I just used this combo for first time on a car I did some spot wetsanding along with some hammered panels and correction was the highest I have ever achieved. I was very impressed
That Ram's paint looked like it was wet when you showed what it looked like in the sun💦🌞 You were in geek out mode at the end when you were talking about them🤓 Great job Brian👍🏼✌🏼
Amazing results, well done. Used the KC products a few times already, as at this side of the pond, it is widely available, however we barely get any US products, due to high shipping costs and taxes. So far all the KC products are very good, that I tried. It is a German brand. I think the cut-out on the pads is ether something to do with the heat, or the strength of the pad. They have that heavy cut (the one in the "red" bottle), which cuts through real deep scratches and swirls. They also have a rather good APC, called Green Star. Also their Eulex is great for tree sap and such. Plus the FSE, for a quick finish and waterspot removal.Also for the engine bay, after you cleaned it, go for the Motorplast (MP). You can find videos of some of those over my channel.
Looks impressive. Can't wait to try some. I have a request concerning "Old Glory" The previous footage you had at your old house gave you that clang, clang audio as the flag hit the pole. That was so cool, especially when you sit there and watch her wave in the wind. Could you put that audio on there again? Proud to be an American!!
I really like companies like this one that helps to determine which pads to use with which products. I feel like it gets confusing sometimes with so many different pads out there with so many different products you don't know what combo works best together without spending a bunch of money on pads just to see what will work. Thanks again for the great content
Koch Chemie, great German brand that I love. No only polish but their gentle snow foam GsF, motorplast engine bay spay, greenstar Gs all purpose cleaner. All very good. Yes, the Germans still make good products (like e.g. Sonax). Get yourself a gloss meter Brian ;-)
I plan to buy many more of their products at the event this week. I have heard great things about German Detailing companies so I am excited to get to try them. Yes I need a gloss meter for sure.
Thank you sir for making this video. You're enthusiasm and excitement is contagious. I have bought the F6 to try and revive my paintwork and have trawled through loads of videos looking for a review. You explained everything clearly and the results speak for themselves, it's given me a little more confidence that I've bought a good product and will get the results I'm after. As I'm on the other side of the pond 🇬🇧 some of the products you review aren't available to us but please keep up the good work as your video has certainly helped me 👏👏👍👍
I called and called and called. I didn’t give up. One of my local car wash suppliers will get me a gallon of the Malco SAP you recommend. Honestly, Malco and Koch Chemie should start sending checks. This is One of my favorite channels on UA-cam. You are our version of John from Great Britain, except I like your content a bit better.
Just noticed your video as I was thinking of buying some KC. I have a good feeling to buy them now that I see how well it works. The truck looks awesome,
I'm going to try the micro cut on my C5. I'm hoping for a better shine on my silver paint. Corvettes have a hard clear coat but I don't have much imperfections. Great video.
Been using that stuff for years here in Norway. Great products. Their soaps and prewash, wheel cleaners and ironremovers are fantastic. And very cheep over here compared with most others becouse of big quantums (5-10 liter containers). My favoritt brand with Scholl Concepts (also german brand) and carpro. Probably the best plastic renewer on the market is Koch Chemie PSS (very durable) Nice video btw ;)
Amazing results! One question: do you recommend buying the Micro cut? Someone advised us to get the Red (Heavy Cut) and Yellow (Fine cut). But not the Micro Cut one. Seeing this do you recommend getting it just for the last 5%? Does it do enough with a finishing pad to buy it?
Great turnaround! I have heard goods things about KC. I will get some of that for the spring cleanup. Great vid man! Do you know if they are sun friendly?
Hello. Please do reply. love your videos. I am an amateur in car detailing world but planning to open a new venture. Can you please recommend me some brands to be associated with to use and distribute their products? Asking this because people in my country are marketing their detailing business based upon the brands they use. Ive picked up a few. Let me know if there are others. G Techniq/Modesta/ Feynlab/Nasiol/ ColornDrive. And what are brands like Adams, 303, turtle wax? Do these also provide complete ceramic coating ranges like the ones i mentioned? Also, brands like Carpro, Gyeon, IGL, Meguiars, Chemical Guys are already available in my country. Want something other than these and good.
