@@FarmerFpv Yeah, driven well it would probably outrun anything that's been there so far. Grindhards Odyssey would probably be even faster on that course. Especially with Ethan driving it. Except that it's blown up right now lol.
I have to say, I’ve been tuned in to your channel for a few years. You have always done great work, but you’re definitely on a whole new level these days! Keep up the crazy good work and keep climbing that ladder!
You beat me to the comment!! Lol This is by far his best build . The simplicity and attention to detail. With awesome creativity bro . Im blown away . Keep up the great work!!!👍
That thing is so sick, I'd love to take it for a ride..... I'm so stoked to see what it's gonna look like after he puts on body panels and the wing, that's gonna make it look so legit.
Yep there high rpm so don't gear it to high or it will bog bad at low speeds mine will go 50+ in first gear and little over 100 in 3rd and it's pretty crazy at that speed on dirt but congrats on getting it going and great vid!
One tooth down in engine sprocket is like going up 3 in the back that would lower the gear ratio if you want it higher do opposite go up in front sprocket good job tho pretty sick i like seeing younger people doing quality work.
@@marcelwk Oh cool! I’ve wanted to visit for years and years but haven’t been able to. Seen some photos of a few places in a magazine that were gorgeous and wanted to visit ever since lol.
I agree. The steering seems super tight (in a good way) as well so a road course would be a blast. I’d also like to see it with a long travel suspension setup and running a desert course too.
The lap times would suck on a pavement track because you need just as good brakes as the power you carry. These guys that build cross carts on UA-cam use a single central brake which is fine on dirt as it breaks loose. He would have to put a rotor and caliper on each wheel to run decent timed laps. People seem to forget how important braking is to be fast and to control sway for traction on the front tires. They also are using cheap calipers and rotors. They would not last a lap with good traction without overheating.
@@FarmerFpv That’s VERY true and you’re spitting facts…but I’m pretty sure we’re all just wanting to see it on the track lol. Not really too concerned about lap times at the moment. 100% right on the calipers though. Cheap ones would be smoked, and warped AF, on the first lap.
DAMN!! Sounds insane and seems to be performing very well! 175 deg is awesome on the temp though. Thats about what my MT-09 runs in the winter in AZ as long as I have airflow. I cant recall if you put a fan on this but thats actually what I was thinking the whole time you were doing donuts. The engine will heat up during something like that but since you're not moving forward no air is flowing over the radiator and you'll over heat fast without a fan. It's crazy how much your temp is regulated on a sport bike just having 45+ mph air ramming through it's radiator. My bike can drop 15 degrees easy just leaving a stop light and getting some air flow.
That thing runs phenomenal. I don't think I'd make it any faster. That gearing looks good to me. You may think it runs out of gear quick, but we want to keep watching your videos. Bravo.
Damn your buggy sounds mean!! Impressive work sir. I got my hands on a GSXF-750 buggy years back, it's an absolute riot! I've got a video on it if anyone enjoys these sweet machines!
That is awesome dude, I love how low and wide it is, yet it still has alot of travel, those rear tires are like the perfect mix, keep up the good work broski
Damn, that was a really laid back cop. Thats how they all should be. Shout out to all the rad cops out there! Great job buddy. I always say it, you get better and better every edit you drop. Respect.
awsome job ! i have the samish setup i use foa 16 inch traval coilovers and have a artic cat thundercat 900 motor . mines torn down and geting a new chassis . i copied a baby rocklizard with 4 link front and rear , jeep axles , suzuki samuri t-case with dics brakes on the outputs of t-case , stainless steel drive shafts , btk bogmax tires on 14 x8 beadlocks . waiting on driveshaft for the front to finish . i corkscrewed 2 steel shafts on the rocks so . keep up the good work !!
good on you mate.. thats a great build.. I had a cbr250rr engine in my buggy.. but no good for dirt here.. gome to a 28hp robin v twin... the cop was cool..
Absolutely awesome! This has got to be your greatest build yet - you crushed the engineering and fabrication. You might consider some fenders (at least up front) to keep the roost out of your face!👍 Keep doing what you do!
