the SCX 6 along with modded parts and pieces. If you order online please use the links below to place that order, they help out the channel when you do, Thanks!!
    YES!!! Finally got the Vitavon upgrades started!!! Links below for all the Vitavon, use them to help support Exocaged RC, Thanks!!
    Vitavon Upgrades for the SCX6 on Ebay
    Steering Knuckles ebay.us/hijSRc (Silver)
    Steering Knuckles ebay.us/3ci82s (Black)
    Front Axle Housing ebay.us/XhpUyW (Black)
    Front Axle Housing ebay.us/hjIJpd (Silver and Black)
    Front Axle Housing ebay.us/AYzV7b (Silver with Brass)
    Rear Axle Housing ebay.us/1Cb1RI (Silver with Brass)
    Rear Axle Housing ebay.us/rWDINm (Silver and Black)
    Rear Axle Housing ebay.us/8016Vc (Silver--- All Aluminum)
    Chassis Braces ebay.us/DQSGyw (Silver)
    Chassis Braces ebay.us/q5NsTP (Black)
    Motor Mount, Slider Design ebay.us/VZptv5 (Silver)
    Front and Rear Shock Tower Set ebay.us/7TV2NH (Silver)
    Front and Rear Shock Tower Set ebay.us/bfH1yJ (Black)
    Rear Shock Towers ebay.us/ojk1W7 (Silver)
    Center Link Mounts ebay.us/hfEpkS (Silver)
    2.9 Beadlocks ebay.us/CuhZjG (Silver)
    2.9 Beadlocks ebay.us/jyviw8 (Titanium/Black)
    2.9 Beadlocks ebay.us/1CbZ9Y (Black)
    Carbon Battery Trays ebay.us/hX8j1M
    2-speed Servo Mount ebay.us/27Rn0E (Silver)
    2-speed Servo Mount ebay.us/JrFfWl (Black)
    5th Scale Servo Adaptor ebay.us/LmWCv4
    Sliders ebay.us/olJMQw (Silver)
    Sliders ebay.us/gdJCvJ (Black)
    Flysky GT5 Radio
    Amazon amzn.to/3GQOTTE
    Ebay ebay.us/w21V52
    Axial SCX6
    Amain bit.ly/3CHR4q7 (Silver)
    Amain bit.ly/3nPohKg (Green)
    Ebay ebay.us/SA2neM (Silver)
    Ebay ebay.us/ANNc6P (Green)
    Horizon bit.ly/2Y8FfKy (Both colors)
    Shims:
    Amain bit.ly/3D0khg6
    Amazon amzn.to/3o9NDTc
    Ebay ebay.us/WdBY26
    Castle 10a BEC
    Amain bit.ly/3wr0xA2
    Ebay ebay.us/2nW0SH
    Castle BEC 2.0 14A
    Amain bit.ly/3woZG2H
    Amazon amzn.to/3CSgpO9
    Ebay ebay.us/zeuVP1
    Castle WP BEC 2.0 15A
    Amain bit.ly/3o7WuEK
    Amazon amzn.to/3GXBKZ7
    Ebay ebay.us/2Fnkpj
    CHANNEL MEMBER INFO
    If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4, $10, $20, or even $50 depending on your level. Take a look! / @exocagedrc
  • Розваги

КОМЕНТАРІ • 84

  • @mikehagquist5198
    @mikehagquist5198 Рік тому +1

    Slow motion 11 minutes in looks beautiful

  • @Tacklefinlures
    @Tacklefinlures 2 роки тому +13

    I’m guessing this is gonna be another $2,400 crawler soon. 💯

    • @kennethrobinson9008
      @kennethrobinson9008 2 роки тому

      At least. My calculations are over $2500 with the current list.

    • @yiarkungfu
      @yiarkungfu 2 роки тому

      Did you include the Reefs beast 2000?

    • @kennethrobinson9008
      @kennethrobinson9008 2 роки тому

      @@yiarkungfu Nope! Dang... LOL

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      LoL maybe $3k

    • @rcjoe406
      @rcjoe406 2 роки тому

      It's like these companies are working together to squeeze every dime out of us lol

  • @kennethrobinson9008
    @kennethrobinson9008 2 роки тому +4

    RC has entered a new phase! That is an impressive rig.

  • @RuisRcAdventures
    @RuisRcAdventures 2 роки тому +4

    I really love what you've done to the Scc6, taling the top off makes it look so much better. Those Vitavon axles though, wow...! 👌

  • @teamsargentrc6399
    @teamsargentrc6399 2 роки тому +2

    "Beautiful" still waiting on mail for mine! 🤜🤛👍!

