Yep, I wish I had those Mickey Mantle and Hank Aaron and Moose Skowron and Whitey Ford baseball cards back in pristine condition like they were before they powered my bike. I even had a signed Babe Ruth card that I stupidly put a thumbtack through, then later lost. Genuine Babe Ruth signed in fountain pen. I don't care what it would be worth, I only care that I don't have it to pass along to my great grandson.
crazyeye1, All you have to do to make your engine sound like these is to blueprint it, port & polish the heads, install full-race roller cams, a GM 478A supercharger, custom headers and fuel it with nitromethane-alcohol. If you can't afford that, spring clothespin clip a couple of Bee Club Special playing cards to your bike. I'm sure the neighbour kids will be impressed, if you can ever get their attention off their video games.
All I can picture is stuart little in a greaser get-up with aviators on rippin around in one of those T-buckets with a big (little) V-8 and with a tiny Marlborough Red in his mouth lmfao
Those are some pretty cool engines. I'm amazed at the push rod four stroke engine because of how tiny they are. I used to build motorcycle drag bikes so I'm familiar with how they are made and to see engine's this small in amazing me.
That's a you tube thing, the creator gets little or no say in that. Plus it's going to get worse to the point you have to pay UA-cam just to be able to watch most content without 40% ads...
There’s really interesting story about allied efforts to counter the German radio-controlled bombs. The control signal wasn’t coded. It was (I think) just a simple A.M. transmission. So the allies tried pointing a dish with different frequencies at the bombs, and this is the part of the story that I forget. The solution turned out to be so simple that any ship with a radio could do it. That was the start of encryption.
Love the Rat Rod Brown pickup truck. Engine sounds awesome. Love to have a full scale one for a nice project I've been working on. All of these are very interesting and well made.
believe it or not, diesel engines were a thing in the early days of the flying model airplane hobby - this is years ago. Like when I was a kid getting in to control line and then R/C airplanes in the 70s, I would get these books on the subject from the local library and the diesel engines were already rather retro even then. My engines at the time were all 2-stroke glow plug with alcohol mixed with some nitro methane for fuel. Single cylinder was certainly easier to machine, cheaper, and basically more efficient at that scale. But I remember when multi-cylinder engines started to appear and they were really cool/exotic - and look at them now!
One thing you forgot to mention, was a wired control, where 2 wires connected to a handle ran to the left wing of a model airplane, often powered by a Cox .049 glow plug engine. You stood there, as the plane circled around you, and the handle allowed you to control the elevation of the plane, as you spun around, using the centripetal force to maintain tension on the wires. If you tipped the top of the handle towards you, the plane would pull up. if you tipped the handle the other way, the plane would nose down. They would typically fly from 3 to 5 minutes, at an approximate speed of about 35 MPH. Once out of fuel, you would gently glide the plane down, and that was the end of the flight. It's been so many years, I don't even know what that flight control system was even called. You could buy the whole plane as a kit, which included a small can of Cox Glow plug fuel, a D cell, and holder that was used for heating up the glow plug for starting, and, ofcourse, the plane, as well as the wire and control handle. The whole kit cost about $13.50 US, and they worked really well, once you learned how to get the engine started.
WOW ! Some of these engines sound delicious. Pity about the truck at the end, it's engine is completely obscured by images from the following videos, as if you'd need to see them twice; they're already in the margin.
I've seen Gary Conley's mini-V8s up close and talked to him for 15 or 20 minutes about how he makes them. He's quite friendly, and the whole design and build process is fascinating.
He also used to make a scaled down Viper V10 with a serpentine belt that put out 7 hp and was the most expensive engine per hp that I’ve ever seen ($1000. Per hp).
Definitely. Or put it full page briefly between each video. If anybody is interested, they can pause it to read every word...then visit the head...get another beer...scratch their ass...
