All those supplies can be bought for less at Walmart. But of course you'll need cash or a credit card. Also, I found those four inch roller covers to be quite expensive. So I started cutting the cheap 8 inch roller covers in half and found they work just as well for a lot less money. 😊
I like a 5 gallon bucket and a roller screen to roll out of. Much easier to move around. We buy 9 inch rollers cut them to 4 when needed. Two 4 out if a nine inch . At least 1/2 nap concrete to 3/4 nap on asphalt, holds plenty of paint. 1 inch nap kinda over kill and starts to get messy. The finance on a 3400 is usually done on just a few months, 6 if I remember correctly so pretty high monthly payment.
Paint .. we’ve financed machines at SW on a “job 1” account without losing the ability to charge paint on the main account… for us 1 had nothing to do with the other .. only saying that this was my experience.. and they have our price in the system for the paint to be the same price even if I pay cash
So paint do you recommend for a spraying parking lots? The stuff we have been getting seems to “chalky” and picks up all the tire marks within the first day or two.
Hey man my name is Vincent and if from cali. I’m interested in this business it looks like a good career/ side hustle. How would you say business has been for you and how has your experience been so far?
Good afternoon, Is it possible to be successful only doing striping, or are most local businesses looking to get fresh seal coating and striping done in one shot? I’d love to get into striping, but I don’t get excited about the asphalt/seal coating side of things.
Using a paint roller is much more difficult than a spray-type striping machine, especially when the pavement is in less than pristine condition. I have restriped a parkinglot that had loose stones in the surface of the asphalt, and the stones would stick to the wet paint roller and go around with the roller, making it very rough and difficult to paint a straight line and to get the paint evenly applied. I had to frequently clean the roller, without getting paint where it didn’t belong. I would never recommend a roller in place of a high-pressure striping machine, except as a stop-gap measure to be replaced by a machine as soon as possible.
🚧 How To Stripe Course : bit.ly/HOWtoStripe
🚨 𝐒𝐀𝐕𝐄 𝟓𝟎% on 𝙌𝙪𝙤𝙩𝙚𝙄𝙌 👉 myquoteiq.com
Thanks for the collab Bro.
All those supplies can be bought for less at Walmart.
But of course you'll need cash or a credit card.
Also, I found those four inch roller covers to be quite expensive. So I started cutting the cheap 8 inch roller covers in half and found they work just as well for a lot less money. 😊
And I bet you drive 30 minutes across town to save a penny per gallon gas. Maybe just raise your price to cover your costs.
The collab we didn't even know we needed!
Always with the W
This was awesome!
Paint
I like a 5 gallon bucket and a roller screen to roll out of. Much easier to move around. We buy 9 inch rollers cut them to 4 when needed. Two 4 out if a nine inch . At least 1/2 nap concrete to 3/4 nap on asphalt, holds plenty of paint. 1 inch nap kinda over kill and starts to get messy.
The finance on a 3400 is usually done on just a few months, 6 if I remember correctly so pretty high monthly payment.
Like this work, any license I can get.
And how much is calculated. By the hour
Paint .. we’ve financed machines at SW on a “job 1” account without losing the ability to charge paint on the main account… for us 1 had nothing to do with the other .. only saying that this was my experience.. and they have our price in the system for the paint to be the same price even if I pay cash
How many tapes are spent at big job like this?
So paint do you recommend for a spraying parking lots? The stuff we have been getting seems to “chalky” and picks up all the tire marks within the first day or two.
Hey man my name is Vincent and if from cali. I’m interested in this business it looks like a good career/ side hustle. How would you say business has been for you and how has your experience been so far?
Good afternoon,
Is it possible to be successful only doing striping, or are most local businesses looking to get fresh seal coating and striping done in one shot?
I’d love to get into striping, but I don’t get excited about the asphalt/seal coating side of things.
You can do parking lot striping as a stand-alone business, definitely.
I see a lot of parking lots that never get sealcoated but are restriped as needed. There’s definitely use for a striping-only business.
Awesome!
Chris is gold.
Paint
Paint!!
Paint!
Set up a roller with a paint pump on wheels.
Similar to what is used inside homes.
Much simpler and cheaper than the tractors.
Using a paint roller is much more difficult than a spray-type striping machine, especially when the pavement is in less than pristine condition. I have restriped a parkinglot that had loose stones in the surface of the asphalt, and the stones would stick to the wet paint roller and go around with the roller, making it very rough and difficult to paint a straight line and to get the paint evenly applied. I had to frequently clean the roller, without getting paint where it didn’t belong. I would never recommend a roller in place of a high-pressure striping machine, except as a stop-gap measure to be replaced by a machine as soon as possible.
PAINT
They using ur biz info but doing net 30 with ur credit no thank you
Question what license do I need to start parking lot stripping
none
depends on state
Paint
Dammm
Business credit or personal credit?
#Paint
Most likely he got a net -30 60/or 90 account line of credit for his business a lot of companies offer them but they don’t advertise them
Personal. You won’t have any business credit established if it’s a new entity so you’ll more than likely have to guarantee it.
PAINT