How to Replace Valve Cover 2013-2018 Hyundai Santa Fe
Вставка
- Опубліковано 7 вер 2024
- Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ie/1AEV...
This video shows you how to install a new valve cover from TRQ on your 2013-2018 Hyundai Santa Fe. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.
Estimated installation time for a professional technician is approximately: 1 hour 24 minutes
This repair was done on a 2016 Hyundai Santa Fe Sport Base 2.4L Sport Utility 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Hyundai Santa Fe Sport
2014 Hyundai Santa Fe Sport
2015 Hyundai Santa Fe Sport
2016 Hyundai Santa Fe Sport
2017 Hyundai Santa Fe Sport
2018 Hyundai Santa Fe Sport
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obJZ/1A...
• Pocket Screwdriver
• 16mm Wrench
• 19mm Wrench 1aau.to/oafX/1A...
• 10mm Socket 1aau.to/obMH/1A...
• 12mm Socket 1aau.to/oced/1A...
• Trim Tool Set 1aau.to/oaBr/1A...
• Needle nose pliers 1aau.to/oJz/1AX...
• Needle nose pliers 1aau.to/oJz/1AX...
• Ratchet 1aau.to/ocfb/1A...
• Socket Extensions 1aau.to/oced/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oRB/1AX...
• Gloves 1aau.to/obhi/1A...
• RTV
• Safety Glasses
• Razor Blade / Gasket Scraper
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is by far the most comprehensive video on the job for this model vehicle. No one has fully explained how to get that one bolt on the far right of the valve cover until now. I can’t wait to do this for my daughter’s 2013 Santa Fe 2.0T.
Three questions:
1.) Did you depressurize the fuel system off camera?
2.) Why not replace the o-ring on the high pressure fuel pump?
3.) Why must that metal fuel line be replaced? I’ve seen other videos simply tighten the original one back on.
Can you please fix my intake gasket on my Sants Fe? You did that like a pro... effortless..😊