How to Install a Car Seat with a Locking Clip
Вставка
- Опубліковано 17 лип 2024
- Your car seat may need to be installed with a seatbelt locking clip for one of three reasons. In this video, learn why you might have to use one and how to install a car seat with a seat belt locking clip.
Why a locking clip is a must:
1️⃣ Your vehicle was manufactured before 1996.
2️⃣ You are traveling internationally with your car seat that does not have a built-in lock-off.
3️⃣ Your lightweight car seat is tilting after installation.
Looking to skip the clip altogether? Check out our Car Seat Buying Kits, where you can find a seat with a built-in lock-off perfect for everyday use and international travel. safeintheseat.com/car-seat-bu...
Grab a car seat locking clip here: urlgeni.us/amzn/lockingclip
Featured seat: Cosco Scenera Next: rstyle.me/+YxpwjMN7HqYqNNq8l6...
Read our review of the Cosco Scenera Next here: safeintheseat.com/cosco-scene...
#carseat #carseatsafety #carcrash #installation #carseatinstallation #internationaltravel
Thank you for this! My middle seat hasn’t been locking consistently and I was hoping there was a solution in the in between while we wait to get it fixed!
Thank u so much om dyslexic and I have a hard time I learn by seeing I appreciate u. U made it short and simple no complications
I'm glad this was helpful for you! Thanks for watching!
Great video. Glad I know how to use one now if I need it.
Thanks for watching!
Very helpful video, thank you!!
You're welcome!
This is so helpful! Would i need to use this when installing a car seat on an airplane?
Thanks for watching! No, a locking clip can never be used on a lap only belt, which planes are equipped with. Airplane seat belts can be tightened so nothing need to be added to them when installing a car seat
Thanks for the info! My child seat doesn't have a locking clip, any recommendation on a safe one that can be bought in Amazon?
If you contact the manufacturer of your car seat, they will send you one for free.
Hi Michelle--can I use the locking clip on the Cosco Scenera Next when I take it on an airplane?
You can't use it on the airplane. Locking clips are only for lap and shoulder belts. The airplane belts are lap-only belts and you just pull to tighten them
If you are using a locking clip on the Cosco Scenara Next since it is so lightweight in a vehicle that does have locking seatbelts, do you use the locking seatbelt in ADDITION to the locking clip? Or would you just use the locking clip in this case?
You only use the locking clip.
Hello. Docars in europe still not have the ALR seatbelts? Travelling with my nuna rava, wondering if I need a locking clip or not!
Thank you!
You will need a locking clip to use the Nuna Rava in European vehicles. You can contact Nuna and ask for one.
Do you know if most European cars have the latch system? Wondering if I should travel internationally with my base instead of trying to use locking clip
Since Feb 2013, all Euro vehicles were required to have ISOFIX/LATCH, so as long as you don't get into an old vehicle, you will be good.
Is the “Safety Buckle Pro Seatbelt Lock and Seat Belt Locking Clip - Strong ABS Plastic Buckle Guard” safe?
No, you have to use a metal locking clip. It's best to get one from the car seat's manufacturer
Just making sure I understood correctly. It is safe to use a locking clip even if your car seatbelt has a lock. Correct?
My Graco extend2fit lifts like crazy. I’ve tried installing 30+ times without locking clip but I can’t get it tight without major lifting
Yes, you can use the locking clip instead of locking the seat belt.
Hi Michelle, I live internationally and need to use a car seat on a bus service that has lap belts only that have an ELR retractor. So I couldn’t use a locking clip? What alternative would I have? I’ve looked very where and can’t kind find a safe option.
Locking clips cannot be used on lap-only seat belts. If the lap belt tightens in some way (and I have yet to ever see one that does not), you are good to install the seat with that type of seat belt.
An extra set of hands, can they just install the locking clip while it’s still buckled?
I wish. But the seat belt is too tight when buckled and pulled tight to get the locking clip on. You have to be able to fold the seat belt a bit to get the locking clip on, which you can't do without unbuckling.
Is this a Wagoneer? We have the Graco Slimfit3 LX 3 in 1 and a Wagoneer and can’t get the seatbelt A- to lock and B- can’t get it tight enough using seatbelt or tether anchors to not be able to flip upwards if hit from behind. Could this help? Any suggestions on whether it’s normal for a car seat to be able to flip upwards (head of car seat able to flip up towards own head rest if hit from behind)??
Yes, it is. After you install a car seat, you only check for movement where the seat belt is going through the seat. It will always move in other places. Using a locking clip will not change that.
If we lost or misplaced the locking clip that came with our car seat is it okay to buy an universal one from Amazon or should I look for one from the manufacturer
Contact the manufacturer to get one. Many of the ones sold on Amazon are counterfeit and will not hold up in a crash. They are extremely thin.
How can you used a locking clip with a Doona and no base?
I don't have a video for that right now and it's really hard to explain in text. There are 2 different ways to route the seat belt when installing the Doona without the base. You choose one of those methods, get the seat belt tight, unbuckle it, add the locking clip, and then buckle it again. Check to make sure there's no more than 1" of movement where the lap belt portion of the seat belt is attached to the car seat