It hurts to see you use the Malco SAP knowing I’ll never have access to it. Anything similar out in the market of similar value and as effective at removing contaminants that you’d recommend?
I think these are just as good if not a little better then the Griots Correcting Cream and Perfecting cream. The heavy cut Koch Chemie isn’t nearly as good as Griots Fast Correcting Cream though.
Really amazing detail! Gloss is off the charts. I played around with KC with the H9.01 and M3.02 on some panels, for me testing is expensive at $60/L, and $13/pad. How would you compare this to Griot's Boss System. Do you think the price for possible extra performance is justifiable. The results are great.
In some cases yes, the pads don’t need to be that high but it was worse last year. They were $19.00 a pad. So a lot more expensive , you can also get other pads that’ll do the job. Others compounds that are comparable JesCar’s compounds , the Xtreme Solutions 503 Dynamic cut , the Griots compounds all can do the same. I have the Griots and in some cases on some paints you won’t need this much cut. Fab does a great job on the truck as well.
These are just as good if not better for the BOSS creams in the same category like Correcting Cream and Perfecting Cream. BOSS Fast Correcting Cream is better then the Koch Chemie heavy cut product though. I can’t remember the name but it’s a red bottle.
@@FABAutomotiveDetailing just what I was wanting to know! I was wondering about that. With my business I've been wanting to use something more "professional" or just plain different than other detailers are doing in my area. I use all of Sonax's line, but still come back to the BOSS system as its just great and finishing capabilities are unmatched
That was some gloss on the paint it looks like a different truck, did you say it was pantastic, or fantastic 😂😂😂😂 a joking aside you did a good job 👍👍👍
@@catguy64 🤣🤣 Unfortunately no. I was on a conference call with my boss filling out employee evaluation and wasn't able to watch from my cellphone like I always do.🤣🤣🤣 To risky for me to be around because I am diabetic. I only go to the hospital because I have a 3M versaflow PPE thanks to one of my cousins who is an anesthesiologist and was able to provide it for me.
@@catguy64 🤣🤣🤣🤣🤣Sorry brother man, facts of my life and health. I have been diabetic since 1987 when I was on my second year at the university of Puerto Rico.
I just used this combo for first time on a car I did some spot wetsanding along with some hammered panels and correction was the highest I have ever achieved. I was very impressed
That Ram's paint looked like it was wet when you showed what it looked like in the sun💦🌞 You were in geek out mode at the end when you were talking about them🤓 Great job Brian👍🏼✌🏼
I know it was a total transformation of the paint. Wait until you see the entire detail of it. The paint was hammered. Thanks brother
Wow! That is off the charts with the end results. And yes that would be super cool to get a gloss meter. Great vid man
Thank you! Gloss meter would be cool to have.
Amazing results, well done. Used the KC products a few times already, as at this side of the pond, it is widely available, however we barely get any US products, due to high shipping costs and taxes. So far all the KC products are very good, that I tried. It is a German brand. I think the cut-out on the pads is ether something to do with the heat, or the strength of the pad. They have that heavy cut (the one in the "red" bottle), which cuts through real deep scratches and swirls. They also have a rather good APC, called Green Star. Also their Eulex is great for tree sap and such. Plus the FSE, for a quick finish and waterspot removal.Also for the engine bay, after you cleaned it, go for the Motorplast (MP). You can find videos of some of those over my channel.
Thanks I can’t wait to try the rest of their products. Hoping to bring more products home this week after the USA launch I am attending on Tuesday.
Looks impressive. Can't wait to try some. I have a request concerning "Old Glory" The previous footage you had at your old house gave you that clang, clang audio as the flag hit the pole. That was so cool, especially when you sit there and watch her wave in the wind. Could you put that audio on there again?