  • @heavymetalrc7520
    @heavymetalrc7520 2 роки тому +2

    I would LOVE to have these vitavon upgrades but omg they're expensive. I wish vitavon wasn't so expensive. They would sell soo much more if it didn't cost the price of the vehicle for the upgrades. Definitely some quality stuff though.

  • @DynoRC
    @DynoRC 2 роки тому

    Vitavon madness all over again

  • @yiarkungfu
    @yiarkungfu 2 роки тому +1

    He’s a good salesman.

  • @willb7184
    @willb7184 2 роки тому +1

    Looks good.. I got all the same stuff except them axles !!

  • @gonncalomariamonteiro4176
    @gonncalomariamonteiro4176 2 роки тому

    As this is now built like a TANK...you should call it SCX "SHERMAN"...
    Beautiful work by VITAVON...simply beautiful !
    CHEERS mate.
    Keep it up!

  • @scottdaubenspeck2291
    @scottdaubenspeck2291 2 роки тому

    Awesome video Joe. I had a feeling you'd post weights in your video as I forgot to weigh mine in before assembly. Thanks for the video. Love this channel

  • @montgotoygarage2020
    @montgotoygarage2020 Рік тому

    Nice work buddy! Just ordered mine.

  • @hammerT2997
    @hammerT2997 2 роки тому +2

    Oh shit!!!! Hell yeah man!!! I can't wait to receive mine for the kraton lol. Those look super bad ass man. Gonna have to cave and grab me one of those and them axles, didn't think they'd have aftermarket this soon lol

  • @silverbullet126
    @silverbullet126 2 роки тому

    I've got my axle's on order. I did the shock towers last week. Loving the Vitavon stuff, expensive for sure, but we all knew that going in.

  • @gonzodetroitify
    @gonzodetroitify 2 роки тому +1

    Could not wait to see how you treated this rig🤤💯💯

  • @marshallmotorssc3609
    @marshallmotorssc3609 2 роки тому +1

    Love seeing added weight make a visual difference. Really woke those sidewalks up lol or laid them down I should say.

  • @andrewrichey7374
    @andrewrichey7374 2 роки тому

    Wow those are beautiful, they do have super nice stuff.

  • @mikep.9338
    @mikep.9338 2 роки тому +1

    Oh my 👍🏾👍🏾👍🏾them there nice 👍🏾👍🏾👍🏾

  • @chubn1
    @chubn1 2 роки тому

    You Sir, have a slight Vitavon Addiction.

  • @king-korestudio6311
    @king-korestudio6311 2 роки тому

    That’s one badass Scx6!!!!

  • @danwoodruff4323
    @danwoodruff4323 2 роки тому

    Looking good 👍

  • @andrewrichey7374
    @andrewrichey7374 2 роки тому

    Wow super cool, they look awesome !! They look awesome on there, really like without the top two that really looks cool until next time

  • @LonnieHutchinson90
    @LonnieHutchinson90 2 роки тому

    Damn that thing is awesome!!!

  • @puddleduckist
    @puddleduckist 2 роки тому

    Wow, these are sick! I'm considering buying an scx6 and these would be a priority! Love ur channel, it's costing me money....lmao! Do u have a video of removing the top of the body, it looks so much better that way! Such an awesomely realistic rig!

  • @SwampersRC
    @SwampersRC 2 роки тому +4

    I'm guessing Horizon thought the extra expense of aluminium would cost them some sales. In my opinion this is an absolutely necessary upgrade on an RC vehicle like this one!

    • @urdonercjeremyburris7541
      @urdonercjeremyburris7541 2 роки тому +2

      Not everyone likes metal axles and I'm one of them . Plastic slides better

    • @SwampersRC
      @SwampersRC 2 роки тому +1

      @@urdonercjeremyburris7541 trouble is, this rig is big, heavy, and powerful. Flex in an axle housing is unacceptable! Plus it instantly lowers the center of gravity.