I USED TO BE GREAT AT MANY DIFFERENT PHASES OF BUILDING & CONSTRUCTION BUT WHEN IT COMES TO DESIGNING & ENGINEERING MECHANICAL SYSTEMS I HAVE TO HAND IT TO THESE GENIUS'S. AND THE GUYS WHO DESIGNED FACTORY EQUIPMENT & ASSEMBLY LINES.....HATS OFF TO U GUYS. ALL BRILLIANT. OBVIOUSLY THE SAME GOES FOR ANY TYPE OF MOTORS.
I am afraid everything has gone electric but I love these fuel powered engines, they sound so cool. I wish all these hobbyist would go back to using them, am I right?
I am pretty sure that Moki, who make the smaller, “Large-Scale RC Aircraft Engines” have either plans to release, or have released newer 7-cylinder, and 9-Cylinder Radial Engines that mimic the Wright-Cyclone and/or Wasp-Radials of WWII, for not just a loser SOUND to the “Real Thing,” but also so the APPEARANCE of the 1/6-scale to ¼-scale Aircraft will have engines that look nearly identical to their life-sized Ancestors. And... At the same show where I saw the Moki display of their new 7 & 9 cylinder engines (working prototypes), I also saw some parts, and a video for what looked like Twin-Cyclone 14-cylinder and 18-cylinder “Twin-Wasps”/“Twin-Cyclones.” To be able to create a scale-Model of something like an A-1, B-29, or many of the other “Late-War” Aircraft would be freaking amazing... No-less-so than being able to see scale-models of the Axis Aircraft with Radial Engines (which were surprisingly few in Europe, compared to the IJN, who seem to have preferred the Air-Cooled Radials to the Liquid-Cooled In-line or V-Engines; inverted-or-not).
That YAK engine (while the shape/size scale was off), was incredible. They obviously worked had to make it sound so close to the original radial engine noise.
There was a neat little miniature airfield near the chemical manufacturing plant that I worked, and I loved watching the RC planes, such as those shown, fly about. About 5 years ago, however, the department of Homeland Security enforced new regulations regarding the security of large anhydrous ammonia installations, and the airfield shut down. It was for the best, as the danger posed was significant, but still, I feel that we're rapidly losing our freedom to tinker.
@@jenniferbeatty7545 I feel the same about DHS but in this case, they made the right call. Our site had a large anhydrous ammonia tank located outside, and rupture of the tank would have been catastrophic for the surrounding community.
Can't believe only a few of them after spending so much time building a beautiful engine let them warm up first, yet the others were revving almost immediately and snapping at the throttle! !!
I just love old engine but my cook doesn’t get it so I will try to replicate them in one sixth size She still don’t get it. Hormones I’d say Keep up the good work.
i got a 1/8 scale little motor and i don’t think i’m going to be able to pay rent this week 😂 if it cost $400 for a small one, imagine the cost of on of these.
That Rat Rod @ 1:27 was badass. I could watch that mother for hours. Seems like I remember seeing photos of the full scale machine a few decades ago...Schhwweeeeet
I took a Echo 26CC Weedeater engine and put it on a Razor Scooter you had to help it a lil to take off because of the Clutch weight but man, it was cool
I guess I got here a little late... ehy!!😆🤣!!! **BUT MAN, GOTTA LOVE THE "SPINNER's" wheels** on the rear of the of the 200cc buggy!!**SWEET!!** ANYWAY, KEEP ON KEEPING ON BROTHER AND SISTER MINIATURE BUILDER'S!!!!! PEACE !!!!!🤘🏼
@@ivebeenbamboozled9210 : I find it annoying that mostly the last footage is obscured by 'preview ads'. So the truck at the end of video isn't well to be seen.
The skill to make these is incredible.
I'm genuinely impressed with the sound of those v8's.
V 1/8s
that flat 6 looked like a work of art.
I love the look and stability of Boxer 6 engines.