Proud to be an American!!
I really like companies like this one that helps to determine which pads to use with which products. I feel like it gets confusing sometimes with so many different pads out there with so many different products you don't know what combo works best together without spending a bunch of money on pads just to see what will work. Thanks again for the great content
I agree they made it really easy. Pads are a bit pricey but man do they work great. You are welcome
Agreed. I've used M302 and it was very good. They say when used alone that it doesn't remove very much clearcoat. Good video!
Yes it is a finishing cut which doesn’t remove much clear. Thank you
Man!!! That thing turned out phenomenal.. awesome job! I really hope to try out the Koch lineup! I can hear your geek out mode 😄😄 great work brother!
Papa your going to need a really nice blanket and a whole other shelf system!
@@jaykid007 😂😂😂 already planning an add on loft 🤣
@@PapaSmurf918Detail 😂😂😂
Thanks brother you would love these products. Geek out mode in full swing.
@@FABAutomotiveDetailing today I received my Motorplast from Koch Chemie
Koch Chemie, great German brand that I love. No only polish but their gentle snow foam GsF, motorplast engine bay spay, greenstar Gs all purpose cleaner. All very good. Yes, the Germans still make good products (like e.g. Sonax). Get yourself a gloss meter Brian ;-)
I plan to buy many more of their products at the event this week. I have heard great things about German Detailing companies so I am excited to get to try them. Yes I need a gloss meter for sure.
Man it was a pleasure meeting you!!!! Truly freaking awesome!!!!! God bless you and your business
It was great to meet you also man! Take care and keep doing what your doing!
Thank you sir for making this video. You're enthusiasm and excitement is contagious. I have bought the F6 to try and revive my paintwork and have trawled through loads of videos looking for a review. You explained everything clearly and the results speak for themselves, it's given me a little more confidence that I've bought a good product and will get the results I'm after. As I'm on the other side of the pond 🇬🇧 some of the products you review aren't available to us but please keep up the good work as your video has certainly helped me 👏👏👍👍
You are welcome! I’m just glad my video helps you out. Koch Chemie products are legit for sure.
That Malco SAP did an amazing job at removing oxidation. Very valid point you say it took off junk that would have ended up in your pad!
Amazing transformation! I agree with other comments that you should get a gloss meter. Your numbers would leave us speechless 😄
Thank you! I have been looking at them on Amazon and plan to buy one soon.
I’ve watched so many of your videos and I am always impressed. Liked and subscribed.
I called and called and called. I didn’t give up. One of my local car wash suppliers will get me a gallon of the Malco SAP you recommend. Honestly, Malco and Koch Chemie should start sending checks. This is One of my favorite channels on UA-cam. You are our version of John from Great Britain, except I like your content a bit better.
You know, the British dude from Forensic Detailing Channel.
Oh yeah I know John! I hung out with him for a few days in Arizona at the Turtle Wax event. He is hilarious.
Hey Brian, I have the products too but have not tried them out yet, now I cant wait too. Great shot of Old Glory in the reflection..!
You will love them! Thanks she looked good in this video!
Just noticed your video as I was thinking of buying some KC. I have a good feeling to buy them now that I see how well it works. The truck looks awesome,
Thank you glad I could help!
I'm going to try the micro cut on my C5. I'm hoping for a better shine on my silver paint. Corvettes have a hard clear coat but I don't have much imperfections. Great video.
Silver is a great color when clean. Thanks!
The truck looks great I believe their product is a high-end European product 👍👍
Thanks! Yes they are a German company but they launch here in the USA on Tuesday at the event I am going to near Atlanta.
Hmm, seen the products, but never gave them a true look. Now I just may have to purchase them! Plus those pads look great too! Nice job FAB!
They are worth buying for sure. Pads are a bit expensive but work awesome. Thanks man
Great insight and results! Going to try this on my next session 👍🏼🤩
Thank you!
I love their line up!! F6 and m302 is 🔥
Thanks I will have to try that combo!
