Repair Peeling Paint on Fascia - GREAT tips
Вставка
- Опубліковано 9 лют 2025
- How to repair paint that is peeling on the fascia board which is a waterproofing and support mechanism just below the roof of your house.
************************************************************************************************
PATREON: I have made all of these videos at my own expense.
If you like the videos and the concept of free education for all please consider becoming a patron of the channel by clicking here and making a small monthly donation to support the channel www.patreon.co...
Thank you.
*************************************************************************************************
My equipment:
Camera: Panasonic GH 5
GoPro 5
Sony NX5
Edit: Premiere Pro
Final Cut
Music: Studio One
My library (all music made by me)
Gimbal: Ronin
Mics: Sony lapel mics
Camera mics
Drone: Mavic mini
High quality video. Clear and concise. Thank you for sharing.
Curious12345
Well done mate. Clear easy to follow instructions. Cheers.
What a lot of work!
@Damon Cross Low tech my ass. I beg to differ.
Careful. Bleeding wood like cedar must be spot primed with an alkyd based primer, oil. Prime before patching then continue as described.
For douglas fir and redwood roofs, is oil-based primer best?
So should i pressure wash before
Yes - always - to clean the surface of dirt and to blow off loose old paint.
Nice vid. Please include in the notes what products were used. I did not hear clearly the product mixed to stop fungal rot.
The fungus killer is household bleach
Would you fill cracks and holes in the fascia with a wood filler or with caulk? Which one is better and why? I would like to fill a countersunk nail. What about a crack that around1/16 of an inch.
We do have 3 crack filling videos on this channel. Have a look at our videos section.
There are many fillers to fill different size and depth of crack. Makes and brands depend on where you are in the world. Caulk cartridges in a caulk gun are great for smaller cracks (up to 1/8th inch) and cement powders that you mix with water are good for larger cracks. Put stones into lager cracks as you trowel in the cement to help fill the gap. It's best for you to visit your local hardware store, hopefully they have people there who can give you reliable advice. Good luck, kind regards.
I know this sounds like a dumb question, but what kind of brush did your guy use for removing debris around 0:56? Thanks.
It's just a little hand brush from a dustpan & brush set.
Wear a mask when sanding paint & filler.
You would need to Sand the paint all off and restart from bare timber. it's only going to lift off again if you don't.
Now that's a lot of hard work!
@@gmtv734 yes but it would last way longer
what is jik...
Household bleach
I'm starting to feel really lazy....
Please don't sand with hand use a random orbital machine
Howz to fix my gutters bru ? I'll give you R2 :)
Good lord there dude. Lemme see your ass get up on a ladder and feather sand an entire eave and all of a house, then mud it, then sand again then prime it, sand again and then finaly paint.. .. oy..
I have a three steppermethod.. pressure wash with purple power diluted, wait until dry, scrape at it all not too hard tho, then use the all in one primer And paint , and paint.. dun....
That sounds a lot easier. Do you use purple power on a deck you’re power washing for staining?