    • @urdonercjeremyburris7541
      @urdonercjeremyburris7541 2 роки тому +1

      @@SwampersRC some flex is ok. It's not a comp rig and never will be. No flex means easier to break stuff. Maybe if people would stop bashing it then they wouldn't break stuff

    • @urdonercjeremyburris7541
      @urdonercjeremyburris7541 2 роки тому

      It's just like the scx10iii everyone is breaking parts on it. We have 2 scx10iii and a 1.9 wraith with 10iii portals under it and the only thing I broke is pulled the pan hard bar out of a rod end because I was being stupid

    • @bikeislife8405
      @bikeislife8405 Рік тому

      I’ve upgraded the shock towers to aluminum on my SCX6, plastic isn’t the enemy imo, the axles slide nicely over the chunk

  • @Houleigan
    @Houleigan 2 роки тому

    You need to upgrade that driver! LOL! The truck is looking awesome now!

  • @old-rcplane-phart
    @old-rcplane-phart 2 роки тому +2

    I had my 1st experience today. From something ive not EVER done. In over 40 YEARS of being into rc.
    Had my 1st EVER lipo fire.
    Thats an extremely terrifying thing. NEVER again will i change ANYTHING without SAID battery being in a lipo bag. (Granted, smart packs used with smart chargers, its extremely rare.) I was using a zeee 3s/3000mah (1 week okd! 🤯), In an older venom 4 bank charger. Went out of the garage for 30 FREAKING SECONDS! Luckily, i had an extinguisher. That wasn't bad, mY 25lb service dog was in there too n couldn't get out.
    (MY apologies for venting, BUT ppl's GOTTA know!)

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      Dog is ok? Glad you caught it!! A local friend of mine lost his home a few months ago due to a lipo fire.

    • @old-rcplane-phart
      @old-rcplane-phart 2 роки тому

      @@ExocagedRC
      Yes sir i got chase out 3 seconds after i unplugged everything. Hit the 2nd garage door opener on our way out.
      The cleanup took a few hours.
      Starting today, if im not RIGHT THERE while charging, im turning off everything. I did order 8 single lipo bags. They arrive today.
      I can't imagine what id done IF anything had happened to chase.

  • @furball5553
    @furball5553 2 роки тому

    What can even be said about vitavon but everything can be said for your editing slow moe's are epic love the upgrade 👍

  • @BlueDually4x4
    @BlueDually4x4 2 роки тому

    Those came out a lot faster than I was expecting. Vitavon is going to make the SCX6 and the LMT leg breakers with all their parts. But they do look so much better than the stock parts.

  • @nickhathaway4617
    @nickhathaway4617 2 роки тому +1

    So badass wish I had your life awesome video

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      It’s work and work and a little sleep.

  • @brianargo1659
    @brianargo1659 2 роки тому

    Them axels and shock tower for sure gives it a more scale look!👍 I was thinking if u had some 3D printed sliders that could some how mount to the bottom of those axels would help them to slid and protect also

  • @endosrc
    @endosrc 2 роки тому +1

    lol. People in the rc discord server I’m in said there wouldn’t be any till next year 😂

  • @Jsmith9619
    @Jsmith9619 2 роки тому +2

    It would be cool to see how a lot of these (as in several on this channel) hold up and perform without $1k of aluminum on them......comes a point where it's not relatable one bit because the trucks are so far over the top.

    • @mikehagquist5198
      @mikehagquist5198 Рік тому

      Every pay check I order a vitavon part. That’s how I do it. I could never justify spending 2000$ at once to upgrade 1 rc.

  • @itistu
    @itistu 2 роки тому +1

    Very nice but I wonder if all this is worth it on a trail car. I'm not talking about costs. Do you have a great performance bonus? Very nice video also👍

  • @tomlucasrccrawlers9108
    @tomlucasrccrawlers9108 2 роки тому +1

    Nice work/review as always.
    I would've went with black axles.
    A pound off the top and moving to the axles is a huge improvement.
    I would think Vidavon would've at least have an option for bearing in the knuckles instead of bushing , there's plenty of room.
    Oh...the "tick,tick,tick SUBSCRIBE" is getting annoying.

    • @johngookinsable
      @johngookinsable 2 роки тому +2

      That tick tick tick is all UA-cam. It's that way on many channels I watch

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      These axles are nice. I can change the tic tic tic thing. I’ve been turning the volume on it down.

    • @tomlucasrccrawlers9108
      @tomlucasrccrawlers9108 2 роки тому

      @@ExocagedRC It just distracting from your video.
      Has anyone said anything?

  • @brianargo1659
    @brianargo1659 2 роки тому

    That is some good looking grease. But have u tried any of the Fast Eddy's red grease? Amazing is an understatement!!