You should have heard my bicycle when I was 6 after sticking a playing card in the spokes 🔥
Crom Pazuzu here’s a tip
1 card makeup’s a dirt bike sound
2 cards make a old bike(harly)
If you're poor and dont have playing cards then you can find a can on the ground and squash it on the back wheel for a similar sound effect.
Nobody like me lmao I was riding my bike sometime in the 90s when i accidentally did this but it was the best thing ever
I did that and... Balloons ! They made a very cool glass pack like sound.
Yep, I wish I had those Mickey Mantle and Hank Aaron and Moose Skowron and Whitey Ford baseball cards back in pristine condition like they were before they powered my bike. I even had a signed Babe Ruth card that I stupidly put a thumbtack through, then later lost. Genuine Babe Ruth signed in fountain pen. I don't care what it would be worth, I only care that I don't have it to pass along to my great grandson.
These engines sound more powerful than my actual car engine sounds. That’s crazy
NITRO POWER ... AT THE HOBBY SHOP BUY IT BY THE GALLON .
Stick a straight pipe on your car and try again :)
They sound powerful, but it's really the power/weight ratio and the HP you have, so these engines are just intimidating I guess.
crazyeye1,
All you have to do to make your engine sound like these is to blueprint it, port & polish the heads, install full-race roller cams, a GM 478A supercharger, custom headers and fuel it with nitromethane-alcohol.
If you can't afford that, spring clothespin clip a couple of Bee Club Special playing cards to your bike. I'm sure the neighbour kids will be impressed, if you can ever get their attention off their video games.
crazyeye1 You must drive a preus
This is the type of videos stuart little be watching
🐁😂
All I can picture is stuart little in a greaser get-up with aviators on rippin around in one of those T-buckets with a big (little) V-8 and with a tiny Marlborough Red in his mouth lmfao
*is* watching
Look I dont like to edit comments saying omg so many likes, so I'm going to reply to myself saying TF
Stuart litte better have ears buds..
These tiny engines are absolutely incredible....😮
Those are some pretty cool engines. I'm amazed at the push rod four stroke engine because of how tiny they are. I used to build motorcycle drag bikes so I'm familiar with how they are made and to see engine's this small in amazing me.
Phenomenally talented and creative engineers. Love them all!!
8:35 Great timing dude. Blocking the good stuff with links to other videos!
Jim mhmm!
That's a you tube thing, the creator gets little or no say in that. Plus it's going to get worse to the point you have to pay UA-cam just to be able to watch most content without 40% ads...
I didn't see any links
@@boatbeard7767 he actually does choose where to put the video links when publishing
There’s really interesting story about allied efforts to counter the German radio-controlled bombs. The control signal wasn’t coded. It was (I think) just a simple A.M. transmission. So the allies tried pointing a dish with different frequencies at the bombs, and this is the part of the story that I forget. The solution turned out to be so simple that any ship with a radio could do it. That was the start of encryption.
Ah, and the marvellous Heddy Lamarr - mother of frequency-hopping as we're all using today :) Her story's worth tracking down :)
@@hopefuldave they made a major movie about it. Look it up.
@@rhuttrho88 blazing saddles?
(I hope someone gets the reference)
@@AZtwoNE That's Heddy
Hedly :-)
Throttle response in that flat 4 with props is amazing
Love the Rat Rod Brown pickup truck. Engine sounds awesome. Love to have a full scale one for a nice project I've been working on. All of these are very interesting and well made.
I have to say, I'm pretty impressed with some of these engines!
Last one was a tease. That looked like a real mini diesel. And I really wanted to hear it run!
believe it or not, diesel engines were a thing in the early days of the flying model airplane hobby - this is years ago. Like when I was a kid getting in to control line and then R/C airplanes in the 70s, I would get these books on the subject from the local library and the diesel engines were already rather retro even then. My engines at the time were all 2-stroke glow plug with alcohol mixed with some nitro methane for fuel. Single cylinder was certainly easier to machine, cheaper, and basically more efficient at that scale. But I remember when multi-cylinder engines started to appear and they were really cool/exotic - and look at them now!
