Yesssir, let’s do this. I don’t even have a tundra , or a VW or what ever it was in your last video, but still watch every video In hope of learning some of this ‘quantum physics’ that you guys call car audio engineering or whatever it is. I have never ran into such difficulty trying to learn a new diy ‘skill’ ever in my life until I tried to learn audio shit. It’s like a trying to learn calculus but everything is written in some foreign language… its so difficult that it’s even hard to explain… lol.
So i wired up my sub and just gave it power and ground, then ran a wire from one of my speakers to the amp as signal wires and they work great, any reason why someone would do all this complicated stuff instead what i did, genuinely curious, cuz other than running power, my way is free and takes like 5 minutes, if that
Being a UA-camr myself, i tread light when commenting on someones page. I love your videos by the way, but the only thing that stumps me on this is how do you wire the line out converter from harness from the 4 channel build. I have looked at the two videos 5 or more times just making sure I didn’t miss it. When you finish the 4 channel video everything is button up, no lose wire. So how do you have a whole end of a 9 conductor with nothing on it coming from the harness. I hope I’m making Sense..
I’m having a hard time finding T-harness for a 2018 Tundra crew max, non-JBL with center speaker. Needed for sub amp and DSP/4ch. Amp. Any info would be greatly appreciated.
Hello, i was wondering how you wired the subs in the box? Are they four ohm wired to 2 ohm? Series? Parallel? I bought all the same equipent for my tundra and you didnt cover installing the subs in the box. Thanks.
So video seems great but the t harness you say you build for the line out converter is nice but kinda new and would love some instruction on how to BUILD THE HARNESS. It is a step that was left out of this video and seems to me to be the most difficult part to this process.
How do you wire up a stereo harness for a sub amp without an amp for the door speakers? Do you have a video showing "dumbed down directions to do that?
Thanks I found the video i was loo at your website and it say that y’all can prepare the harness for $49.99 …and another question if I get a Tesla edition radio do I still need a harness to connect an amp with subwoofers ?
Hey bro I've been trying to get ahold of you. I burnt a voice coil on my 15 inch I think and I'm ordering a skar sdr 15 to replace it and need your help. Did you change your number?
Because this isn't showcasing the equipment used, rather showing you the technique on how to install the equipment themselves. You can't possible expect to get a great audio experience as a test over youtube quality, do you?
Parts used linked in the description of the video!
Is there anywhere else I can get the subwoofer box?
Where is the link for the sound Matt?
Yesssir, let’s do this.
I don’t even have a tundra , or a VW or what ever it was in your last video, but still watch every video In hope of learning some of this ‘quantum physics’ that you guys call car audio engineering or whatever it is. I have never ran into such difficulty trying to learn a new diy ‘skill’ ever in my life until I tried to learn audio shit. It’s like a trying to learn calculus but everything is written in some foreign language… its so difficult that it’s even hard to explain… lol.
How do I tap into the jbl amp under the passenger seat ? Thanks
I really love how u guys did this .
I wanna do the same but I have jbl system
What is the best sub box and subs to use in this truck. Simply what to use for the most bass output but sounds great music.
So i wired up my sub and just gave it power and ground, then ran a wire from one of my speakers to the amp as signal wires and they work great, any reason why someone would do all this complicated stuff instead what i did, genuinely curious, cuz other than running power, my way is free and takes like 5 minutes, if that
Being a UA-camr myself, i tread light when commenting on someones page. I love your videos by the way, but the only thing that stumps me on this is how do you wire the line out converter from harness from the 4 channel build. I have looked at the two videos 5 or more times just making sure I didn’t miss it. When you finish the 4 channel video everything is button up, no lose wire. So how do you have a whole end of a 9 conductor with nothing on it coming from the harness. I hope I’m making Sense..
Send me a message on facebook and we can assist further with your questions.
Where did the t harness come from
I was just wondering if this speaker box will fit a 2019 Toyota tundra?
Two 12Tw3 or one 13.5TW5 ?
