Farmall A Plowing with a Little Genius 2 Bottom Plow
Вставка
- Опубліковано 15 жов 2024
- Farmall A Plowing with a Little Genius 2 Bottom Plow. Antique tractor in operation on the farm. Very old farm tractor in operation on the farm. #farmallfanatic #farmall #antiquetractors
Ya know, you're the right scale for that tractor. When I'm on my Cub, I look like GI Joe sitting on a Match Box car.
How tall am I? Lol
@@FarmallFanatic Hmmmmm.... 5' 6"??
Keep one thing in mind. When the A came out in 1939 and the Cub came out in 1947, they looked like an M to a farmer who had been walking behind a mule for 40-50 years.😁
@@MarkWYoung-ky4uc Agreed! They could also see what's in front of them & the exhaust pipe was no longer pointed at their face. 😁
And when I sit on my 806 I am the total opposite of you 😂😂😂
This reminds me of going to plowing matches with my grandpa. He had a farmall BN and a little wonder 2 bottom plow. I used that setup to take 3rd place in the Jr. Division at the big rock plowing match when I was 12 years old! My uncle still has the tractor and plow and when I see him I always make sure to take it for a spin. Sates my hunger a bit while I wait for the right time to get one of my own.
I’m truly surprised how well that A pulled two bottom plow. I would never have thought it.
That’s a real nice looking and good sounding old Farmall A.
The Farmall A is rated a 1-2 plow tractor. I am amazed how well it pulled it, too.
@@tyfrank3427 in Missouri A’s were a single plow tractor, C pulled two 12s, H pulled two 14s, and M was three plow tractor. Missouri has lots of clay in soils, so my experience and what I saw where I farmed may not be representative across the country. We had a little Super C with two 12s and it struggled somewhat when you would get in tougher soil situations 😜😜
@@steveimhoff5646 Soil type is everything. My dad grew up about 13 miles as the crow flies away. My grandpa had a 3 bottom plow, a packer wheel, and a pony press drill. He pulled it all with a W-4. Here, 2 14s is plenty for a W-4 on normal going and it wouldn't pull it at all in sod. On crop ground, Dad typically pulled 5-14s with an 806, 4-16s with a 650 and 4-14s with a WD-9. He did pull 5 14s with the 650 but it made it work. On hay ground, it took the 806 to pull 4-14s. We currently pull 6 16s usually with a 1206, or 1066, but this year we used the 4186 and of course, that doesn't know the plow is back there.
I love it ! I know she has the power . I see the weights and she is not slippin . Does she have fluid in the rear tire's ? I have a BN and have been kickin the idea of finding a 1 botttom 16 inch little wonder or Little Genius. I have weights for My BN . Your Little A runs awesome ! Thank you for posting this video ! You kept me on the hook to long waiting for this video buddy :)
When I was on the farm we had 1 Farmall 100 and it pulled a disk and a subsoiler and plowed 30 acres of tobacco.
That A will pull in 3 gear with no problem, may have to start in second then shift to 3rd.
You have a good little strong tractor.
You’ll love a Super A with the hydraulic lifts, hinting on your next purchase.🇺🇸🚜
Hahaha or a Super C
That's going to be a fun little tractor to have around!
I grew up with Deere’s but worked with other farmers who had a lot of different Farmals and loved driving them back in the 60s and 70s . Something about old tractors which made America what it is today!
Blessings from Ohio
Agree 👍
I had my pop corn and had a smile watching that A pull the 2 bottom plow .. there's nothing like having a old tractor still doing work today just like it did brand new .. I still have fun with my old tractor..
