Gy6 150cc autochoke to manual choke conversion

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • Some Ruckus gy6 swap harnesses don't have a connection for the auto choke, so it gets removed and the hole filled, or left unplugged, or maybe you just don't want to deal with them failing on your scooter.This allows you to cheaply and easily install a manual choke on your auto enrichment needle (auto choke) on your gy6 150cc engine.

КОМЕНТАРІ • 36

  • @alexsbikesandmotors
    @alexsbikesandmotors 3 роки тому +6

    Just did this on my Honda elite 80. Worked great. Before my bike was running way too rich on startup. I threaded the bolt maybe 1 1/4 inch into the choke so its always off. Still starts up cold fine like that

    • @amatureskater15
      @amatureskater15 2 роки тому

      I'm about to do this to my tao tao 72cc bbk build. then next... my ch80. Glad too hear it works well.

  • @LifeExplosion
    @LifeExplosion 2 роки тому +4

    Yeah thanks bro this is great. I'm sick of my electric choke constantly stuffing up the starting process so I'm going to remove it completely and send it to manual like you did

  • @klausbrinck2137
    @klausbrinck2137 8 місяців тому

    3:46 I used this litttle mounting-clip as a stencil for 2 holes on an equally-sized small metal plate, the same size as the 2 holes of the clip.
    Then I made an even bigger hole exactly between those 2 small holes, and threaded it.
    Then screwed a bolt through that bigger hole, and also screwed the bolt´s end on the e-choke´s needle-stack, that has a piece of plastic at its top-end, with a hole, in which above mentioned bolt could be screwed in (self-forming the threads in the plastic-hole while you screw the bolt in).

  • @WaveAction777
    @WaveAction777 4 роки тому +3

    My scooter's enrichment won't work. Took carb apart and all passages are clear. Enricher itself does work, it extends with time to close, but idle is just constant at low idle, cold or hot. I made a test flat plate with a gasket to replace the enricher and see if I get a fast idle when cold and idle is always low. You'd figure if the passages were clear from inside the enricher housing to the carb, the fast idle would engage with the flat pate. But it won't. Any ideas ?

  • @mrjaybennett80
    @mrjaybennett80 Рік тому +1

    That was F***ng AWESOME.

  • @frankmiranda1352
    @frankmiranda1352 2 роки тому +1

    Worked for me with way less material kept one spring

  • @jmac7272
    @jmac7272 5 років тому +2

    Thanks

  • @user-ib5ct3ry9v
    @user-ib5ct3ry9v Рік тому

    Awesome thanks!

  • @elderfogelderfog3598
    @elderfogelderfog3598 8 місяців тому

    I tried twisting mine off but that suckers welded in there

  • @WhitBoss
    @WhitBoss 7 місяців тому

    Does one apply heat before attempting to twist it out? My plastics snapped when I tried it cold. I ordered 2 more to experiment and I WILL share my results when successful as failure is NOT an option. LOL
    But seriously, will applying heat help loosen things?

    • @eric67miller
      @eric67miller 4 місяці тому

      I tried my heat gun on high, started melting stuff, still would not release.
      I ended up using "Starbond super glue remover" to get it to break loose, possibly acetone or some other solvent might work also. There is a locking sealant in the threads.

    • @bdates1111
      @bdates1111  3 місяці тому

      I never had a problem with it. Low heat could work, but I would use a rubber mallet or plastic hammer and gently tap around the glue joint a few times

  • @eliaslundstedt5607
    @eliaslundstedt5607 3 роки тому +4

    Oh damn, thought dad was the only person in the world that owned thoose crappy screwdrivers. they are so shit, I only use them to pry, as the flatheads are thin af

    • @bdates1111
      @bdates1111  3 роки тому +2

      There's one of those screwdrivers in every box of random parts I own. I keep throwing them away, and they keep showing back up. 🤣

    • @eliaslundstedt5607
      @eliaslundstedt5607 3 роки тому +1

      @@bdates1111 lol

    • @firebladex8586
      @firebladex8586 3 роки тому +1

      yeah they are garbage. I've moved on to quality Wiha precision screwdrivers.

    • @joeybomba8046
      @joeybomba8046 2 роки тому

      We need to do is get those Good harbor freight tools

  • @edwardmoss9647
    @edwardmoss9647 5 років тому +2

    Please show complete,,, from, your side

    • @bdates1111
      @bdates1111  5 років тому +2

      I'll put up another video showing the completed project.

    • @bdates1111
      @bdates1111  5 років тому +4

      This video was actually made privately for a friend to complete the task. I decided to make it public in case it could help other people, so it's missing some elements I would have added if it was originally intended for the public.

    • @bardinkurtis
      @bardinkurtis 3 роки тому +1

      Wtf are you talking about lol

    • @edwardmoss9647
      @edwardmoss9647 3 роки тому

      @@bardinkurtis wtf, no ,, i just wanted too see the bolt and 2 nuts,, in the middle,, its cool,i just use my choke and screw the plastic in and out,works ,i cut the side away from electronic, with a sharp knife ,3 turns out,3 back in, cut away ,the plastic in sit,,yeah for my hand too turn the manual choke

    • @icandsc
      @icandsc 2 роки тому

      @@edwardmoss9647 wat

  • @ljaymaster
    @ljaymaster Рік тому

    How long of a bolt should be used...?

  • @rockwithmoss1901
    @rockwithmoss1901 3 роки тому

    Also simply unplugging it at the other end will work.

    • @999benhonda
      @999benhonda 3 роки тому +2

      yes, but it will always run a bit rich that way.

    • @ljaymaster
      @ljaymaster Рік тому

      No it won't...

    • @shalotfpv
      @shalotfpv Рік тому +1

      @@ljaymaster these electric chokes "grow" pushing the enriching needle to close the circuit. When no current is applied it retracts and again enables the choke. By unplugging there would be no power, so I think it would let fuel flow through the enricher. Mine is stuck closed so I can unplug and not run rich, but only bc the bistarter is broken.

  • @gs8282
    @gs8282 2 роки тому

    Thanks