Been using that stuff for years here in Norway. Great products. Their soaps and prewash, wheel cleaners and ironremovers are fantastic. And very cheep over here compared with most others becouse of big quantums (5-10 liter containers). My favoritt brand with Scholl Concepts (also german brand) and carpro. Probably the best plastic renewer on the market is Koch Chemie PSS (very durable) Nice video btw ;)
Thanks! I can’t wait to try more of their products.
Koch Chemie is not bad. I’m using the gentle snow foam from them and it’s pretty good.
Those products made that color pop!
Yes they did!
I’ve been using it along with some others as well, the JesCar Medium cut is also similar to this.
That’s good to hear I have never used a JesCar product.
12:30
"Old Glory waving in the wind as she should"
Absolutely! 🇺🇸
Amazing results Sir residue control looks minimal as well ✊🏻🇬🇧🇬🇧
Thank you! Yes they are great products.
Wow, that is user friendly baby. Good job. Thanks.
Yes it is! Thank you and you are welcome
Looks good! Keeping those Rams shiny!
Yes sir! Thank you!
Great video Brian i heard a lot of good things about them
Thank you
excellent result👍🏻
SOLD. Ordering now!
You will like them alot
That is an amazing turnaround on that paint! These products look like the real deal. What other products do you think you may review?
Thanks! I plan to try a lot more of their products. We leave for the event tomorrow so who knows what I will bring home.
Color coded .. sweet
Looks amazing sir!
Thanks!
What wax did you use after the polish?
Amazing results! One question: do you recommend buying the Micro cut?
Someone advised us to get the Red (Heavy Cut) and Yellow (Fine cut). But not the Micro Cut one. Seeing this do you recommend getting it just for the last 5%? Does it do enough with a finishing pad to buy it?
Great turnaround! I have heard goods things about KC. I will get some of that for the spring cleanup. Great vid man! Do you know if they are sun friendly?
Can you recommend a fine or micro cut polish to get a gloss finish on polyurethane on a guitar?
On point Fab , Dad going to Say What the !!???
What did you use to protect the finish ???
Thanks! I used the 303 Graphene Nano Spray Coating. This is the truck I used in that video.
Ditch the da use a rotary for better results
Hello. Please do reply. love your videos.
I am an amateur in car detailing world but planning to open a new venture. Can you please recommend me some brands to be associated with to use and distribute their products? Asking this because people in my country are marketing their detailing business based upon the brands they use. Ive picked up a few. Let me know if there are others. G Techniq/Modesta/ Feynlab/Nasiol/ ColornDrive. And what are brands like Adams, 303, turtle wax? Do these also provide complete ceramic coating ranges like the ones i mentioned? Also, brands like Carpro, Gyeon, IGL, Meguiars, Chemical Guys are already available in my country. Want something other than these and good.
Superb results, koch chemie have an excellent reputation. Curious to know what LSP you used? Hope you and the family are well.
Thanks! I’m having a brain fart what is LSP? We are great and hope you are also.
LSP means last stage protection, so which wax/sealant dis.you use?
@@philbloomer1 That’s what I thought it meant but wasn’t sure. This is the truck I used the 303 Graphene Nano Coating on if you remember that video.
Do you think you could use micro cut with a cutting pad for a 1 step prior to a coating? Thanks!!
If the paint is in good shape then yes.
It hurts to see you use the Malco SAP knowing I’ll never have access to it. Anything similar out in the market of similar value and as effective at removing contaminants that you’d recommend?
Unfortunately I don’t know of any other products on the market that do what SAP does to oxidation.
Nice! Do you have a spacer or washers on your backing plate?
Yes I have washers to keep it free spinning.
How would you compare these to griots compounds/polishes?
I think these are just as good if not a little better then the Griots Correcting Cream and Perfecting cream. The heavy cut Koch Chemie isn’t nearly as good as Griots Fast Correcting Cream though.
Great video bro, about to order them 😎
Thank you!