That is the most badass cross cart I’ve ever seen built on UA-cam. I’d be willing to bet it would give a professionally built one a run for its money. Don’t get me wrong I’m a huge cars and cameras fan but this thing blows theirs way out of the water. Awesome job vasily.
It is beautiful, amazing build, sounds wicked. I own (not bragging and not apologizing) Polaris RZR-800s. I cannot imaging the power of your ride. The 800s scares me at times... even at 1/2 the power. Your engine tune is really great. KUDOS man, great job!!!
Bro that thing is sick! My R1 dropped a valve in cylinder 4 and I’m looking to rebuild and do a buggy build for my next project. Definitely some inspiration for my build on your channel.
Awesome build dude. Not sure if you were planning on it but wouldn't hurt to more bracing on the halo part of the cage. Those two front bars look like they could twist pretty easily if you roll it. You don't need anymore trips to the hospital!
Excellent build...! Nice Cop🚔...! I'd want Nylon Racing Car Window Net on both sides and probably thick metal mesh on windshield area. If you have some sort of malfunction or human error on or off the road that thing could be bouncing 15 ft in the air multiple times....! Without protection you could get injured or killed by being impaled by something or landing on a rock....!
Vasily: "sorry for the wind noise"
Crosskart: 10000+ rpm perfection
Great fab work dude; that thing has to be boat loads of fun 🤘
Yes! Can't wait to get it sorted
Way more fun than a boat haha
Really cool build. Hearing that motor howling makes me want a sport bike again.
I want to see this thing on the cars and cameras track it would destroy the leader board, lol.
@@FarmerFpv Yeah, driven well it would probably outrun anything that's been there so far. Grindhards Odyssey would probably be even faster on that course. Especially with Ethan driving it. Except that it's blown up right now lol.
@@Lucas12v I see you are also a UA-cam viewer of taste 👌 lol
I'm 62 this month and I can say I'm proud of you young man...Very Cool...
Thumbs up for us "oldtimerzz" 🔧😎👍 65
I have to say, I’ve been tuned in to your channel for a few years. You have always done great work, but you’re definitely on a whole new level these days! Keep up the crazy good work and keep climbing that ladder!
You beat me to the comment!! Lol This is by far his best build . The simplicity and attention to detail. With awesome creativity bro . Im blown away . Keep up the great work!!!👍
That thing is so sick, I'd love to take it for a ride..... I'm so stoked to see what it's gonna look like after he puts on body panels and the wing, that's gonna make it look so legit.
Looks and sounds so sick! Let’s take it to the sand dunes with some paddle tires. 🤙🏾
Or Busco Beach for Mini Mayhem.
Wow, you weren't joking about the F1 sound! 😎
Your fabrication skills are sick! That’s one hell of a machine and it sounds incredible, nice work!
You have the best build channel on UA-cam in my opinion.
Insane fabrication skills my man 👍🙂
Badass build, loving the sound she makes.
It does not just sound like an f1 car - its fast like one also ! Awesome build !
That thing sounds fast , But more amazing is that officer 👮 Very Cool guy for sure .
Omg the time is finally here heck yeah man
Yep there high rpm so don't gear it to high or it will bog bad at low speeds mine will go 50+ in first gear and little over 100 in 3rd and it's pretty crazy at that speed on dirt but congrats on getting it going and great vid!
Coolest cop in history, think he was excited about that thing
This is your Mona Lisa..... Incredible job dude!
Put a wing on it please it will look so good 🙏🙏🙏🙏🙏🙏
I’ve been talking about building one of these for 20 years. So cool to see one
One tooth down in engine sprocket is like going up 3 in the back that would lower the gear ratio if you want it higher do opposite go up in front sprocket good job tho pretty sick i like seeing younger people doing quality work.
Jealous of your friendly cops. This would be an immediate arrest in my country. Probably would have to hand in the vehicle too. Great build man!
What country do you live in bud?
@@justincasey_grabbederpussy6756 the Netherlands
Uk too, kart would’ve been seized in a heartbeat!
@@marcelwk Oh cool! I’ve wanted to visit for years and years but haven’t been able to. Seen some photos of a few places in a magazine that were gorgeous and wanted to visit ever since lol.
