It looks really good. I like the idea of the hole and how you made it. Looks a lot easier than what you normally have to do with cutting a hole in the bottom of the base plate for the mag. Would like to know if you finalized the design cause I would love to make some of those myself.
They also looked at the MP5 because it looked more futuristic to begin with but couldn't produce anywhere near the levels of muzzle flare with a 9mm cartridge, so the idea was scrapped and they ended up with a WW2 gun that still looks futuristic by modern standards and impressively the Pulse Rifle was designed by Cameron himself, not a specialist designer or movie armourer. The Tommy Gun drum mag is also where the impossible 95 round capacity came from. The M1A1 has a 100-round drum mag option, but soldiers used to only load it to 95 for increased reliability (so as to not over compress the spring, exactly as UK soldiers only used to load 28 rounds into 30 capacity mk1 SA-80 mags). Cameron wanted this but without the bulk of the drum, so used a shortened box (or stick) mag that fit inside the shroud and 'hollywood magic' to increase the capacity of the weapons.
I'm mostly trying to find out how to load the darn magazines, but this is awesome. One thing that would be great is a print file to make the channel for the magazine extend to the bottom of the mag well. Right now you have to fiddle to find it.
I don't sell them, unfortunately, but the design is available for free and there are commercial printing services who will print it for you and post it to you for a small fee. cults3d.com/en/3d-model/various/snow-wolf-m41a-pulse-rifle-magazine-baseplate
@@SteamGeezerUK thanks so much! I contacted a 3D print service on Etsy and just got my mag guide and sights in the mail. You've been a great resource! Thanks again!
I did this mod with the EXISTING parts of the gun itself. make a hole at the bottom of the cover to be able to use the wheel on the mag and use rubber spacers around it.
Hi there, Do you sell the 3d base plate bits for the magazines?? I recently bought one lf tbese 2nd hand and the original cover clips need repairing and would rather put one of these that you designed on instead👍 Appreciate any reply as looking to buy ASAP Cheers👍
I don't, unfortunately, but if you go on Cults3D, you can have an STL you select printed and posted to you for a fee. I think that's probably your best bet. In all fairness, a professional service will probably do a better job than I could 🙂
You literally rescued that design. Seriously that’s awesome. I couldn’t own that airside gun without that modification
Not all of us have 3D printers, so I'd definitely buy a couple if i could find them on ebay or something
We got nukes, knives, sharp sticks!
Nice Pulse Rifle 👍🏼👍🏼👍🏼
It looks so real
I'll be watching Thingiverse. Nice job.
It looks really good. I like the idea of the hole and how you made it. Looks a lot easier than what you normally have to do with cutting a hole in the bottom of the base plate for the mag. Would like to know if you finalized the design cause I would love to make some of those myself.
Jingles is drooling 😆😆😆
Top job! 👍🏼
Yea..They didnt insert effects back then. Cameron wanted the weapon that produced the most muzzle flash..So the Thompson was chose.
They also looked at the MP5 because it looked more futuristic to begin with but couldn't produce anywhere near the levels of muzzle flare with a 9mm cartridge, so the idea was scrapped and they ended up with a WW2 gun that still looks futuristic by modern standards and impressively the Pulse Rifle was designed by Cameron himself, not a specialist designer or movie armourer. The Tommy Gun drum mag is also where the impossible 95 round capacity came from. The M1A1 has a 100-round drum mag option, but soldiers used to only load it to 95 for increased reliability (so as to not over compress the spring, exactly as UK soldiers only used to load 28 rounds into 30 capacity mk1 SA-80 mags). Cameron wanted this but without the bulk of the drum, so used a shortened box (or stick) mag that fit inside the shroud and 'hollywood magic' to increase the capacity of the weapons.
You could make more of those and sell them on Amazon or Ebay. The front angle is about 5 or 10 degrees to steep.
Would it be possible to have a smaller battery for the ammo counter? I dislike it sticking out the bottom of the rifle.
I'm mostly trying to find out how to load the darn magazines, but this is awesome. One thing that would be great is a print file to make the channel for the magazine extend to the bottom of the mag well. Right now you have to fiddle to find it.
I'd like to buy one of your 3D printed magazine base plates. Are they available for purchase?
I don't sell them, unfortunately, but the design is available for free and there are commercial printing services who will print it for you and post it to you for a small fee.
cults3d.com/en/3d-model/various/snow-wolf-m41a-pulse-rifle-magazine-baseplate
@@SteamGeezerUK THANK YOU! Any recommendations on filament/material that would be best for this application?
I printed mine using eSun's PLA+, which is pretty much what I use for everything. I suppose you could use ABS, but I've never tried it myself@@OCDisMe
@@SteamGeezerUK thanks so much! I contacted a 3D print service on Etsy and just got my mag guide and sights in the mail. You've been a great resource! Thanks again!
You're very welcome@@OCDisMe
Ooooh that's a nice pet you got there Bishop....😜
Magnificent, isn't it?
I know this is a year late, but can you sell these on Etsy. I would buy a few. That is an annoying feature on this pulse rifle.
Where do you find the 3d planes ??? I have the same pulse rifle
Do you sell the part for the bottom off the mag for those who don’t have 3d printers
I did this mod with the EXISTING parts of the gun itself. make a hole at the bottom of the cover to be able to use the wheel on the mag and use rubber spacers around it.
Now that is a lovely thing :)
Sick work.. Will defo.. Get 1 for mine.. Thanks
So does it have a sound generator??
Where did you get this pulse rifle? I would much rather have this than the Nerf version thats been released recently. How much did it cost?
Geeky Goodness 👍
Hi there,
Do you sell the 3d base plate bits for the magazines?? I recently bought one lf tbese 2nd hand and the original cover clips need repairing and would rather put one of these that you designed on instead👍
Appreciate any reply as looking to buy ASAP
Cheers👍
I don't, unfortunately, but if you go on Cults3D, you can have an STL you select printed and posted to you for a fee. I think that's probably your best bet. In all fairness, a professional service will probably do a better job than I could 🙂
@@SteamGeezerUK Thank you, i will search out a local 3d Printing company and go from there🙂👍
I need one of these.. for a real thompson build..
I'm not sure how well it would stand up to an actual firearm... 😂
cool but were did you get the pulse rifle and how much please..
Very cool, will you be distressing it a bit?
Interesting, I feel like modifying my pulse rifle and I got same bb gun
Great video. 💥💥💥💥💥💥💥👍
Just a comment for the algorithm
Can you make me one of those base plates please... Its so annoying having to take the cover off and wind the mag. Will pay you obviously.
Jingles was looking for one of those!
Do you offer the 3D file anywhere?
It's on Thingiverse. You can get it from there for free.