  • @2040RC
    @2040RC 2 роки тому +2

    First! :) beautiful car and upgrades by vitavon!! Good job for the video! 😀

  • @norcalrc
    @norcalrc 2 роки тому

    Damn they already started building parts for this? Guess it’s gonna be around awhile

  • @modzilla74
    @modzilla74 2 роки тому +2

    Love the axles!. How is it that u don't have the vitavon beadlocks already? Or are u just waiting to put them on, in another video?

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      Don’t have them yet. There is a method to my builds. I almost always build the driveline before adding big power. But yeah soon on the beadlocks.

    • @modzilla74
      @modzilla74 2 роки тому

      @@ExocagedRC For sure. I've just come to expect from your past vidz that u are the guy to see for all things vitavon. All good. Whats the cost on those axle housings? @$200-250 each I'd guess

  • @robertopracht9748
    @robertopracht9748 2 роки тому

    Suuuuppppeeer

  • @sabresswords
    @sabresswords 2 роки тому +1

    Lmao @ "ermagerd yall"

  • @sunnyv1281
    @sunnyv1281 2 місяці тому

    Would u recommend getting his 718$ axles front and rear with internals or just the 418$ and use my own internals ?

  • @angelogasparro
    @angelogasparro Рік тому

    could you tell me if there are axles for scx6 on the market where it is possible to lock and unlock the differentials?

  • @just_inolredneck8319
    @just_inolredneck8319 2 роки тому +1

    Question I know your a Vitacaged lol but what’s the difference n the vit..than treal? I get the price thing but side by side testing? Just curious.. I’ve heard both good and bad on both..so just kinda wanted input… is it the bigger barrings or what? Just wondering cause technically they r both better than stock.. but just be nice to see them both get used on two trucks that r the same and after say… 3 months and go back in and see if there is anything wearing differently…? 🤷‍♂️

    • @ExocagedRC
      @ExocagedRC  2 роки тому +2

      lol I use Treal too. I just really like the Vitavon plus I'm a dealer for Vitavon so that helps. But you can't go wrong with either brand, just pick what looks best to you and go have fun.

  • @sunnyv1281
    @sunnyv1281 2 місяці тому

    I’m a little confused vitavon has front and rear axles , than he has housing , are those 2 different things ? And than there are portals that go into the axles which are the housing not the regular axles ? Please explain if you can thanks

  • @angelogasparro
    @angelogasparro Рік тому

    I'm looking for metal axles for axial scx6 where it is possible to lock/unlock the differentials, does vitavon have this upgrade?

  • @goreyboggs
    @goreyboggs 2 роки тому +1

    Is this thing good stock? I’m selling off some stuff to get one. Want to make sure it’s worth it

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      Yeah. Do the braces and when Vitavon has the ring and pinions, do those. Then upgrade as needed.

    • @RCinOC
      @RCinOC 2 роки тому

      What braces? The shock towers?

  • @DoubleADay
    @DoubleADay 2 роки тому

    Are you still a dealer for vitavon? I am ready to get axles for my trx4

  • @johngookinsable
    @johngookinsable 2 роки тому +2

    I need a bigger toy budget💁‍♂️

  • @homeschoollifeontheisland2118

    Hello, im helping my father inlaw set up his scx6 rangler. He changed the front and rear axles to the silver and black Vitavon ones and he also added the portal kit for housing.Since then the rangler has no strengh at all for some reason we believe something went wrong in the mounting process. Do you have any idea what could it be? If you have an email or number we can contact you for mote details I will appreciate it. I don’t know anything about this so we need some help. Thanks ahead of time.

  • @fredtieman1783
    @fredtieman1783 2 роки тому

    So much more beefy than stock axles

  • @thejeepinrealtor5742
    @thejeepinrealtor5742 2 роки тому

    Send me that panhard brace 😜😜 I need one!

  • @wiggi0483
    @wiggi0483 2 роки тому

    What if they made a 1/6 bomber

  • @BIGGBULLxxx
    @BIGGBULLxxx 2 роки тому

    very expensive upgrades... I'm in no competition so I'll just stick to stock and put some bigger wheels and tires on it.

  • @corydehaan8349
    @corydehaan8349 2 роки тому

    Shame they copied the panhard bar mount for the axle and the shock tower. Could have made it double shear and improved it...

  • @pcx4545
    @pcx4545 2 роки тому +1

    Crazy to think that playing with a 1:6 RC will end costing as much as playing with an 1:1

  • @reddeerrebelrc6674
    @reddeerrebelrc6674 2 роки тому

    Those should slide on the rocks nice...NOT