Very nice set up , I want to ask can you give me link for am bracket
how long did it take to installed i jus order 2 10's scar audio 😊😊
I’m having a hard time finding T-harness for a 2018 Tundra crew max, non-JBL with center speaker. Needed for sub amp and DSP/4ch. Amp. Any info would be greatly appreciated.
Hello, i was wondering how you wired the subs in the box? Are they four ohm wired to 2 ohm? Series? Parallel? I bought all the same equipent for my tundra and you didnt cover installing the subs in the box. Thanks.
So video seems great but the t harness you say you build for the line out converter is nice but kinda new and would love some instruction on how to BUILD THE HARNESS. It is a step that was left out of this video and seems to me to be the most difficult part to this process.
See the 4 channel amplifier install video, we walk you though the entire process. Link in description of the video.
But how does it sound though
Do you recommend a capacitor?
What would a good price be for a quality set up?
Parts are linked in the description for what we did. Prices vary on brand, power, and quality.
Will this box fit a 2005 silverado 1500 crew cab? Its hard asf to find a box that fits
How do you wire up a stereo harness for a sub amp without an amp for the door speakers? Do you have a video showing "dumbed down directions to do that?
I have one in linked in the description if you want one already made by yours truly!
Good video can you do or have a video installing an aftermarket stereo with the same amp and subwoofers on a 2018 tundra crew max?
We already have a radio install, linked in description. Same process, minus the line out converter.
Thanks I found the video i was loo at your website and it say that y’all can prepare the harness for $49.99 …and another question if I get a Tesla edition radio do I still need a harness to connect an amp with subwoofers ?
Have you installed this box in a 2020? The link to the box shows 14-18
fantastic video, thanks so much! Liked and subscribed
How much cost all that ? Have a 2014 Toyota Tundra and I’m
Looking for something like that
Everything is linked in the description
Is There Any Where Else I can get the subwoofer box it’s unavailable at Amazon
It says its not compatible for jbl system the plug n play harness. What should i get? Because i have jbl system already🤦🏻♂️
Have you found what harness to get for JBL?
Does the 2007 tundra stock head unit no navigation have a plug for an amp?
No but we can build one for you. Send us a message on Facebook if interested.
I just bought a 3 way components for my 2021 tundra, my main concern is where can I put my 3" mid ?
Without any custom fabrication, hard to say without seeing them in person. You could drill and flush mount them in the door panel, or in the A-pillar.
I just want to add another sub and amp to the jbl system in my tundra. How do I do that?
Have you found what harness to get?
@@Jimbeamlahey no. Please explain
Very good video, but the nonstop drop down comments at the top quickly became very distracting. No disrespect intended.
What do I use if I did have jbl speakers cause I do have a trd pro
Same do you know what harness to get?
I have a 2018 platinum with JBL. I want to ad an amp and subs. Could you link to me the harness for this application please?
Have you figured out what harness to get for JBL system? Not sure what harness to get either
Harness in the link below is not fit for 2021 SR5 Non JBL
Did you ever find one? Trying to figure this part out for myself. Thanks!
@@dlseverns same here have you found out
Hey bro I've been trying to get ahold of you. I burnt a voice coil on my 15 inch I think and I'm ordering a skar sdr 15 to replace it and need your help. Did you change your number?
Great video
10s or 12s??
These are 12's
@@ProvoBeastAudioLink for the sub enclosure?
I'd use 90° turns on those RCA connectors!
Hello I have a tundra trd pro with jbl I was wondering can I just by a dsr1 my two channel amp an my subs 12 inch wanna keep factory radio
Sure, you can keep the factory radio, add a line out converter or signal processor, and install an amp and sub.
I don’t understand why you show the entire installation and don’t show how it sounds (the ending result of the installation)
Because this isn't showcasing the equipment used, rather showing you the technique on how to install the equipment themselves. You can't possible expect to get a great audio experience as a test over youtube quality, do you?
@@ProvoBeastAudio 🤣🤣🤣. Great video! Keep it up