They were made solid 👊
Been waiting on this! Here we go ! You should be okay.! Plowed many times with JD 4020 with 5-16’s with front tires off the ground! Same with the Massey Ferguson Super 65 and 165! Yeah just be ready your turn it over it’s your ass! LOL!!! I believe she did alright for a garden tractor doesn’t seem to be laboring at all! He’ll never seen such a thing I’m impressed! Second gear does the trick ! I’ve said it many times throughout the years! You can’t beat a Farmall! Ya just can’t
No you can't...I'm still in shock
As someone who's grandfather had a 140 and a super A, I can smell what this video looks like. Fresh ground , manure and exhaust.
Nailed it 👌
Lookin' great! Now you know the immense power of the mini Farmalls!
Mighty MOs
@@FarmallFanatic Indeed!
That’s an impressive little tractor. Not bad at all for 75 years old!
Runs new
Glad you had a great day I could see a big SMILE on a new owner. GREAT TRACTORS them A and super A and 100 we had all 3 Cjd wash state 😊
Love your channel you have inspired me to start row crop farming one day thanks
In 1941 my great grandpa bought a farmall a and a little wonder 2-12 plow and he farmed 80 acres with it until he upgraded to a wd45 allis. We still have the little farmall a on the farm it has never left but don’t have the little wonder plow would like to find one someday.
I think I know where one is
Rolls nice in second. Love that Farrmall A. Thanks from Georgian Bay
It pulled that plow really well! It running great too. I think you got yourself a really tractor Farmall! Looks good in that field! lol have a good weekend! See ya!
Our first tractor was an A hand crank. It came with a tractor mounted single 18" We would plow two 40 acre fields (forever) in 2nd gear. Dad traded my favorite little tractor when I was in the military; sorry day when I returned home to learn the little A was no longer on the farm.
You've definitely put your time into a tractor seat
When tractor and plow are set right and working in harmony it doesn't take a great deal of power . Good work. BTW Things look dry up in NW Pa as well as the rest of the state. Until that Northwesterly wind changes to the Southwest likely to remain dry and cold. Good reminder about tractor safety. Several accidents around my area over the years. Guy was killed when he flipped his Super C. Another one had his WD45 snap coupler break flipping it back on himself. Compound leg fracture. A 16 year old rolled his Fordson Super Major down over an embankment crushed to death.
Its hard to say from here, but it looks like setting your coulters a little deeper might help cut the trash better?
I bought a L.G. 2-12 this year an put it behind our farmall 140 and it is a great match as far as power goes. The interesting thing was hitching it 4" LEFT of center on the drawbar (wheels set at 48" for row cropping everything we plant)
I recently bought a Farmall A. I checked the compression cold and they all had 75/80 psi except 1 had only 50 psi. Wondering what kind of psi I should have? Thought this would be the place to find out. Thanks in advance for the help.
90 plus with less than 10 percent variance acrossed the board
My parents had a farmall A when I was little, we lived in Alaska, It may have been a cub, all I know is it had that offset engine, and an extra set of wheels that floated along behind the front axel for a set of half tracks, it had a 3 pt hitch and discs. It was pretty cool, Id actually ride on it with my dad, i could ride anything, his dozer, tractor, dump truck, id fall asleep on the dozer. Allis Chalmers HD6 😂 I remember the farmall had these two rings you’d pull to start the engine.
That sounds right
Hello Again From KY. I was kind of wondering what you thought of my theory about the pistons/sleeve modification now that you have been plowing with the tractor. Does your engine have a fan but no water pump. I think that was the C-113 engine. My Dads tractor was a 1953 Super A in which I think that the next year’s engine may have had a water pump. It’s been a long time since I studied the progression of McCormick FarmAll tractors to remember which tractor had what engine. I’m getting in the mood to try to bring my Dads Super A back to life. I bet you are glad you bought that tractor - I would be.
I'm gonna really look it over and see if I can figure it out
I have a two bottom Little Genius for my F20, watching this makes me want to try pulling my two bottom with my Farmall B.
The C was rated for two bottoms with pretty much the same engine, I think it was more a traction thing than anything. Obviously the ground plays a lot in that calculation as well. Awesome looking tractor, '47 was the last year for the regular A!
