@@alexhartford8086 Which one is yours? my last one is the bottom center. Can't even get it off with pliers. Ripped the back plate off to try to get to it that way and no luck.
I have the model with the top 3 additional screws. It’s one of those 3 near LB. Luckily I work in an auto shop so I’m gonna see what I can do at work tomorrow. In the meantime I crammed thick cardboard paper between the button housing and side and it’s holding strong.
@@alexhartford8086 Yeah the card board trick worked for me as well. I'm going to have to get a new shell once I get the screw off. Good luck with it man.
Had my back left one go a 6 months ago, so when I saw this kit come out I was thinking finally someone's done this. I'd bought a new dual sense edge so still had the broken one in my drawer, got the kit, and replaced the left side. After that I thought maybe I'll do the right side now since it's all open, and once I took that side apart and looked at the piece it was just hanging together by a thread. Now that both sides are replaced everything works fine. Not expecting this to last forever (until someone makes a full metal replacement part), but the repair is simple and for $20 Canadian, to do both sides it's cheap IMO. Sure the cost of the controller is high, but if this is the only flaw, and I can replace the sticks easily then it is what it is. I know ppl that spend the same on a Scuff and once that POS breaks you're not going to be able to fix it at all, and good luck getting it fixed under warranty. Overall great product, fixes the issue and there's not much to do except remove a few screws, pop it open and swap the new piece in.
I just gently ripped off the whole piece left the screws in ordered the piece I ripped off from this same company different color made it look cooler lol the took a small screw driver in the holes where the stripped screw was widened the hole and placed it on put screws in the other ones that came out and it was like I never had a problem
When will this be back in stock? I desperately need this repaired, I was about to buy an entirely new DS Edge controller, this is obviously a MUCH better option! TYSM! :)
Your new back button kit is an absolute godsend. Had the same issue with that small metallic part that keeps breaking. Do you know if the new version of the DS Edge has improved the durability of that black metallic part in which you insert the paddles? I think I have to get a new DS controller as the module for the back left button has worn out and doesn’t work anymore. I played too long with the dodgy broken back paddle.
We tried to improve the material of the metallic part, so hopefully will last longer than the original one. We found they try to solve this problem on the new version as they use 2 plastic pieces to substitute the 2 tiny metal rods, not sure if it works but we inspected 3 new DS edges, and all of them are missing at least 5 screws inside of the controller, and the metal bar between the LB & RB also missed. We were stunned lol
Absolutely not....bought my first 1 not even a month ago. right back button is shot out....bought another 2 days ago....same button is already gone....most expensive CHEAP POS. I swear!
APPARENTLY Sony updated the internal components of the Duelsense Edge, so this repair kit wont with everyones. Best to open your controller first to see if this repair kit is even viable fit 😢
My controller broke earlier this week. The actual button on the green grid is broken. It doesn’t press down like the other side. The dot in the middle wasn’t in place. I think the medal piece it sits on went flat. It gives the clicking sensation if it’s still flexible. Where do I find the new green grid piece this sits on?
Oh, two things. I think on FB a while ago I asked if you will ever have paddles like you do for the Xbox controller for the DS5 and I think someone replied that you're working on it. Is that still happening? Will you also be doing a mod for the DS5 Edge trigger stops so there's even less pressure input? Just a thought. Not an issue for me personally but I know the Edge got rated lower on YT reviews because the trigger stop settings weren't as short as other pro controllers. I believe you are the guys that could fix that. Lol!
Idk about these stuff but I messaged them on fb about Hall effect units for the dual sense edge and they said they won’t make it. I also asked if they are making a 4 button replacement instead of 2 button for the pro controller and they said they are working on it but it’s gonna take a while
Yes we are working on the buttons style back paddles kit for the dualsense controller, just not going smooth because we have to make them good to press and easy for installation, so it will take a while. And we are working on another paddles style solution. For the trigger stop clicky kit, we are working on it, please stay tuned.
@@ExtremeRateWill the Hall effect thumbstick modules be only for the edge or the normal dual sense too? And when is the expected release date? Curious so that I know whether to buy an edge or keep my normal dual sense with your back button kit since Hall effect thumbstick modules would be amazing
The problem with mine isn’t regarding input, but just that the paddle sticks when pressed and it’s extremely inconvenient. Does anyone have a fix for this i’ve tried cleaning and compressed air etc or do i just have time to replace it
Mine felt the same way, it's a little plastic piece that's broke. Once you press the paddle it doesn't reset so you can press it again. I got this kit and fixed my back left side, and also did the right side since I had it all open. Everything works fine now.
probably not until someone makes that piece in all metal. Depending on how hard you are on it might get a year out of it. I know some guys who have had their edge for over a year with no problems, mine lasted 9 months. I got the kit and just fixed everything myself, took 20 min and then I don't have to wait to get it back from Sony, so for $20 Canadian it's cheap and it fixes the issue.
