Guys! Relax chill up! He is only showing peopl3 who think making an aquarium is hard! So if you wnat to make your own aquarium, you use type on the floor or a table to make sure you are using the same mesures you choosed, and a silicone clear tube (transparent) and glass (you can chose whatever sizes you want, you its very simple) and following his steps depending what sizes you do have, you'll be making your own sized aquarium, later you can fill it by anything you want, plants, decorations, some you can make yourself using only ciment or gypsum, and some toys too plus ofcourse your favorite fish
👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻💐💐💐💐💐💐💐💐🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👍👍👍👍👍👍👍 काश व्हिडिओ मे आप बात करके कुछ समझाते तो और भी अच्छा लगता ग्लास का साईज कितना लेना कोणास ग्लास कैसे फिट करणा ता की हमे आसानी होती बाकी व्हिडिओ बहुत अच्छा था हमे तो पसंद आया ✨✨✨✨✨✨✨✨✨
I have a 10 gallon aquarium but the rebuilding might be a little trick because the bottom glass rest on a bottom trim and the the side glass panels go inside the trim and connect to the side of the bottom glass so the bottom glass is raised they do that for safety I guess. So I can’t just lay the bottom glass and put the silicone on top of it and put the side pieces on top on the bottom glass or it won’t fit back into the trim so I have to make it exactly how it was before but I can’t find anyone on UA-cam with a video of building the aquarium type I have
Check in the silicone tube if it says 100% silicone then it's safe but silicone with other added chemicals maybe harmful but if u keep water in the tank for like 4days and do water change before putting fish then it's okay for fish
@@kandukurumahesh3609 don't know why..but this is how it's normally done. I guess it's better this way, while we lift the aquarium and shift. Otherwise the weight of vertical glasses will just hold on the gum alone. If its over the base, the base will hold them.
Allways outside on the base, please. So there are three layers of glass when (accidentaly) hitting the corner dure manipulation instead of one. And also because you are hidding the seam from the front view. You are not supposed to lift aquarium filled with 150 litres of water (ofc) and sillicone bound is strong enough to hold glass side.
i was looking at comments and lot of you asked for size and cost - l 30 h 15 w 12 - and clear glue is rs 300 in Pakistan - around rs 1500 cost for full box - i dont know where you live and what are costs in your area
Grazie x il tutorial. Rispetto ad altri artigiani hai lavorato in maniera più grezza e questo mi ha rincuorato perché ho acquistato una vecchia vasca che ho ripulito ed ora mi tocca rifare le siliconature interne. Ho visto che nel bene o nel male ci si riesce a sigillare il tutto anche con il dito nonostante venga un lavoro più grezzo. X mia esperienza con un piccolo terrario darei come consiglio a chi come me è un po pasticcione, di munirsi di tovaglioli di carta imbevuti di alcool per ripulire il dito dopo il passaggio di stesura in modo da evitare di pasticciare troppo il vetro .
@@varaprasad0369 silicone is the best I have 3 ft tanks built with it... and built my 1st tank at home 1.5 ft... will be uploading the video in a few minutes
Watch it with 2x speed
Iya bang, terlalu lambat ya. Kalau sudah expert bisa cepet, tapi kalau masih amatiran seperti saya 🙋 ya pelan pelan gitu.
Watching
Yeah💗💗
Me watching in 0.25x: 👶➡👴
Right
Guys! Relax chill up! He is only showing peopl3 who think making an aquarium is hard! So if you wnat to make your own aquarium, you use type on the floor or a table to make sure you are using the same mesures you choosed, and a silicone clear tube (transparent) and glass (you can chose whatever sizes you want, you its very simple) and following his steps depending what sizes you do have, you'll be making your own sized aquarium, later you can fill it by anything you want, plants, decorations, some you can make yourself using only ciment or gypsum, and some toys too plus ofcourse your favorite fish
बहुत ही बढ़िया आपने दिखाई है भैया बहुत बहुतधन्यवाद❤❤❤😊😊😊👍👍👍
There’s only one King of DIY bro..... 👑 🐠
Fantastic, hugs from Portugal.
I liked the simple way of presenting the video.
Many successes for you, and a year of 2023, full of positive things.
Can we use any other things instead of finger to spread silicone adhesive , just like rubber squizy.
Work is systematic 👌👍
Melodious background music. & Easy skill to D.I.Y.
THANKS, very useful.👌
Your aeowana is superb
1235
Thank you❤️😇
I would recommend using Aquarium grade silicone. It might make sense to cut the tape first.