Very cool, the Conley stinger at 7:50 blew my mind.
It sounded like a top fuel...only a little quieter ! 😄
Engine 6.09 ci.
One thing you forgot to mention, was a wired control, where 2 wires connected to a handle ran to the left wing of a model airplane, often powered by a Cox .049 glow plug engine. You stood there, as the plane circled around you, and the handle allowed you to control the elevation of the plane, as you spun around, using the centripetal force to maintain tension on the wires. If you tipped the top of the handle towards you, the plane would pull up. if you tipped the handle the other way, the plane would nose down. They would typically fly from 3 to 5 minutes, at an approximate speed of about 35 MPH. Once out of fuel, you would gently glide the plane down, and that was the end of the flight. It's been so many years, I don't even know what that flight control system was even called. You could buy the whole plane as a kit, which included a small can of Cox Glow plug fuel, a D cell, and holder that was used for heating up the glow plug for starting, and, ofcourse, the plane, as well as the wire and control handle. The whole kit cost about $13.50 US, and they worked really well, once you learned how to get the engine started.
Control line flying. Could also have 2 in combat, cutting paper streamers.
The most important thing was it only goes up so far then it's down. Straight down. Into the ground straight down. More than once.
They also had early cars that were hooked to a line and ran in a circle and were very fast.
Amazing!
WOW ! Some of these engines sound delicious.
Pity about the truck at the end, it's engine is completely obscured by images from the following videos, as if you'd need to see them twice; they're already in the margin.
I've seen Gary Conley's mini-V8s up close and talked to him for 15 or 20 minutes about how he makes them. He's quite friendly, and the whole design and build process is fascinating.
He also used to make a scaled down Viper V10 with a serpentine belt that put out 7 hp and was the most expensive engine per hp that I’ve ever seen ($1000. Per hp).
Hey that boat was in a no wake area! Those poor children were on the beach falling over when the waves hit them. 😄
👠
I am at a lack for words,it's Wow!!!!!!!! Outstanding, Magistral.
Too much clutter blocking the engines and ads right in the middle of the screen?
No adds for me
The radials sound like the real deal, amazing
2:20 that is hands down the best rc car i have ever seen
Those 5 cylinder radials sound awesome!
Bloody brill.... it's all in the sound these beauties make.... pro rata to size.... Well done and thanks 😊👍
I watch this video over and over again. Can’t get enough small engines running so freaking cool
Lose the text! Leave it up long enough for people to read - about 15 seconds - then get it off the screen!
Listen to Bill!
Definitely. Or put it full page briefly between each video. If anybody is interested, they can pause it to read every word...then visit the head...get another beer...scratch their ass...
@@drakefallentine8351 d g g 7ygfddcvbhutrss vhhgtrr yg gggf yyyt
I USED TO BE GREAT AT MANY DIFFERENT PHASES OF BUILDING & CONSTRUCTION BUT WHEN IT COMES TO DESIGNING & ENGINEERING MECHANICAL SYSTEMS I HAVE TO HAND IT TO THESE GENIUS'S. AND THE GUYS WHO DESIGNED FACTORY EQUIPMENT & ASSEMBLY LINES.....HATS OFF TO U GUYS. ALL BRILLIANT. OBVIOUSLY THE SAME GOES FOR ANY TYPE OF MOTORS.
I am afraid everything has gone electric but I love these fuel powered engines, they sound so cool. I wish all these hobbyist would go back to using them, am I right?
Correct
40 years ago blindness was a problem with the fuel used in them. Don’t know if they switched to a less poisonous fuel, or went to electric.
UA-cam sent me here......glad they did. This was fascinating.
It's the first time that I can scroll down a bit to see the comments and still be able to watch the entire video.
This was more fun to hear than from my lawnmower.
That rat rod sounded amazing!
Ty 4 sharing and uploading!
