Cub Cadet Original 1961.wmv

Поділитися
Вставка
  • Опубліковано 2 січ 2025

КОМЕНТАРІ • 54

  • @SPCLPONY
    @SPCLPONY Рік тому +1

    It's amazing how one catches 'the bug' for these old Cubs. I came across a pretty nice Cub 124 sitting in a coworker's driveway covered in snow. I found out he didn't have a mower all summer, so he bought it pretty cheap out of desperation to get his waist high grass cut! He broke the deck belt and didn't know how to fix it, so it sat. I bought it for $350 & brushed a foot of snow off of it, put in a good battery and inflated a tire. It drove right up into my trailer like it couldn't wait to go to a new home. I didn't know the fiberglass pan seat was highly sought after, but it's there on mine.
    I later found out he'd bought it from someone I knew, and he was glad to hear I ended up with it. His dad bought the 124 and a #1 cart as a set. He offered the cart to me for $100. They are a set once again!

    • @IHcubcadet
      @IHcubcadet  Рік тому +1

      They are great. If I had a place to store them I would have more.

    • @SPCLPONY
      @SPCLPONY Рік тому

      I wonder if you know your way around the clutch at the front of my 124 Cub? It seems the last time I mowed with it, the drive to the mower deck remained engaged when the lever is in the release/stop mowing position.

    • @IHcubcadet
      @IHcubcadet  Рік тому

      @@SPCLPONY So basically the way the clutch works is when the lever is in the disengaged position it pushes on a little button on the front of the clutch which pushes the three pressure plate fingers in that releases it. If one of the fingers breaks or the button breaks or wears out the clutch could be engaged all the time. On these tractors it’s best to remove the belt and leave the clutch engaged when an attachment is removed to prevent clutch wearing.

    • @SPCLPONY
      @SPCLPONY Рік тому

      @@IHcubcadet I see what you mean now that I've had a look at it. It looks like my PTO clutch needs some attention. Thanks for your reply!

  • @michealsinclair7061
    @michealsinclair7061 3 роки тому

    I own a 1971 international harvester Cub cadet model 108

  • @jimmytate7587
    @jimmytate7587 2 роки тому +2

    i see you have the hydraulic lift on the rear but i didn't see the compressor. I have a 61 with the lift and have fond it to be extremely useful.

    • @IHcubcadet
      @IHcubcadet  2 роки тому +1

      Actually this one only has the manual lift so no hydraulic pump.

  • @hairydude978
    @hairydude978 3 роки тому +1

    Good job on the restore, I have one that was for my son that passed away and didnt get done. I have the oem light kit to put on mine. Still has original engine with oil bath air cleaner

  • @cr500ridr
    @cr500ridr 9 років тому +4

    What an amazing and beautiful restoration of such a nice and rugged lil tractor !Congratulations on that lil gal ! She will surely outpull ,outpower ,and outlast any of the junk that's manufactured nowadays available in the big box stores !If only we could return to those days of glory in America when machinery was manufactured here and not abroad .Even tractors of this size were made to last for generations if well taken care of .Can't say enough ,awesome restoration !

    • @IHcubcadet
      @IHcubcadet  8 років тому

      +cr500ridr Thank you very much!

    • @jefffloyd3480
      @jefffloyd3480 7 років тому +1

      cr500ri

    • @kevintomb
      @kevintomb 3 роки тому

      I agree in one way, but completely NOT in another. If you consider the price of ANY garden tractor back then compared to inflation of the price NOW, they were EXTREMELY expensive back then. They were hard for the average person to even afford. Factoring in inflation an old cub from the mid 60s would be about $6,000 today~! Let that sink in. So in other words, you need to compare to a $6,000 tractor of today, not a $1500 one.

    • @jimmytate7587
      @jimmytate7587 2 роки тому

      you are right, but imagine the cost if todays tractors were built that well.

  • @paulg444
    @paulg444 4 роки тому +4

    Just a fantastic cub, great job !!

  • @SteelyPaw
    @SteelyPaw 7 років тому +2

    Really a nice job restoring your tractor... We had a 1964 7 hp, looked a lot like yours, of course I was around 9 years old at the time, and I was the principal driver and lawn mower for the family.. Your tractor brings back memories...

  • @UnkleAL1962
    @UnkleAL1962 5 років тому +2

    not sure about the year but my nephew restored our original and it has the oil bath air filter, and a pull start, and the original 7hp motor. The pull start is impossible to find parts for from what I understand, so we only use it occasionally to show at the fair, etc. I grew up on that tractor and was expected to mow as soon as I could start it myself which was probably around 8 years old I been mowing a long time Lol.

  • @alfredpriestley841
    @alfredpriestley841 3 роки тому +1

    LOOKS LIKE A OLD NEW TRACTOR I HAVE A SIXTY FIVE ONE HUNDRED AND IT'S RESTORED AND BETWEEN ME AND MY YOUNGER BROTHER'S WE HAVE A TOTAL OF EIGHT DIFFERENT TRACTORS ONE THAT MY DAD HAD BOUGHT NEW BACK IN SIXTY FIVE A ONE HUNDRED AND THE ONE TWENTY FOUR MY GRANDPARENTS BOUGHT A THE ONE TWENTY FOUR BACK IN SIXTY NINE NEW AND WE HAVE BOUGHT SIX MORE OF THEM DIFFERENT TRACTORS ALL OF THEM THEY ARE ALL IN THE SIXTIES WHEN THEY WERE ALL PRODUCED AND THEY ARE CLEARLY THE LONGEST DURABLE POWERFUL GARDEN AND LAWN CARE MACHINES EVER BUILT AND THAT WAS A GREAT RESTORATION OF THE SIXTY ONE

    • @IHcubcadet
      @IHcubcadet  3 роки тому

      Thanks. I also have a 100 that’s restored on my channel. There indeed are extremely tough.