That's silicone which he is using is aquarium grade infact it's the best silicone
plzz provide that links and rate of the glass peaces and gum bro
Support strips are missing. two supports at the top and 2 supports at the bottom will make it even stronger
Its called braces
You are right.
How bottom?
Super bro
How many days will it take to use the tank aftet applying sillicon gum?
48 hours
sir- Good Informative video, I am planning to make same size aquarium. One question for 2.5 feet aquarium how many silicone tube you used/required ?
Good, but you could show us the complete set up of an aquarium. Anyway, thanks a lot
You can make two aquarium with one 300ml tube
अब मैं भी अपने हाथ से ही बना लूंगा दुकान वाले बहुत ज्यादा पैसा मांगते हैं😊😊😊
👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻💐💐💐💐💐💐💐💐🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👍👍👍👍👍👍👍
काश व्हिडिओ मे आप बात करके कुछ समझाते तो और भी अच्छा लगता ग्लास का साईज कितना लेना कोणास ग्लास कैसे फिट करणा ता की हमे आसानी होती बाकी व्हिडिओ बहुत अच्छा था हमे तो पसंद आया ✨✨✨✨✨✨✨✨✨
Nice work 👍👍👍👍👍
I have a 10 gallon aquarium but the rebuilding might be a little trick because the bottom glass rest on a bottom trim and the the side glass panels go inside the trim and connect to the side of the bottom glass so the bottom glass is raised they do that for safety I guess. So I can’t just lay the bottom glass and put the silicone on top of it and put the side pieces on top on the bottom glass or it won’t fit back into the trim so I have to make it exactly how it was before but I can’t find anyone on UA-cam with a video of building the aquarium type I have
It doesn't matter, it good either way
I don't understand can you post a video
put sides 1st thn base inbetween OR base 1st and make sure its at the center, your silicone you put it on the side panels
What is yhat white thing you used to stick all the sides?
Paper cellotape....
Um, excuse me what were the measurements for the glass, I'm considering an aquarium upgrade
What kind of glass you used here
How can I know if the silicon good for fish or no?
Check in the silicone tube if it says 100% silicone then it's safe but silicone with other added chemicals maybe harmful but if u keep water in the tank for like 4days and do water change before putting fish then it's okay for fish
What is the use of pasting tape on surfaces pls tell
So the glass doesn't move when a bit of friction is applied. If you use a rubberized surface it helps to see the lines to keep it straight
@@justincv thanks
Is the glass glued to the outside of the base or on top of the base?? Couldn't really see
Good point... all 4 vertical glasses should stay on the base... above the base ... Not outside..
@@kollawrance7401 Thanks bro I had a doubt on it ❤️
@@kandukurumahesh3609 don't know why..but this is how it's normally done. I guess it's better this way, while we lift the aquarium and shift.
Otherwise the weight of vertical glasses will just hold on the gum alone. If its over the base, the base will hold them.
Allways outside on the base, please. So there are three layers of glass when (accidentaly) hitting the corner dure manipulation instead of one. And also because you are hidding the seam from the front view. You are not supposed to lift aquarium filled with 150 litres of water (ofc) and sillicone bound is strong enough to hold glass side.
Both is possible
is this selicon strong enough to hold glass without leak?
Yes it is I have good experience with it it's a very good silicone
My tank started leaking after 20year, but it's okay 20 year is a long time.
You can check my aquarium in my channel.
How you stand the aquarium it's not dry then
Free hand Job .what a cool GUY .
What is the size of the aquarium? Looks good...
Super 👌
awesome job keep it up sir
Super bro Nice video
Is it dangerous for fingers silicon
How much it takes dry silicone glue ..??
When will we use after making ..??
read the directions.
Wow nice work indeed so what type of cericon?
People should stop encouraging such youtubers who do not interact with their followers. If not all at least 50
Fact
Nice video
Can we use this
kya hum 8 mm glass mai 4*1.5*1 ka tank bana sakte hai
Ha
Yes
Is that silicon is gud for aquarium?? It’s price ?
its the best.
Brother I wants to built 5fy2 ft 2 ft aquarium for discus with 16 mm clear glass can you please guide me with expected cost 🙏
@Sas Das thanks for wooden cover..🙏
we can make it with hot glue??
Glass kitna mm ka hai sir
Glue gun se nahi kar sakte ky sir ❓
Noo bro
Silicone konsaa lena ka bhai
General purpose silicon
What is glass mm ....
6 mm
Hie, thanks for sharing the content. I have the silicon, but I don't have a gun and wish not to buy one. What else can I use to replace the gun?
Use gun. Its better. Less messier.