It blows my mind how much technology has come along. These little engines are so cool
Technology is the wrong word, Conley started making mini v8 engines 40+ years ago, it's just old fashioned machining and engineering skills.
4:47 spinner rims!!! lol nice!!
These people take RC cars to a whole new level. That ratrod was awesome.
Do you like these Engines ? :)
There awesome!!! 🏁🏁👍👍👍
I think the same
Sounds like real engines.
The rod at 8:09 is my build 👍
I have a video but it’s on my damn face book I’m trying to get it uploaded here but she definitely wasn’t fast made for power 👍
These little motors are just awesome,you guys are talented
I am pretty sure that Moki, who make the smaller, “Large-Scale RC Aircraft Engines” have either plans to release, or have released newer 7-cylinder, and 9-Cylinder Radial Engines that mimic the Wright-Cyclone and/or Wasp-Radials of WWII, for not just a loser SOUND to the “Real Thing,” but also so the APPEARANCE of the 1/6-scale to ¼-scale Aircraft will have engines that look nearly identical to their life-sized Ancestors.
And... At the same show where I saw the Moki display of their new 7 & 9 cylinder engines (working prototypes), I also saw some parts, and a video for what looked like Twin-Cyclone 14-cylinder and 18-cylinder “Twin-Wasps”/“Twin-Cyclones.”
To be able to create a scale-Model of something like an A-1, B-29, or many of the other “Late-War” Aircraft would be freaking amazing... No-less-so than being able to see scale-models of the Axis Aircraft with Radial Engines (which were surprisingly few in Europe, compared to the IJN, who seem to have preferred the Air-Cooled Radials to the Liquid-Cooled In-line or V-Engines; inverted-or-not).
That T bucket was just awesome!!!
I love that old rat rod!
Hii
All awesome... but that 5 cylinder radial sounded utterly beautiful!
That YAK engine (while the shape/size scale was off), was incredible. They obviously worked had to make it sound so close to the original radial engine noise.
Sounds so real!great job!
These mini engines are so damn cute! ❤️
Baby engine
Holy dam! That hot rod was badass the little drift too! Lol badass shit man🤙🏼🤙🏼
3:10 Stunning boat
That was just outright entertaining! Thanks, I never kept up on these little engines but they gotta be a good bit of fun lol 😆
Those 'Stingers' sound absolutely amazing! 👊
Respect & Salute for the Passion & Craftmanship involved! Genius! Thank You So Much for Sharing! ♥️🌷🕯
Jeremy Clarkson did a program years ago with a guy who made a miniature Ferrari engine, that sounded amazing.
Every one of those engines are badass!!!!!!
1:38 => That Hot Rod was SWEET in every way ! => Thumbs up !!! This is the only gas powered RC that I have seen in 25 years, which I´d like to own...
Many of the 1/5 scale RC cars and trucks have gas powered engines ranging from 23 cc to around 50 cc. You haven’t looked very hard.
Who what how. These things are amazing.
These literally sound more powerful than those rice rockets.
There's literally 4 cylinders in this video lmao
Ignorance
There are literally more powerful than HD engines!
Awww...Flat crankshafts an then you have a engine. The V8 does not sound well. Like its damaged, shaking like it's damaged
Most of the ricer cars you see with the straight pipes, garbage tiny 4cyl, and fake ass spoiler probably have less power than a 2cyl 600cc snowmobile.
nice little engines, radials sound great and just like big engines.
2:19 Sounds so good
Gorgeous machine work...Absolutely outstanding.....
I'd love to see one of these little 8 cylinders put on a bicycle not a motorcycle a bicycle💪🏻
brilliant stuff :)
Love that car, I NEED one
That 609 with the transmission was sick.
At 3:12 is it just me or is this engine actually saying the word "vroom"?
yeahhh... great video :))))
The founder of Kenworth trucks built a mini cab over with trailer that will blow your mind. It runs and drives and looks like the real thing.