  • @marksleeper3752
    @marksleeper3752 5 років тому +3

    nice job

  • @TracTech
    @TracTech 9 років тому +2

    Nicely put together.

  • @lskiller1903
    @lskiller1903 5 років тому +1

    I have a 1961 four digit I mow with weekly.

  • @lskiller1903
    @lskiller1903 5 років тому

    Nice wagon puller, it's a shame it's not complete after all the work that was put into the restoration.

  • @lukebecker1959
    @lukebecker1959 5 років тому +2

    Looks good

  • @ureasmith3049
    @ureasmith3049 7 років тому

    Thought it was a sears suburban at first with that funky color. Nice job.

  • @geraldwilcox2427
    @geraldwilcox2427 6 років тому +2

    That is just a darker yellow. I like it, great job on it.

  • @sg1553
    @sg1553 6 років тому +2

    Is there a way to replace the drive belt and get it on the clutch pulley without taking the whole clutch assembly out abd apart? Thanks. I'm restoring a 1961.

    • @IHcubcadet
      @IHcubcadet  6 років тому +1

      Yes there is a way. It’s been 8 years since I replaced my belt so I am trying to remember how it was done. I think there are two or four bolts that hold the clutch bracket to the frame. Remove those and there should be a way to slide the whole assembly forward. Once the bolts are removed with the help of another person you may be able to use a big screwdriver and carefully pry between the frame and the clutch mount bracket to gain enough space to slide in your new belt.

    • @sg1553
      @sg1553 6 років тому +1

      Thank you for the reply. I'll try that and let u know how it goes

    • @sg1553
      @sg1553 6 років тому +1

      I got it done. I released the brake pedal the whole way up. Poped off the pin that holds the yoke. Dropped the bracket down. 2 bolts on left and one on the right to drop the pulley bracket end of the clutch system. Wrapped it around the bracket and put the belt around the yoke that I disconnected then reinstalled the yoke pin using a little turn vice to line up the pin hole. Then I reinstalled the three bracket bolts to put the assembly back. I called cub cadet and they emailed me the manual and specs no charge.

    • @sg1553
      @sg1553 6 років тому +1

      Thank you for your help again. Nice tractor.

    • @IHcubcadet
      @IHcubcadet  6 років тому +1

      Nice work! Wish I could have been more helpful, but like I said Its been a while since I worked on mine. Thats great they sent you the manuals for it, its getting harder and harder to find that type of info thees days.

  • @farmall51
    @farmall51 12 років тому +2

    Very Nice. Hope I can get mine to look that good.

  • @richardross7219
    @richardross7219 5 років тому +3

    Beautiful. To me the shade of paint seems a little darker than mine was. Maybe mine was a little sunbleached. Good Luck, Rick

    • @IHcubcadet
      @IHcubcadet  4 роки тому +1

      Thanks, the paint is not correct, its the newer cub cadet color.

  • @flhusa1
    @flhusa1 8 років тому +2

    the original cub cadet had a 7hp engine

    • @IHcubcadet
      @IHcubcadet  8 років тому +1

      +J Davidson (Mr. Tinker) Yes it did. But like I showed in the words in the very beguining of the video the standard replacement engine fir the 7HP was the k181 8HP. At some point someone probably blew the original and had this installed.

    • @lskiller1903
      @lskiller1903 5 років тому +1

      They also had a mowing deck and a mile drive and a complete rear lift.

  • @JohnnyRebKy
    @JohnnyRebKy 5 років тому +2

    What’s something like this cost?? I’d love to have one!!! I’m a John Deere guy when it comes to modern stuff but IH knocked it out of the park back in the day!

  • @not2fast4u2c
    @not2fast4u2c 12 років тому

    NICE Restoration !!!

  • @The5upermann1
    @The5upermann1 10 років тому +4

    I like how you modified the clutch linkage. It was a definite weak point in the original's design. I had to weld mine back together because it was broken. I hope my weld holds! lol. How is the progress on the cub 100 going?

  • @Motoboy06387
    @Motoboy06387 8 років тому +1

    What is the rear tire size?

    • @IHcubcadet
      @IHcubcadet  8 років тому

      They are 6-12 Carlisle Tru Powers Over all there about 23'' tall

    • @Motoboy06387
      @Motoboy06387 8 років тому

      +IHcubcadet Okay, thank you!

    • @Motoboy06387
      @Motoboy06387 8 років тому +1

      +Motoboy06387 Absolutely beautiful tractor!

  • @SpeedyChevy72
    @SpeedyChevy72 12 років тому +1

    what is your tire size in the back?

  • @farmall51
    @farmall51 12 років тому +1

    Yeah I'm picking it up in Iowa a the Red Power Roundup. its got everything on it including the deck. its #15567 its a later 61 but its still a 61

  • @shobud7561
    @shobud7561 5 років тому +1

    Why didn't you rebuild the 7 hp engine that came on it ?

    • @IHcubcadet
      @IHcubcadet  5 років тому +2

      Sho Bud becaus when I bought it this engine was in it.

  • @bradybarkela897
    @bradybarkela897 9 років тому

    Ever sell sleeve hitch components

  • @drglinski
    @drglinski 12 років тому

    Great job. Love the 3 pt. hitch on the rear. Question- why is the final paint orange?

  • @1944johndeerel
    @1944johndeerel 12 років тому

    the guy I got my 1973 140 from has a cubcadet original and a 100 sitting outside. he says he rebuilt the engine in the original for a guy and then wound up with the tractor

  • @sarge3ad
    @sarge3ad 11 років тому +2

    Nice job!

  • @CodyJohnstonbaugh
    @CodyJohnstonbaugh 11 років тому +3

    Why is it orange?