The door is only needed because it stops the guide under spring tension. This could be solved in one of several ways: 1. Glue the door in a permanent open 2. Place a pin that the guide can rest on. It doesn’t need to be wide to hamper ammo movement, just long enough to do the job. Finding where it rests and placing the pin further in to where the guide is attached is possible. Just gotta find the sweet spot. 3. Like other people in the comments have said, cut the door. 4. This one is crazy, but possible. Get a different spring for the guide that won’t make the guide fall out of the slot when removed. These are just off the top of my head. But it is doable.
Door sliding open also seems to be responsible for pushing the magazine follower clear of the loading ramp. Note how when mag is empty the follower pushes all the way up to the barrel and is blocking the opening. Door removal will mean you need to design a new system to reset the follower when loading from empty. Probably not worth the trouble.
The door doesn't hold the white trap door thing in-place, there's a spot in the shell that does that, the door actually pulls the follower back in the internal mag so that it can be loaded. So in the end, still necessary.
The door for loading can be taken out because the white ball-flip-director-thing(whatever it is) latches into the top frame piece. This can only be seen when it’s put together. It’s designed to move past so it can be used to unjam the gun if a ball was cocked it wrong.
Old school videos what brought me to this channel in the first place. The newer format is entertaining, but it is nice to see mod guide in the old format.
Wow, really a step up compare to what we're used to in Dart Zone's blaster. Very good result with simple upgrade plus very neat system for the magazine, a little elaborate, but it seem to do the job. Can't wait to get my hands on this one
Finally was able to pick one of these up. They had like 10 available on Walmart website sold out fast. Don't know if anyone has mentioned it yet but the blaster can comfortably hold 11 and if you stuff it in can shoot 15 pretty reliably.
The noise the dart/ball makes coming out of the barrel is it screaming as it goes into dracs forest knowing it’ll never be fired from a blaster ever again 😂😂
I kept the decocking system and safety in mine, but removed only the slide ratcheting mech, and that has worked extremely well... What has helped immensely has been color loading. (N-N-N-N-N-N-N-Y-Y-O) for 10-Mag blasters, and (N-N-N-N-Y-O) for 6-Mag blasters.
@Drac , you could put the safety lock back in and wire up a switch to an tac rail mounted flashlight , of course you may need to mount tac rails to the sides, that way it's a quick on off flashlight , that's my plan any way..
You've convinced me that this is the secondary for me in an event where rival counts for more points than normal darts. I wish this had a stock but of somebody can 3D print one as 2 half that go over the sling mount?
Do you have to manually close the door, or will pushing the slide forward close it? If not, could you mod it to do so to reduce the 'problem' of leaving the door in?
Regarding the door, could you not use a dremel to remove the nub? It wouldn't delete the door but it might allow you to leave it in an always open state. I also might just be missing some mechanic of the door.
Thanks for uploading this Drac. I wanted to view your Livestream a couple weeks ago but got tied up. Hope this can be modded much like the Roughcut to include a recon/Retaliator handle and stock attachment point.
Will putting in a K25 without removing the AR improve the Liberator's performance in a noticeable matter? I'd rather not remove the AR in this blaster, as it is really easy to lose count of the ammo left in it, and dry firing the last shot happens quite often.
You can delete the door if you put somthing that stops that leaver close to its rotation point, you know what i mean?? Like limit its range going outwards
With the door, you could just cut it smaller and keep the upper part. Unless the gun can pump then what I'd do is still cut it down, but then cut Bellow it to smoothen it out so you can pump forward
it might be necessary because It could be for the trigger or what locks the plunger in place and if the spring is not there then the trigger could still work but it wouldn't work well but if it is for the plunger then it might not work properly without the spring
Okay so I stumbled across this video because I tore mine apart to repaint it for a cosplay I'm doing and accidentally knocked the parts out. And wow, I didn't realize that nerf was this huge. I'm a big paintball player and I have a lot of questions about this sport now lol. You guys seem to take this pretty seriously
It can. It can be done fairly easily stock. You'll hold the safety and trigger down and prime once, then release the trigger and prime again. Obviously the shot loses a lot of power, but it will fire doubles stock.