Really amazing detail! Gloss is off the charts. I played around with KC with the H9.01 and M3.02 on some panels, for me testing is expensive at $60/L, and $13/pad. How would you compare this to Griot's Boss System. Do you think the price for possible extra performance is justifiable. The results are great.
In some cases yes, the pads don’t need to be that high but it was worse last year. They were $19.00 a pad. So a lot more expensive , you can also get other pads that’ll do the job. Others compounds that are comparable JesCar’s compounds , the Xtreme Solutions 503 Dynamic cut , the Griots compounds all can do the same. I have the Griots and in some cases on some paints you won’t need this much cut. Fab does a great job on the truck as well.
Great job and video. How much product did you use please? I can get hold of 250 ml bottles and wondered how far it would go.
Take care mate.
Thank you! I have the small bottles and didn’t even use a 1/4 of it.
@@FABAutomotiveDetailing brilliant I’ll order a bottle and pad then 👍🏻
ph level wtf?? they are the cut and gloss levels dude
How do you clean these Koch chemise pads? Just picked up a few
You can use dawn dish soap and water and clean by hand then air dry.
Hey Brian. Can f6 or P6 be used as a paint enhancement or would the purple label be the one only
I would use the purple label as it’s more of a finishing polish for enhancements. F6 may be to aggressive for just an enhancement
@@FABAutomotiveDetailing thanks sir
I have the same hand movement as you and people say I go too fast, but then when they see the final product they drop their jaw
Yeah it’s all about the end result! Thanks for watching
top parabens..
Do you think this will work well on soft and hard clears?
Yes it will work great on both
Micro cut finishes very well on soft black paint. Fine cut will need to be followed up on soft black paint. They both will finish well on hard clear.
@@FABAutomotiveDetailing thanks man 👊🏼
The pads are priced the same as other foam pads.
I thought they were a little more but man they work awesome!
Compared to BOSS system, what you think?
These are just as good if not better for the BOSS creams in the same category like Correcting Cream and Perfecting Cream. BOSS Fast Correcting Cream is better then the Koch Chemie heavy cut product though. I can’t remember the name but it’s a red bottle.
@@FABAutomotiveDetailing just what I was wanting to know! I was wondering about that. With my business I've been wanting to use something more "professional" or just plain different than other detailers are doing in my area. I use all of Sonax's line, but still come back to the BOSS system as its just great and finishing capabilities are unmatched
@@jkroemer2685 The BOSS line is hard to step away from for sure. FCC is still my favorite heavy cut product.
@@FABAutomotiveDetailing yesssssir! Same here, I add a few dots of that and some secret sauce and it's unbelievable what it looks like lol 😄
That was some gloss on the paint it looks like a different truck, did you say it was pantastic, or fantastic 😂😂😂😂 a joking aside you did a good job 👍👍👍
Thanks! It was Paaaaaantastic! 😂
@@FABAutomotiveDetailing 😂😂😂😂That's what I thought
Koch chemie pads 👍👍👍
They are great pads
Humberto where you at?
Helping an old lady cross the street to be tested for Covid.
@@catguy64 🤣🤣 Unfortunately no. I was on a conference call with my boss filling out employee evaluation and wasn't able to watch from my cellphone like I always do.🤣🤣🤣
To risky for me to be around because I am diabetic. I only go to the hospital because I have a 3M versaflow PPE thanks to one of my cousins who is an anesthesiologist and was able to provide it for me.
@@1stfrompuertorico568 excuses excuses excuses. 🤣😂
@@catguy64 🤣🤣🤣🤣🤣Sorry brother man, facts of my life and health. I have been diabetic since 1987 when I was on my second year at the university of Puerto Rico.
@@catguy64 I was going to say...... that’s strange😂
4th from Puerto Rico 👍🇵🇷
Anybody remember Garanimals where kids could match up there own clothes? You can't go wrong with Koch Chemie just match it up. HOOF OUT!!!
Exactly they made it really simple!