@@mpr106 only of they could catch us 🤣🤣
You need to get some street tires for the front and put this thing on a track it would probably be absurdly fast
I agree. The steering seems super tight (in a good way) as well so a road course would be a blast.
I’d also like to see it with a long travel suspension setup and running a desert course too.
The lap times would suck on a pavement track because you need just as good brakes as the power you carry. These guys that build cross carts on UA-cam use a single central brake which is fine on dirt as it breaks loose. He would have to put a rotor and caliper on each wheel to run decent timed laps. People seem to forget how important braking is to be fast and to control sway for traction on the front tires. They also are using cheap calipers and rotors. They would not last a lap with good traction without overheating.
@@FarmerFpv That’s VERY true and you’re spitting facts…but I’m pretty sure we’re all just wanting to see it on the track lol. Not really too concerned about lap times at the moment. 100% right on the calipers though. Cheap ones would be smoked, and warped AF, on the first lap.
Wow! Howling Mad Machine! My compliments!
DAMN!! Sounds insane and seems to be performing very well! 175 deg is awesome on the temp though. Thats about what my MT-09 runs in the winter in AZ as long as I have airflow. I cant recall if you put a fan on this but thats actually what I was thinking the whole time you were doing donuts. The engine will heat up during something like that but since you're not moving forward no air is flowing over the radiator and you'll over heat fast without a fan. It's crazy how much your temp is regulated on a sport bike just having 45+ mph air ramming through it's radiator. My bike can drop 15 degrees easy just leaving a stop light and getting some air flow.
That thing runs phenomenal. I don't think I'd make it any faster. That gearing looks good to me. You may think it runs out of gear quick, but we want to keep watching your videos. Bravo.
Great video. The cross-car sound amazing and looks even better. That police officer was cool as hell too.
Awesome work should be proud
Cool cart and a really nice Officer. He knew what you were doing and took it chill!
I’ve been doing fab most of my life it’s my hobby and profession for 20 plus years now. You my friend did a good job
Damn your buggy sounds mean!! Impressive work sir. I got my hands on a GSXF-750 buggy years back, it's an absolute riot! I've got a video on it if anyone enjoys these sweet machines!
Man this thing is insane!
Nice build, got to say it sounds great and moves right along.
Glad to see it running sounds like a beast.
Nice build, I’ve been following you from day one. I would love to see more young people working with their hands like you do… peace ✌️
Yo Vas those flybys sound wicked AF , xlnt work 👏🏾👏🏾💯
I do have to say that is one awesome cross kart...it sounds insane! Great job
That thing sounds angry 😡sick cart 💪🏼
Cool Cop!
I remember when you first started on this thing dude it has come a long way and your fab work is excellent
That is awesome dude, I love how low and wide it is, yet it still has alot of travel, those rear tires are like the perfect mix, keep up the good work broski
Nice take it to the track and let. It rip.
Very nice one Bro
This just might be the sickest cross kart online
OMG i really wanna try this 😍😍
Damn, that was a really laid back cop. Thats how they all should be. Shout out to all the rad cops out there! Great job buddy. I always say it, you get better and better every edit you drop. Respect.
Sounds great!
It's been so cool to watch this build all the way from the beginning. I knew it was gonna be awesome as usual. Great job!
That's what kind of cart I wish I had the ability to build. That thing is incredible. It would be Epic here in Alaska. Enjoy bud that's just too cool.
This thing is insane
That was a very cool police officer and it sounds amazing!
And shot out to the police for being cool. I think I may need one of those. That sound is borderline intoxicating.
That is a masterpiece. Please stay safe, That thing f'n rips.
Man that machine rips bro, awesome build I must say, this comming from a qualified boilermaker/welder of 42 yrs 😉👍
awsome job ! i have the samish setup i use foa 16 inch traval coilovers and have a artic cat thundercat 900 motor . mines torn down and geting a new chassis . i copied a baby rocklizard with 4 link front and rear , jeep axles , suzuki samuri t-case with dics brakes on the outputs of t-case , stainless steel drive shafts , btk bogmax tires on 14 x8 beadlocks . waiting on driveshaft for the front to finish . i corkscrewed 2 steel shafts on the rocks so .
keep up the good work !!