Is it this one?
ua-cam.com/video/tY_bKZxWOzc/v-deo.html
They are all works of art
That hot rod was lit af
these are works of art.
There was a neat little miniature airfield near the chemical manufacturing plant that I worked, and I loved watching the RC planes, such as those shown, fly about. About 5 years ago, however, the department of Homeland Security enforced new regulations regarding the security of large anhydrous ammonia installations, and the airfield shut down. It was for the best, as the danger posed was significant, but still, I feel that we're rapidly losing our freedom to tinker.
Where do you get the spark plugs?
That wasn't the real reason it was closed. They're deceptive and yes, there's no real freedom...
@@jenniferbeatty7545 I feel the same about DHS but in this case, they made the right call. Our site had a large anhydrous ammonia tank located outside, and rupture of the tank would have been catastrophic for the surrounding community.
Can't believe only a few of them after spending so much time building a beautiful engine let them warm up first, yet the others were revving almost immediately and snapping at the throttle! !!
The rod at 8:09 is my build pretty excited to see it make its way around UA-cam 👍
I have a few vids of it on my UA-cam channel
I spend All that time and money in to something you can't get into? The cool things these guys could build!
gentlemen... start your engines
Overwatch? Or Rupaul?
@@childrenofbodom33333 cars
@@kalashjaiswal8856 fair enough
Nice... some very detailed builds for sure.:. Seriously tiny parts... crazy.
Very Impre$sive!
Well Done mates!!!
I think they are great that plane it's engine sounds spot on
I just love old engine but my cook doesn’t get it so I will try to replicate them in one sixth size She still don’t get it.
Hormones I’d say
Keep up the good work.
Awesome video
Small engines sound exactly like those V8s, V10s, and V12s from Forza lmao
THAT PRESENTATION WAS AWESOME. GOOD F-----IN WORK. GOOSEBUMPS!
7:46 when your angry and somebody touches you.
That coupe is awesome!
i got a 1/8 scale little motor and i don’t think i’m going to be able to pay rent this week 😂 if it cost $400 for a small one, imagine the cost of on of these.
That Rat Rod @ 1:27 was badass. I could watch that mother for hours. Seems like I remember seeing photos of the full scale machine a few decades ago...Schhwweeeeet
Lets get some likes going for the 4cylinder RC Hot Rod😄
10,000 LIKES OK
Loved it ❤️
What a nice engine!!! Love also the jerry!!!
If i ever have a kid im gonna put 2 of these in his power wheels lol
I think one will be more than enough ;)
Custom lil V8 around 2hp be cool
I took a Echo 26CC Weedeater engine and put it on a Razor Scooter you had to help it a lil to take off because of the Clutch weight but man, it was cool
@@nicke1903 That sounds cool, do you have a video?
You're probably the annoying piece of shit in your neighborhood.
Wow even a tiny v8 sounds awesome 😎👍
5:44 been smoothest
6:50 been badass
Beautiful creations
🛩 🚘
someone has the last full video of the truck?
It is annoying, isn't it.
@@eknaap8800 ---> It is... 🤨
Transparent textbox, my dude. They go a long way
Sounds like drums: 4:28
i couldn't stop laughing imagining someone furiously playing the bongos
I guess I got here a little late... ehy!!😆🤣!!! **BUT MAN, GOTTA LOVE THE "SPINNER's" wheels** on the rear of the of the 200cc buggy!!**SWEET!!**
ANYWAY, KEEP ON KEEPING ON BROTHER AND SISTER MINIATURE BUILDER'S!!!!!
PEACE !!!!!🤘🏼
Yeah, they're cool.
Glad I don't live nextdoor to any of these guys.
People who made the engines deserve respect
The semi at the end does it have an mini engine too?
It is annoying, isn't it.
@@eknaap8800 what is?
@@ivebeenbamboozled9210 : I find it annoying that mostly the last footage is obscured by 'preview ads'. So the truck at the end of video isn't well to be seen.
Pretty cool