The back of the hammer works too just push it
Kalo tank Aquarium baru, berapa lama menunggu lem kering sampai siap diisi air/siap digunakan om?
Can i use dowsil neutral plus silicone?
It has to be 100% silicone
Ya kya aquaria m jord na ki Glu ha is sa glass jord ta ha kya🙄🙄🙄🙄😉
Ys
i was looking at comments and lot of you asked for size and cost -
l 30 h 15 w 12 - and clear glue is rs 300 in Pakistan - around rs 1500 cost for full box - i dont know where you live and what are costs in your area
Costs same in India as well😊
Sir woh gum 1hrs se sukhjata hai
Haan sukhjata hai
Grazie x il tutorial. Rispetto ad altri artigiani hai lavorato in maniera più grezza e questo mi ha rincuorato perché ho acquistato una vecchia vasca che ho ripulito ed ora mi tocca rifare le siliconature interne. Ho visto che nel bene o nel male ci si riesce a sigillare il tutto anche con il dito nonostante venga un lavoro più grezzo. X mia esperienza con un piccolo terrario darei come consiglio a chi come me è un po pasticcione, di munirsi di tovaglioli di carta imbevuti di alcool per ripulire il dito dopo il passaggio di stesura in modo da evitare di pasticciare troppo il vetro .
How much cost ??
Total how many gum tubes
pls tell me 2ft by 1 ft glass mejurment 8 mm glass
how much time take to dry the gum.?
and when we can put the fish in it?
Minimum 12 hrs but keep it for 24 hrs... its silicone so it will smell... i have used the same one in my diy tank... which is next video on my channel
for 20 hours. ie. after making in the evening, keep it for whole night. and then in the next day afternoon you may start using it
@@benaqua10 silicon is enough for 2.5 ft tank or we need any strong glass gum??
@@varaprasad0369 silicone is the best I have 3 ft tanks built with it... and built my 1st tank at home 1.5 ft... will be uploading the video in a few minutes
@@sushs7991 after 1 day fill with a few inches of water to test for leaks if any....
Glass size ???
Cut out size pls mention
Nice telend
Whar are the dimentions?
Kon sa glue use kre maine 2 times bnaya but leakage ho gya
Will be uploading a diy aquarium tank on my channel this week
Nice job
Can u tell me PLZZ ... What is the name of this gun plzz
Glue gun for aquarium...... It's available in Amazon
It's very cheap under 100 rs
Will be uploading a diy aquarium on my channel this week
@@THECODERSPOINT glue gun is different.. its silicone gun
Silicone gun
why some place longer side glass on top of bottom glass and others place it on the side of bottom glass?
فنان وعمل بغاية الروعة والدقة
Price for making 2.5 feet aquarium
Around 20$ in my country
1650
How much does each glass cost
It varies based on the thickness of glass
@@amaljith7616 5mm thickness price?
@@aashiquekhan2325 I think it is 10 mm glass
65 to 85 rs per square foot
850 for all 👍🏻
Kitnaa mm glass hay
5-6mm
What glass i use
How much time to take it cure?
Sir 2.5 ft length ho gya
Width kitna or height kitna rkha
The Best
не дай Бог, что бы такой мастер склеил мне аквариум !
Sir price
Whatvis the name of gam... Atha..
Silicon
What is the mm of glass.please reply.
PARTH NIkHADE001 the aqua tools google it
8.mm
Thanks
Bhai ye mirror kitne mm ka hai
Bhaiya 2fit ka aquarium size kya hoga
RASHI YOU ARE QUITE CUTE CAN I GET UR INSTA
sizes?
DIY aquarium :
.
.
10 secs later after viewing tools required shows it already done.
Can u tell me which size of glass u are using for
cool bro
Dada itaki fibre
Sir ji aap kaha se he .me bhi sikhana chahta hu .
Aquarium price kya hai
Super like top 10
Jana3916
What's the length and width of this aquarium
as u wish😘
What’s name of the silicone
What is the Height and width?
Where do I get the glass ?
From glass shop
👍👍👍👍 Bro
2 feet bottom height 1.25feet ,all glass correct size class purchase recommends please
Glass measurements plz
Mantull...👍👍
😊☺️🧁❤
Bro pls mention about the measurements and thickness of glass.
6mm
Measure kitne hai
5mm
Dimensions kya hai and glass size
l 30 h 15 w 12 - and clear glue is rs 300 in Pakistan - around rs 1500 cost for full box - i dont know where you live and what are costs in your area
Super
Gp silicon thik hai naa
What are the sizes of the glass?
2.5x1.5x1.5 feet if im not mistaken