Sheeeet I guess my dualsense edge must be a newer revision? My controller has a slightly different internal layout and my back button modules are a totally different shape. Also my controller doesn't even have that metal bracket bar... Unfortunate...
We've got the newer version of the DS EDGE! And we found our replacement module fit on the newer model! We are going to make a new video to show how. BTW, we got 3 new version Edge, and all of them are lack of screws and the metal bar, if that's how Sony cost down, it will be a shame.
Btw I appreciate you guys reaching out, I've had nothing but positive things to say about extremerates. I'm in no rush, my back buttons currently work fine, I just enjoy taking stuff apart.
Please check this link to identify your controller version and choose the correct version of RISE4 kit. extremerate.com/blogs/replacement-guides/how-to-identify-ps5-bdm-010-bdm-020-bdm-030-and-bdm-040-controller
Hey, do you have any recommendations on gamepads for fps games? Explicitly for CoD Warzone, it has to have back paddles but at the same time, not cost 200$
Hello! I bought this kit to try to fix my controller but I found out that there is a biggr problem. As this broke within 6 months of use and there were no replacements back then. I kept using. It broke the bubble like button inside. It seems that this is what pushes the back button back once you press on it. I can still use it but the back button is very sensitive. It appears that this part inside the controller can be removed easily but I couldn't find any replacements and your kit does not come with this replacement. Are you guys working on a replacement any time soon? If you an provide an email address so I can send a picture please. That will be great. Thanks!
It's not the magnet, this the little plastic piece that's broke, mine felt the same way. I just got this kit and fixed my back left side, and also did the right side since I had it all open.
@ExtremeRate can you please tell me if i purchase your clear xbox thumbstick replacements. Will xbox style kontrol freeks fit on them if they do i will purchase some cuz i got ripped off with ones that are too small to fit with kontrol freeks
Without you guys, there would be absolutely no reason to buy these crappy PS controllers. I bet you guys could easily build a better pro controller than Sony has.
It's a major design flaw, but the only issue I've ever had with this controller. Its easy to do the repair, and IMO cheap for the kit. The good news is you can replace the sticks once you get stick drift, and if you had a scuff, or something else, once it breaks or gets drift it's garbage, so at least with this you can get good milage out of the controller. It's like buying a nice car and having to repair the brakes.
Now we have more reason: On the newer version of the DS EDGE, they saved at least 5 screws and 1 metal bar inside of the controller, that's rediculous.
Damn, didn't know there were issues with the back buttons. ExtremeRate FTW!
:D
@@ExtremeRatengl guys, customers have been asking for DS Edge Clicky trigger kits for over a year😭not back button mechanism replacements
The clicky triggers kit is more complicate than the back buttons, we will make the shortest triggers clicky, the other 2 trips still work!
Used your kit and fixed the issue. Great video! Really informative. Such a shame these controllers aren't more robust.
ExtremeRate is coming through clutch for Sony on this issue. Slick product, easy fix. Never looking anywhere else for gaming accessories.
Last Friday, my left back paddle broke and you already got this! GREAT WORK!!!!
what a bummer they sold out. Hope they restock this product very soon.
Waited over a year for this. Bought it instantly and it did not disappoint. ExtremeRate came in clutch!!!!!!!!🎮
Is it better than the original?
Ordered your kit on Amazon and got it the next day. Nice kit, nice tutorial. Thank you very much guys, keep up the good work!
Thank you so much for this. I have been waiting for this because i didn't buy the warranty for my dualsense edge
Just ordered 2 pairs cant wait to fix dualsense edge
Finally a solution to this issue. My controller was under warranty so got it fixed by Sony but if it happens again now I can get this 👍
;)
Screw driver worked for 7/9 screws. Not sure how I want to go about getting the last 2 screws out.
Yep I have a stripped one that won’t come out. This is so stupid.
@@alexhartford8086 Which one is yours? my last one is the bottom center. Can't even get it off with pliers. Ripped the back plate off to try to get to it that way and no luck.