Might have had the same engine, but it was most definitely not the same horse power or weight. Thank you!
I think a Super C would pull 2 almost anywhere. They have the C123 so they would definitely do it.
@@tyfrank3427 The 200 we had worked well with the fast hitch 2-14" plow. I know I plowed up a sod once with my BN and it's BN-187 16" plow and it was EVERYTHING that tractor wanted. Tough ground in these parts...
Only a couple of HP differences between the A & C (just a higher RPM) but yeah, more weight for sure from the factory and bigger tires.
@@msad40kopishke Sod is a different kettle of fish altogether. You need a lot more tractor or less bottoms for sure. Here, the way we deal with sod is we generally chisel plow it twice before using the moldboard plow. A 200, would be a nice little tractor. There are none around here. In my area, the extent of the 100 series tractors are 300 Utilities, W-400s and 600s.
Its plowing good. You got better soil than we do. In our Ozarks heavy red clay a H will barely pull a two bottom plow.
I'm definitely lucky
I’m glad to see this great video bud no sweat for her. That ground don’t look to bad good thing that’s not all heavy clay
Sounds great under a load. Second gear.
Burning was an old way to stop clogging of plows that removed a lot of nutrients from the soil. It was often done in my youth and now we often plant a good plow down. Run a disk over it may have save you some problems.
Great seeing that old equipment run.
I was always told that burning puts nitrogen into the ground, but now we know we're better off with detritus material into the ground
Nice to see some old school iron doing some old school plowing. Way to go Old Timer!!
Boom 💥
Well, you’ve now inspired me to make another purchase for my A. Just yesterday purchased a Little Genius 2 bottom plow, with a pintel hitch. Can you provide a video on how to hook that onto a drawbar? What’s required, and how to operate? (You previously provided to me some great guidance on where to find a belly mower. Facebook, Marketplace. That worked well, thank you!)
I might already have a video if you go to my Farmall A playlist
Have you ever heard of the side disk plow for the A? It actually works great for a step up onto the tractor. It's like a 22" disk or so.. It does the same thing as a turning plow but just one pass at a time.
I've seen them...they were made for harder turning ground...very cool
They also make a fast hitch tandem disk pull behind one to.
@@grayghost75 haven't seen one for sale yet
Disk breakers were very popular in the deep south essentially because of most ground being formally hard wood forrest and the beyond numerous stumps and large roots they would roll over those instead of digging in and hanging up regular moldboard plows would be a problem with continuous tripping or hang ing if the trip mechanism was bad. Hitting a stump at 4 or 5 miles an hour and sudden stop was not good
Nice to see the old stuff works just as good as the new does
Nice!! I got a nice 53 Super A. Only thing i dont like is 1st gear is quite fast for my liking. I wish they had more of a granny gear
Mine had a bad bendix and flywheel now too. Wore the teeth out and doesnt engage. Im hoping a new bendix gear will be enough to engage it. I really dont wanna break tractoer in half to put new flywheel on. I gotta hand crank or pop clutch to start it
Yeah it would just depend how far a gone the flywheel is
It sounds and looks good. I was surprised how well it did. Not too many people take a 74 year old tractor to the fields for a day's work
No doubt
Wonder if has been rebuilt with overbore kit already seems to have good power
I douted it would pull two looks heavy ground. Nice job little A
Great job on the two bottom plow. I have an A with a single 16 in. On it. It is all the A wants. Lol
I almost bought a single bottom john deere this passed weekend n backed out
Drone shot. Nice left hand plow and A
Hahahaha
Did you get that beard at the auction ?? Can I ask what you gave for it???
I came to see the A. I never saw one. Before.
It really sounds good. Stout.
move tongue over to your left a little in the draw bar. The furrow wheel needs to move left about 4 inches. Front plow not taking a full bite.
At the end of the video I was buried
...When you were talking about adjusting 1 notch at a time and 1st gear. I could heat the "A" saying.
