How to Build a Foundation
Вставка
- Опубліковано 8 вер 2024
- How to build a foundation
Once we have approved the project can begin to build. In our case, the soil is fine sand and freezes in our region of 90 cm.
Foundation will consist of 50x30 foot and 30X 1m part above it.
When a Measure axes begin digging with a mini-excavator 1m 10 cm.
Mayor of depth with levellers. + Must be added crushed stone thickness.
Crushed stone and tamping , check levels.
We start the next stage. Form for foot in Correct level. It will be reinforced with concrete and use. We will make reinforcing elements of 12 mm of steel. They can be folded in a special way. We are fix them . Folded with a pipe. In use foot metal fittings 12mm 4 pieces. Mutually bind with the steel wire. Struts is precisely the axles.
We start concreting. Concrete is fed precisely in place. Form is filled. After 2 days we remove the formwork edges and pouring sand.
Brought the ordered molds. 2-3 days assemble molds. Check level.
communication sites are putting a plastic shell. Cables, sewerage and water pipe. Metal rods must not touch the edges of the mold. By placing plastic spacers. We start fill with concrete B-20 is supplied with a pump exactly the casting site. Concrete is vibrate and settle. We are supplementing the shortfall. After 2 days you can remove molds. Fresh concrete is watered and protected from sunlight. An integrated drainage outlet. Sewer or water pipe outlet between rooms. We continue to water several times a day and keep away from the sun Cover. Possible to use plastic covers.
After 3 days of watering can be interrupted.
Once the Foundation of dried sizing on the outside thermal insulation boards. After a day can begin backfilling
Next topic - foundations for construction - first part.
• How to waterproof foun...
other related topic of measuring tape:
• MEASURING TAPE TRICKS
• How to Create a Perfec...
tile joints and corners : • Tile joints and Corners
abut tilling : • Tile A Wall - start, h...
some creative ideas: • Underfloor heating - l...
the best material for home construction: • the best material for ...
How to start building a House
• Corner hack & the fir...
Thank you so much for posting and creating this video! I am not presently building a home, but hope to in the future, and was always curious about how a foundation was setup. This was super helpful and appreciated!
Thank you, very informative I think I will use this approach to build my own.
thanks for very important engineering info
In my opinion the dirt soil the land get concrete over the land and it make it solid for the house to be put over it.
The more I watch it done with molds, the more I like the mold idea.
ok thanks
As opposed to pouring the concrete into a hole or your self-made forms?
I rent forms.
Awesome, thanks!
thanks
Great presentation
Awesome
thanks
спасибо за видео. Скажите, в Канаде, в частности в Альберте, устанавливают деревянные бруски сверху с обоих сторон фундамента. В штатах устанавливают шпильки с резьбой с шагом. Я так понимаю для крепления стен. Со шпильками понятно, а вот как устанавливают бруски в бетон? Как они держатся? И что это за бруски? Со специальной обработкой. буду признателен за ответ
yes somtime
@@marisbuildsahouse4304 а поподробней
začem bruski v beton? onu gnejut , eto palsmasavije vstavki dlja špļek. Derevo s betonom nedružit nado atdelat hidroizolacija 2 sloja ruberoid. Ličse spilki s rezboi.
@@marisbuildsahouse4304 ну я думал вы знаете. В Альберте так делают. Слыхал, что эти бруски с какой то пропиткой и они не гниют. Все дома так строят. Для меня конечно логичнее шпильки, кстати, я сарайчик так и построил, но вот по коду идут бруски
ua-cam.com/video/SzfHDm16IHk/v-deo.html
spilki
is this top down or bottom up???
view angle from top to bottom
Nice I have some foundation videos on my real estate flipping channle
varētu arī latviski?
skatīt tulkojuma valodu translations -latviski