I have the model with the top 3 additional screws. It’s one of those 3 near LB. Luckily I work in an auto shop so I’m gonna see what I can do at work tomorrow. In the meantime I crammed thick cardboard paper between the button housing and side and it’s holding strong.
@@alexhartford8086 Yeah the card board trick worked for me as well. I'm going to have to get a new shell once I get the screw off. Good luck with it man.
Broo SAME FOR ME 💀the middle screw and the left upper screw with the back of controller faceing me
I love this lol this and the grips coming off are the most common complaints
We are working on a solution for this problem, please stay tuned
@@ExtremeRate I bought your shell to replace the original grip problem from the oem controller and get lots of compliments on it
Had my back left one go a 6 months ago, so when I saw this kit come out I was thinking finally someone's done this. I'd bought a new dual sense edge so still had the broken one in my drawer, got the kit, and replaced the left side. After that I thought maybe I'll do the right side now since it's all open, and once I took that side apart and looked at the piece it was just hanging together by a thread. Now that both sides are replaced everything works fine. Not expecting this to last forever (until someone makes a full metal replacement part), but the repair is simple and for $20 Canadian, to do both sides it's cheap IMO. Sure the cost of the controller is high, but if this is the only flaw, and I can replace the sticks easily then it is what it is. I know ppl that spend the same on a Scuff and once that POS breaks you're not going to be able to fix it at all, and good luck getting it fixed under warranty. Overall great product, fixes the issue and there's not much to do except remove a few screws, pop it open and swap the new piece in.
I have two screws either side of the paddles that are stripped. Tried WD40 and nothing will budge. Outta ideas
I just gently ripped off the whole piece left the screws in ordered the piece I ripped off from this same company different color made it look cooler lol the took a small screw driver in the holes where the stripped screw was widened the hole and placed it on put screws in the other ones that came out and it was like I never had a problem
When will this be back in stock? I desperately need this repaired, I was about to buy an entirely new DS Edge controller, this is obviously a MUCH better option! TYSM! :)
Jus ordered Off Amazon Thursday & got mines today , about to fix it now
tomorrow
It's in stock now! If your Amazon is out of stock, you can order it on exr.gg/3Xmqq3f
I’ve had my controller for 3 days and my right paddles not working already and no warrenty this some bs
@@chennigaming9963is that the original socket in the controller socket or this replacement part?
Your new back button kit is an absolute godsend. Had the same issue with that small metallic part that keeps breaking. Do you know if the new version of the DS Edge has improved the durability of that black metallic part in which you insert the paddles? I think I have to get a new DS controller as the module for the back left button has worn out and doesn’t work anymore. I played too long with the dodgy broken back paddle.
We tried to improve the material of the metallic part, so hopefully will last longer than the original one. We found they try to solve this problem on the new version as they use 2 plastic pieces to substitute the 2 tiny metal rods, not sure if it works but we inspected 3 new DS edges, and all of them are missing at least 5 screws inside of the controller, and the metal bar between the LB & RB also missed. We were stunned lol
Absolutely not....bought my first 1 not even a month ago. right back button is shot out....bought another 2 days ago....same button is already gone....most expensive CHEAP POS. I swear!
Been waiting for a long time for a clicky trigger kit for the edge, will it be released before the end of the year?
We will try to work it out before October!
Yo! Please… come up with a way we can add 2 more back paddles to the dual sense edge! That would be clutch asf… please and thank you!!! 🙏🏾
We are working on it, we will help you beyond the EDGE! Stay tuned!
@@ExtremeRate when it will be released?
APPARENTLY Sony updated the internal components of the Duelsense Edge, so this repair kit wont with everyones. Best to open your controller first to see if this repair kit is even viable fit 😢
My controller broke earlier this week. The actual button on the green grid is broken. It doesn’t press down like the other side. The dot in the middle wasn’t in place. I think the medal piece it sits on went flat. It gives the clicking sensation if it’s still flexible. Where do I find the new green grid piece this sits on?
just got my dual sense edge and the right paddle already stuck
You guys are awesome 😎
Thank you!
Are you guys making a stick module replacement in the future?
Preferably one with hall effect joysticks, as that you won't need to keep paying Sony for crappy ones that get drift very easily.
Do you guys have the moudle itself like the green board?