Personally, i dont like calling a blaster a "shotgun" if it does not shoot at least two darts (etc) at once, regardless of its form factor. A rifle which only fires one bullet at a time is not a shotgun. This blaster is kind of like 1/3 of an artemis. Looks cool though. And seems to be just a bit more powerful perhaps
![[REVIEW] Dart Zone Ball Launchers | Sentry & Liberator](http://i.ytimg.com/vi/Z-fOmFrmgOI/mqdefault.jpg)
![[REVIEW] Dart Zone Ball Launchers | Sentry & Liberator](/img/tr.png)
Saw this one live! If y'all haven't checked out one of Fangy Boi's livestreams, do it. It gets WILDIN' in there! :P
The devil works hard, but Drac works harder when it comes to dart blasters. Kudos.
The door is only needed because it stops the guide under spring tension. This could be solved in one of several ways:
1. Glue the door in a permanent open
2. Place a pin that the guide can rest on. It doesn’t need to be wide to hamper ammo movement, just long enough to do the job. Finding where it rests and placing the pin further in to where the guide is attached is possible. Just gotta find the sweet spot.
3. Like other people in the comments have said, cut the door.
4. This one is crazy, but possible. Get a different spring for the guide that won’t make the guide fall out of the slot when removed.
These are just off the top of my head. But it is doable.
Door sliding open also seems to be responsible for pushing the magazine follower clear of the loading ramp. Note how when mag is empty the follower pushes all the way up to the barrel and is blocking the opening. Door removal will mean you need to design a new system to reset the follower when loading from empty.
Probably not worth the trouble.
The door doesn't hold the white trap door thing in-place, there's a spot in the shell that does that, the door actually pulls the follower back in the internal mag so that it can be loaded. So in the end, still necessary.
The door for loading can be taken out because the white ball-flip-director-thing(whatever it is) latches into the top frame piece. This can only be seen when it’s put together. It’s designed to move past so it can be used to unjam the gun if a ball was cocked it wrong.
Old school videos what brought me to this channel in the first place. The newer format is entertaining, but it is nice to see mod guide in the old format.
Wow, really a step up compare to what we're used to in Dart Zone's blaster. Very good result with simple upgrade plus very neat system for the magazine, a little elaborate, but it seem to do the job. Can't wait to get my hands on this one
So maybe 3D print a Gap door. like what you put on top of that one Kronos. I think it came in a mod kit
Side note, I just drilled a hole on the one on my Kronos. Saved me $12, lol.
I just got into modding and I'm glad to see that plenty of people are still doing it☺️ keep up the good work my dude
DartZone always had superior plunger designs. Honestly some awesome stuff!
Finally was able to pick one of these up. They had like 10 available on Walmart website sold out fast. Don't know if anyone has mentioned it yet but the blaster can comfortably hold 11 and if you stuff it in can shoot 15 pretty reliably.
I love your videos! I love seeing all the mods because they are awesome, and the reviews so I can see if the gun is worth buying.
The noise the dart/ball makes coming out of the barrel is it screaming as it goes into dracs forest knowing it’ll never be fired from a blaster ever again 😂😂
Looks like someone's ready to storm Area 51. 😆
With a nerf gun
@@tyreldalzell1489 yes... That's the joke...
Drac, you probably won’t see this but you could glue the loading door to the priming handle so when you prime the door comes back
The pump action rival blaster I've been searching for...
This is a flawless masterpiece of a mod guide
I kept the decocking system and safety in mine, but removed only the slide ratcheting mech, and that has worked extremely well...
What has helped immensely has been color loading. (N-N-N-N-N-N-N-Y-Y-O) for 10-Mag blasters, and (N-N-N-N-Y-O) for 6-Mag blasters.
@Drac , you could put the safety lock back in and wire up a switch to an tac rail mounted flashlight , of course you may need to mount tac rails to the sides, that way it's a quick on off flashlight , that's my plan any way..
Oh good I don’t need to smash my thumb to do this mod 😅
Another awesome video
You've convinced me that this is the secondary for me in an event where rival counts for more points than normal darts. I wish this had a stock but of somebody can 3D print one as 2 half that go over the sling mount?
Noticed you left the half-prime ratchet piece in on the stream, that on purpose to help prevent issues with the hefty prime?
Would there be any way you could cut that blue door? Maybe cut a hole into it?
Lord Drac
Another super awesome and super simple mod. Keep up the great work.
Do you have to manually close the door, or will pushing the slide forward close it? If not, could you mod it to do so to reduce the 'problem' of leaving the door in?
Any active buy links would be fantastic.
That link will be active when it goes live
Now I really can't wait for this to land in my local stores! Nice guide, great vid! Thanks!
You might be able to cut the door in half, so it's effectively always in the open position.