"C'mon dad, pull off the training wheels and let's get going...!!"
Now that I know what to expect...it's go time
The A handles it good. You should surely be able to pull five 14" bottoms or four 18" bottoms with the 756 but you will need 18.4-34 tires. The little A does a good job.
I can definitely pull 4x18s with the 756
@@FarmallFanatic 5 14s are actually less plow believe it or not. We still have the Oliver 5-14 and 4-14 plows but haven't used them for years. We have pulled the 5-14 with a 650 and it did it in really hard pulling soil. Although, Dad usually pulled the 4-14 with the 650 and the 5-14 with the 806. The 650s aren't much less tractor than the 756. At some point, I'd like to hook on to the 4-14 plow with my Super W-6 and try it.
I definitely think it could do it
Was never any doubt in my mind that the little A wouldn't master the 2 bottom plough 💪💪 BOOM💥👍
Looks like you need to lower the plows furrow wheel some more. Your plow is not running level from side to side. The hitch should be adjusted to run slightly up hill when hitched. The rear landslide should be leaving a lite mark in the bottom of the furrow with the wheel taking the rest.
This was a first run lol
What a sweet little ride and a great runner
Now I might have to try my C and little genius plow
Little red hollers back at his big brothers in the shed and says "I can do this stuff too!" It might look small beside the big boys but to a farmer in 1947 that spent 40-50 years walking behind a mule, it was a sure enough HOSS!
A lot of the parts on that plow look exactly like my Dad’s old Massey Harris plow he bought in the early 50’s. Wonder what is the story on that. Did IH make plows for Massey Harris, or did Massey Harris make plows for I H, or did a few independent companies make parts for both ? Anyone know?
I am 99.9% certain that International made their own plows
Try setting your coulters further outboard. I started at the recommended 1/2 inch but didn't get good results. They ended up close to an inch before I got good trash clearance and good furrow walls.
That's cool. Been watching for awhile maybe I missed it what's up with corn still standing?
That's a little bit that I left for deer hunting and just haven't taken it down yet
Dang! Do trailing plows pull easier than mounted plows? It did great!
This one does
I knew that A would do it. I like plowing in 2and gear with my Super A dirt rolls off the mold boards better.
Yea 1st is a great pull gear, but not plow gear
Knew it would do it but then again beat you to the power test by a few years. Speed and fun my mounted single 16 plow from is an awesome toy.
Nice job, a tractor ment for one bottom!
Move it over a notch on the draw bar will help too.
That's exactly what it needs
Hello I am new to the farmall world.. I have an A and am having a hard time finding a plow for it. Is this a fast hitch because I just have a drawbar. Thanks!
No that's just the draw bar
The awesome A gettin' it done.
FF back with my favorite Traxtor
Do you think an "A" can pull a 2-16? I have one but I don't want to waste my time dragging it out if it can't pull it.
Depends on your soil...Clay I say no
@@FarmallFanatic I have rocks, and some more rocks and maybe a little bit more...
scrolled threw a few comments didnt see size.. 2 14s? i got 2 16s by David Bradley.. i got a farmall A put dually rear tires on it.. disks pretty good
That's a two fourteen
She pulled it better than I thought.
Awesome little tractor
I told you that it would pull it in second gear, that's the same plow I pulled with our A, back when I was 12 and 13 years old.
Did extremely well
Great video but the mirror or reversed image at the 5:30 and 7:00 marks show you sitting on the left side is just wrong.
I have a Cub, a H and a SM. Now you’re making me want an A. Look what you did!
Hahaha it is definitely contagious
Very impressed with the A
I had to bring out one of my old standbys today and out it to work since i am down a machine and no idea when it will get back up and running making the old 1086 sing lol
I saw, but comments were turned off
Shallow plowing, like grandad always hollered at me, "put that plow in the ground and why is it crooked?" 😆
Even at the end of the video?