She sounds sick dude. Freakin awesome . Be safe
Such a sick build🔥🔥
I can't get over the damn sound lol just sounds so so loud and narly lol! Awesome job dude!!
Just WOW!!!! It sounds insane bro keep up the good work
That's fricken awesome 👌👏
Show us some more of you whipping this around, I enjoy watching you enjoy the fruition of your efforts, great job man!!
I've been waiting for this for so lonh
That things a cheek flapper for sure!
good on you mate.. thats a great build.. I had a cbr250rr engine in my buggy.. but no good for dirt here.. gome to a 28hp robin v twin... the cop was cool..
Your creations are insane! Every project, gets better and better! Congratulations on another masterpiece! The F1 sound is badass!
Man you where so lucky he was a cool cop lol...
That thing is sick. Awesome job on it.
Loving the way that thing gets down the road.
I want to build one of these so bad! A 2 seat 4wd version with long travel would be sweet!
Absolutely awesome! This has got to be your greatest build yet - you crushed the engineering and fabrication. You might consider some fenders (at least up front) to keep the roost out of your face!👍 Keep doing what you do!
Thanks!
@@VasilyBuildsIs it for sell ? How much do you want for it
Looks awesome sounds awesome killer job 👍🏻
_that engine sounds healthy. great job young Vas._
This young man has talent
Nice work man !!!!! I watched this with Galaxy pro ear buds and Man did it Sound AWESOME!!!!
I always built them using big snowmobile engines, built a few with bike engine but they didn't have 1/2 the get up and go the sled engines had.
That is the most badass cross cart I’ve ever seen built on UA-cam. I’d be willing to bet it would give a professionally built one a run for its money. Don’t get me wrong I’m a huge cars and cameras fan but this thing blows theirs way out of the water. Awesome job vasily.
Fantastic! Absolute masterpiece bro🔥
"Sorry for noise"
What I mean, this thing makes a bitta wind. That's awesome bud nice work. Best of luck with the local PD...
What a weapon awesome build mate lucky that cop was cool
It is beautiful, amazing build, sounds wicked. I own (not bragging and not apologizing) Polaris RZR-800s.
I cannot imaging the power of your ride. The 800s scares me at times... even at 1/2 the power.
Your engine tune is really great. KUDOS man, great job!!!
So glad to see you ripping this thing
Best thing you built so far
Bro that thing is sick! My R1 dropped a valve in cylinder 4 and I’m looking to rebuild and do a buggy build for my next project. Definitely some inspiration for my build on your channel.
That build is awesome. I think it’s your best one so far! Stay safe.
Dude awesome build. It really has come out great so far. Your stuff just keeps getting better and better!
Awesome build dude. Not sure if you were planning on it but wouldn't hurt to more bracing on the halo part of the cage. Those two front bars look like they could twist pretty easily if you roll it. You don't need anymore trips to the hospital!
SOUNDS GREAT. You nailed it.
👍😎🔧 🏁🏁🏁🏁🏁
Nice 🚓 too
Love it!
Badass! Sounds Amazing as well!!! 🤪 And the Cop was Super chill!
Excellent build...! Nice Cop🚔...! I'd want Nylon Racing Car Window Net on both sides and probably thick metal mesh on windshield area. If you have some sort of malfunction or human error on or off the road that thing could be bouncing 15 ft in the air multiple times....! Without protection you could get injured or killed by being impaled by something or landing on a rock....!
This is by far my favorite build of yours. I'm glad that wreck didn't deter you from building. Keep it up man 😁👍
you built a mini F1 racer. NICE JOB! keep up the good work bro.
Dude a cross kart is the most bad ass thing ever
She sounds good.. Nice build
Yeahhhhhh bro that things sick you should e very proud 💯👍please be carefull 💯✌❤🙏2u@yours brother Vasily
What a ripper. What a great sound.
Love your videos, your projects, your attitude, huge inspiration for me and my simular projects, keep it up!!
Holy crap that thing is insane. What motor is in that. It sounds like pure heaven.
Sounds great
SICK... Plain and simple!
So rad!