We are working on it, please stay tuned
Yeah my paddles are fixed back in place, but my right paddle doesn’t click, cause the green board is not reacting like the left one
ExtremeRate, how many days is the mouse click triggers ps5 Bdm 040 released
The inventory is on the road, please wait for a couple of days, sorry for the delay
Well done extremerate ❤
Thank you.
Is sold out 😔 when is going to be available again?
tomorrow
Anyone had issues with the battery after the swap.
Oh, two things. I think on FB a while ago I asked if you will ever have paddles like you do for the Xbox controller for the DS5 and I think someone replied that you're working on it. Is that still happening? Will you also be doing a mod for the DS5 Edge trigger stops so there's even less pressure input? Just a thought. Not an issue for me personally but I know the Edge got rated lower on YT reviews because the trigger stop settings weren't as short as other pro controllers. I believe you are the guys that could fix that. Lol!
Idk about these stuff but I messaged them on fb about Hall effect units for the dual sense edge and they said they won’t make it. I also asked if they are making a 4 button replacement instead of 2 button for the pro controller and they said they are working on it but it’s gonna take a while
Yes we are working on the buttons style back paddles kit for the dualsense controller, just not going smooth because we have to make them good to press and easy for installation, so it will take a while. And we are working on another paddles style solution. For the trigger stop clicky kit, we are working on it, please stay tuned.
We recently made a big break through on our Hall Effect thumbsticks kit, so anything is possible on the DualSense Edge.
@@ExtremeRateWill the Hall effect thumbstick modules be only for the edge or the normal dual sense too? And when is the expected release date? Curious so that I know whether to buy an edge or keep my normal dual sense with your back button kit since Hall effect thumbstick modules would be amazing
@@ExtremeRate that would be awesome, also if you can adjust the tension that'd be out of this world.
The problem with mine isn’t regarding input, but just that the paddle sticks when pressed and it’s extremely inconvenient. Does anyone have a fix for this i’ve tried cleaning and compressed air etc or do i just have time to replace it
Mine felt the same way, it's a little plastic piece that's broke. Once you press the paddle it doesn't reset so you can press it again. I got this kit and fixed my back left side, and also did the right side since I had it all open. Everything works fine now.
Heard you guys might be working on something for the psp??? 👀
Replacement shell for the PSP! (NOT the PS Portal)
Are we ever gonna get a redesign for the rise 4 back buttons
We are working on 2 new 4 back paddles for the DualSense, and 1 for DualSense Edge
Is this a permanent fix? Cuz mine has broke 3x now and I keep having to send it back to Sony
probably not until someone makes that piece in all metal. Depending on how hard you are on it might get a year out of it. I know some guys who have had their edge for over a year with no problems, mine lasted 9 months. I got the kit and just fixed everything myself, took 20 min and then I don't have to wait to get it back from Sony, so for $20 Canadian it's cheap and it fixes the issue.
update: everything installed. one f the paddles works but feels a little loose. any recommendations?
Did you replace all of the parts included in the kit?
Sheeeet I guess my dualsense edge must be a newer revision? My controller has a slightly different internal layout and my back button modules are a totally different shape. Also my controller doesn't even have that metal bracket bar... Unfortunate...
Really? We will look into that!
We've got the newer version of the DS EDGE! And we found our replacement module fit on the newer model! We are going to make a new video to show how. BTW, we got 3 new version Edge, and all of them are lack of screws and the metal bar, if that's how Sony cost down, it will be a shame.
Btw I appreciate you guys reaching out, I've had nothing but positive things to say about extremerates. I'm in no rush, my back buttons currently work fine, I just enjoy taking stuff apart.
@@Digital_Dirt Thanks for letting us know the new version and we've worked out the new tutorial now ua-cam.com/video/ueYsRDJCAjY/v-deo.html
Tbh I don’t know where my kit is, and this is pissing me off, my paddle is jammed and not sure what to do without my kit
Can you tell me if the dualsense CFI-ZCT1W model is compatible with the rise4 kit?
Please check this link to identify your controller version and choose the correct version of RISE4 kit. extremerate.com/blogs/replacement-guides/how-to-identify-ps5-bdm-010-bdm-020-bdm-030-and-bdm-040-controller
When this will be back in stock?
Hey, do you have any recommendations on gamepads for fps games? Explicitly for CoD Warzone, it has to have back paddles but at the same time, not cost 200$
I installed the 2 back buttons on my dualsense and it gives me an edge in fps games since I can sense i outperform others
Extremerate plz restock them
Already sold out.... Please make more
We will restock them as soon as possible
Wow awsome . I have two edge controllers because my first one broke, but at least I could fix it now.