Been waiting for this one
Wow! That a pulled that nice!
I knew it could do it! I noticed that the drawbar on the plow needs adjusting if you're going to run the A . It's set up for the H ,and the H is more suited for the #8 so leave it alone. If only you can find a two twelve bottom for the A ,you'd be set. 🧨
A 2 bottom Little Wonder
@@FarmallFanatic is that what they're called? I didn't know that.
Yep
Do you use a lead additive in your fuel?
Initially I did, I don't anymore
Good reminder for everyone to be careful. My wife lost a friend of hers a number of years ago. He was pulling a disk behind a tractor and it bounced him off the seat and onto the implement.
Wow 😯
Blew my mind , your plows are throwing dirt to the right but, your aerial shot shows it throwing to the left. Mirror image. Interestingly.
Didn't know if anyone would notice lol
little tractor does a good job
Add some rear wheel weight and you'd be golden. Had 2 140's (sold 'em) and what surprised me was the high fuel consumption. Suckers liked the go juice.
I have rear wheel weights on it
@@FarmallFanatic more....
Have to load the tires
Did you wind up scoring that 130?
Fftgusvis my favorite video of yours takes me back to my childhood
She's moving in second gear 😲💥
Perfect gear
@@FarmallFanatic sure is!
I can’t believe that it did it, not only did it but did it surprisingly well 👍 boom! Also the wife told me a tractor show today that she likes and wants a cub. I married a good woman lol
That cub with the sickle mower was nice
Did fine,sounds great doing it
Sure is chuggin along just fine! BOOM
They always looked odd to me how the clutch and brakes were on the same side , I saw a few of them back in the day but mostly saw the H and M and they were always tricycle front ends .I wonder if horsepower comparison with newer tractors VS old is accurate, in as much is a new 60 Hp tractor really 50% more powerful than an old 40 HP tractor.
New hp doesn't stand a chance to old hp
Is it just me, or does the A pull a plow better than a C? Smaller tires?
this particular A has loaded tires and wheel weights
@@FarmallFanatic we have a 230 with loaded tires and wheel weights. Probably just our heavy clay soil, but it never plowed worth a nickel. 2nd gear was usually out if the question and first just doesn't do the job so well. May also be setup...it is a fast hitch 2 bottom tractor mounted plow. That tractor came out with a crude draft control, but it is long gone now. Rare to see teledepth on one anymore.
Go little red go! 😊👍👍
Is there a difference in horsepower between A and Super A?
Don't forget there are two different series of Super A's. The early Super A's had the C113 with provision to drive the hydraulic pump from the A with no water pump. The later Super A's have a C123 which has a belt driven water pump. That version of the C123 was used last on the 130's. The 140's have a newer version of the C123 with some updates, the water pump is placed higher and also runs the fan, by doing this they were able to eliminate one belt off the front of the engine.
You're really talking on average about 2 horsepower more with the super
Its doing the job...
Part 3 , must be
Farmall💪♥️
DISC'ing with the A ?????????????? ;) you DISC after plowing right??? lol see if that thing pulls that new 12 foooter disc??? ;)
Turnin dirt. Beep beep 😂👍🍻
2nd gear worked great👍
Do you have any hay equipment
No
@@FarmallFanatic oh ok
@@AntiGovernmentAction getting into hay is very expensive and the people you have to deal with to sell it don't understand that fact
@@FarmallFanatic true
awesome.
I am wanting to see it pulling that smaller wheel disc, if it doesn't need hydraulics to raise/lower it.
Hmm 🤔
Is that plow a 16 inch
Yes
Nice A...red power
Boom 💥
That’s the only tractor I want outside of an Oliver
Powerful little machines if you set them up correctly
Let's go let's grow
💥Boom💥
Need yo move your draw bar over one or two holes to the left yo get the fur wheel in the fur right.
Correct
👍👍
😎👍
All that there plowing does is get me itchy to be out there too...