Hi, thanks for sharing. For the UK purposes however, you should build a wall with visible lintel above the windows, as any opening requires support and the weight should not sit on the window frame (Building Regulations Part A and BS EN 845 - 2 : 2003). There may be metal lintel above the window but it is not visible in the video. This will prevent cracks running from the corners of the windows sooner or later...
in germany you put a ringanker above the window (actually around the entire building at this level) It is made of U shaped AAC blocks which you then build rebar frame inside and then fill with concrete. super strong. normally german windows have built in rolladen for security and sun protection in summer. see www.ais-online.de/media/65665/images/17119859px957x636.jpg
This is just one way to build. This material has a good thermal resistance, it is good thermo mass, easy to process. In the winter, the house is warm and cool in the summer. The material will be obtained in a special industrial process - autoclaved aerated concrete. A lot of sealed air bubbles in the wall.
this is in Europ- aerock, yotng,H+H. in Us look for "Autoclaved Aerated Concrete (AAC) " www.hebel-usa.com/en/docs/flash/3_Masonry_Components.pdf accurately blocks Sticking with glue
Maris Builds a House Thank you for the reply. I have seen Ytong, Btong (Vietnam) AEROC ( Russia) Texoblock.lv, Roclite, etc. Awesome sustenance!! And Xtella that did make them in the US, pulled out a few years ago. There is just too much opposition from banking, insurance, building industries to allow familes to live in houses that are fireproof, safe, and inexpensive. Bummee....
Maris Builds a House LOL. I mentioned Xella and that was the pdf you gave. I will try to contact them, but I heard they left the US market. Maybe they made the Ytong line and drooped it, dunno. Thanks again.
I use a special adhesive, which can be put 1-2mm, because the blocks are very precise. Bauroc EASYFIX PU-glue is a one-component polyurethane glue for building non -load bearing walls from bauroc partition wall plates or bauroc blocks. is suitable for use as an alternative to mineral THIN. JOINT MORTAR. The advantages of bauroc EASYFIX are cleaner and more convenient work and a faster speed.
is expensive as a cement mortar, but with glue it will work more easily and we will get an ideal thermo isolation. if you buy ready-made cement mortar bags then do not stick with glue more expensive. with glue consumption 1-2mm - 25 kg bag 6.5 euros
400 kg / m³, can be built on 2.5 floors and 2.5 N / mm2. Comparative soft and porous material with closed air cells. Different density, hardness variants are possible.
한국이랑 차이는 있지만 좋은 영상 잘보았습니다 감사합니다
good afternoon,
I will not advertised blocks and not doing the distribution, I just show technology, which applied, thanks for watching. good luck.
Hi, thanks for sharing. For the UK purposes however, you should build a wall with visible lintel above the windows, as any opening requires support and the weight should not sit on the window frame (Building Regulations Part A and BS EN 845 - 2 : 2003). There may be metal lintel above the window but it is not visible in the video. This will prevent cracks running from the corners of the windows sooner or later...
in germany you put a ringanker above the window (actually around the entire building at this level) It is made of U shaped AAC blocks which you then build rebar frame inside and then fill with concrete. super strong. normally german windows have built in rolladen for security and sun protection in summer. see www.ais-online.de/media/65665/images/17119859px957x636.jpg
Nice work!!👍😁
This is awesome! Thank you!
thanks
what is your opinion on clc compared to aac? have you built in clc? thanks
?? not
Awesome build! 👍
Good job
Why do you make blpcks, why not cast an entire wall in place?
This is just one way to build. This material has a good thermal resistance, it is good thermo mass, easy to process. In the winter, the house is warm and cool in the summer. The material will be obtained in a special industrial process - autoclaved aerated concrete. A lot of sealed air bubbles in the wall.
You keep saying that you use glue but I don't see any glue is this a language barrier or I just missed it thanks again love your work
factory dry bag 25 kg + water = ready-made adhesive --"Aerated concrete adhesive"
In the US it's called thinset mortar. Glue comes from bones and hides.
The molds , good molds like those are the key! They are what I'm missing. Do you sell molds?
I rent for a week and it's not expensive
What is the cost of those blocks?
50 Eur/ m3
What country are you in and can those texoblocks be shipping to the US? Do you know if they sell molds for them?
this is in Europ- aerock, yotng,H+H.
in Us look for "Autoclaved Aerated Concrete (AAC) " www.hebel-usa.com/en/docs/flash/3_Masonry_Components.pdf
accurately blocks Sticking with glue
Maris Builds a House
Thank you for the reply.
I have seen Ytong, Btong (Vietnam) AEROC ( Russia)
Texoblock.lv, Roclite, etc.
Awesome sustenance!!
And Xtella that did make them in the US, pulled out a few years ago.
There is just too much opposition from banking, insurance, building industries to allow familes to live in houses that are fireproof, safe, and inexpensive. Bummee....
Maris Builds a House
LOL.
I mentioned Xella and that was the pdf you gave.
I will try to contact them, but I heard they left the US market. Maybe they made the Ytong line and drooped it, dunno. Thanks again.
do you use ordinary cement mortar, or something else?
I use a special adhesive, which can be put 1-2mm, because the blocks are very precise.
Bauroc EASYFIX PU-glue is a one-component polyurethane glue for building non -load bearing walls from bauroc partition wall plates or bauroc blocks. is suitable for use as an alternative to mineral THIN. JOINT MORTAR. The advantages of bauroc EASYFIX are cleaner and more convenient work and a faster speed.
So I'm hearing that you use the adhesive because it is thinner and easier to use than mortar. Probably more expensive, though?
is expensive as a cement mortar, but with glue it will work more easily and we will get an ideal thermo isolation. if you buy ready-made cement mortar bags then do not stick with glue more expensive. with glue consumption 1-2mm - 25 kg bag 6.5 euros
PSI?
Nothing in this video matters without knowing what the PSI is of the concrete you are using.
400 kg / m³, can be built on 2.5 floors and 2.5 N / mm2. Comparative soft and porous material with closed air cells. Different density, hardness variants are possible.
well don
renars67, KILLER_XD p
Terrible Video Production