We made it because gamers report this to us, so please keep providing suggestion for us! Thank you
Same here LOL
Hello! I bought this kit to try to fix my controller but I found out that there is a biggr problem. As this broke within 6 months of use and there were no replacements back then. I kept using. It broke the bubble like button inside. It seems that this is what pushes the back button back once you press on it. I can still use it but the back button is very sensitive. It appears that this part inside the controller can be removed easily but I couldn't find any replacements and your kit does not come with this replacement. Are you guys working on a replacement any time soon? If you an provide an email address so I can send a picture please. That will be great. Thanks!
U GUYS R THE BEST THANK YOU FOR MAKING THE PARTS BEEN WAITING FOR THIS SONY R BUNCH OF AHOLES
Are anymore kits available? My back right paddle is sticking and i feel like the magnet is going dead in it. Can you guys help
It's not the magnet, this the little plastic piece that's broke, mine felt the same way. I just got this kit and fixed my back left side, and also did the right side since I had it all open.
My module button dosent work. Do yo guys gone make a replacement button?
Do you mean the button board? We are working on it!
Will the clicky trigger kit fot the edge be adjustable or a static and will there be a click bumper option?
It will be adjustable, only the shortest trip is clicky. And we are still looking for a good way to put the clicky bumper.
Hello ExtremeRate. I would like to know if the Dpad can be assigned to the Rise4 Remap Kit paddles?
Yes!
@@ExtremeRateWell, that was a decisive argument
Where do you order the kit
Amazon for me
Where can I buy
Please check the description of the video
Can you guys pls send me a black duaksense edge back piece the grips for me are not very good on the normal I really want you guys grips
Where I can buy this part?
Please check the description of the video
I have two screws that won’t come out what should I do
Are they stripped?
@@ExtremeRate they were but I got it now
@@Receviin how did you get it out man? I'm having the same problem
@@ExtremeRate Having the same issue, any recommendations? I can't get the screws out
Give the people the smart triggers before we freak
ASAP!!
It's out of stuck in aliexpress i only can buy it from there😭😭
tomorrow
En AliExpress dice que no hay existencias 😢 vivo en gran canarias y aquí no llega Amazon
Lo sentimos, los repondremos lo antes posible.
@@ExtremeRate muchas gracias por responder muy amables
@ExtremeRate sigue sin disponibilidad en AliExpress ni en Amazon España, xq eso ya hace más de 1 mes de su salida al mercado por favor🫶🙏
@@kalawey1627 Please check this exr.gg/3Xmqq3f
@@ExtremeRate hola muchas gracias por responder, esto sirve para comprar desde España disculpe !
We want smart trigger stops!!! 😭
Please stay tuned!
こういう商品を待っていました
Let's go!!!
I don't like alu paddles, bc they are constantly electrocuting me while gaming... they are very static!! LOL
Then you need our plastic 4 paddles, please stay tuned!
@@ExtremeRate Yes, when are they available?
Finally
:D
@ExtremeRate can you please tell me if i purchase your clear xbox thumbstick replacements. Will xbox style kontrol freeks fit on them if they do i will purchase some cuz i got ripped off with ones that are too small to fit with kontrol freeks
Yes our xbox thumbsticks are compatible with kontrol freek
Without you guys, there would be absolutely no reason to buy these crappy PS controllers.
I bet you guys could easily build a better pro controller than Sony has.
It's a major design flaw, but the only issue I've ever had with this controller. Its easy to do the repair, and IMO cheap for the kit. The good news is you can replace the sticks once you get stick drift, and if you had a scuff, or something else, once it breaks or gets drift it's garbage, so at least with this you can get good milage out of the controller. It's like buying a nice car and having to repair the brakes.
PS5 Edge is a big fail - overpriced controller.
The price is quite fair (except the thumbstick) but 2 paddles are the fail
@@ExtremeRate Bad battery, only 2 back paddles, problems with back buttons (paddles), stick drift, back rubber grip problems, overpriced = FAIL 🙂
Now we have more reason: On the newer version of the DS EDGE, they saved at least 5 screws and 1 metal bar inside of the controller, that's rediculous.
It is sold out please how to buy them i was waiting for that piece 🥲🥲🥲🥲🥲🥲🥲🥲
Since the last video i was waiting for you to help provide them 😢😢😢😢😢
We will restock them as soon as possible, we did not realize there are so many gamers have this issue 🥲