Where do you buy the liberator at I can’t Find it any where
Sounds good to me. What would you recommend I pad the plunger head with?
I see you got the chronograph to work
Says Item No Longer Available on Walmart website. Any idea why? Or when it will be available?
why isn't this for sale anywhere?
Regarding the door, could you not use a dremel to remove the nub? It wouldn't delete the door but it might allow you to leave it in an always open state. I also might just be missing some mechanic of the door.
Thanks for uploading this Drac. I wanted to view your Livestream a couple weeks ago but got tied up. Hope this can be modded much like the Roughcut to include a recon/Retaliator handle and stock attachment point.
Anybody know why the Walmart link says it’s unavailable? Or when it may be back?
Will putting in a K25 without removing the AR improve the Liberator's performance in a noticeable matter? I'd rather not remove the AR in this blaster, as it is really easy to lose count of the ammo left in it, and dry firing the last shot happens quite often.
You can delete the door if you put somthing that stops that leaver close to its rotation point, you know what i mean?? Like limit its range going outwards
What happened to,his thumb, seriously I am curious
Seconded
Do you ever run back to those bullets that you shot and pick them back up?
Love the old skool mod guide
I like the old school mod guides!
Hey drac you should come to the first Florida Blaster Association war on the 31st of August.
I have a department at Dragoncon to run. :(
The link says "no longer available". Any word on availability? Is it Wal-Mart exclusive?
My son xL 10will not load. What can i do to fix it. Thankyou for your time.
With the door, you could just cut it smaller and keep the upper part. Unless the gun can pump then what I'd do is still cut it down, but then cut Bellow it to smoothen it out so you can pump forward
i need help. my gun jammed and i took it apart but the spring for the white lightning looking thing above the trigger. tell me if it is necessary.
it might be necessary because It could be for the trigger or what locks the plunger in place and if the spring is not there then the trigger could still work but it wouldn't work well but if it is for the plunger then it might not work properly without the spring
I’m from California and I can’t find these anywhere :( anyone got any leads on when it’s gonna hit shelves?
August 1st
Within the next month I'd guess. People are seeing them in Canada rn but not really in the U.S. I've heard August 1st being floated as well apparently
Can't find the liberator anywhere. They seem to be out of stock. Any suggestions?
yo how do you resemble your dart liberator? mine kinda folded.
Okay so I stumbled across this video because I tore mine apart to repaint it for a cosplay I'm doing and accidentally knocked the parts out. And wow, I didn't realize that nerf was this huge. I'm a big paintball player and I have a lot of questions about this sport now lol. You guys seem to take this pretty seriously
Watched the twich last night very happy with this
Look at the CLEAN Shop floor!!
Where can i find this gun? i know is Walmart but do i have to order it in online or i can go right in to Walmart and buy it ?
Are you still coming to Reno? Would totally make it out just to see you
Ill be in Reno for the housewarming, not sure beyond that...updates to follow
Standard modding guide: I sleep
Can it take a K26: rEaL sHiT
26th common I think draks the best nerf moder
U can remove the the loading flap just jut it down and glue it to keep this white lever in
Have you tried making a hole in hte door?
Was thinking about getting one, now I'm definitely getting one
I just thrifted one of these for $2.98. I never have done a mod but I might try it.
Looks so good with performance to match nice mod
Already showing as unavailable on the walmart link. ;-;
can it double prime making it more shotgunny or the barrel/plunger is too small unlike all the other rival springer
It can. It can be done fairly easily stock. You'll hold the safety and trigger down and prime once, then release the trigger and prime again. Obviously the shot loses a lot of power, but it will fire doubles stock.
Where can I get the k25 springs?
Has anybody put a k26 in? How well did it work?
Is there anyway I can get one of these in the UK?
This mod was made for Master Chief. 117 first shot after mod........
Coincidence I don’t think so
Where can you get this gun in general!?
I so confused 🤷♂️ by putting together also I need strong 💪🏻 shooting shot so far
no red or dead paint job?
Still kinda confused why he didn't use K26.....I would like to use K26 as I have several lying around, though I will buy a K25 if necessary
You could try to 3D print a door so you won’t have to open it when you reload
Mine has a scope is that normal?
minimize the door, just keep enough of the door to keep that retainer door in place, but cut off enough to let balls in
Very nice, thanks for the info on the mod!
link for the spring?
Personally, i dont like calling a blaster a "shotgun" if it does not shoot at least two darts (etc) at once, regardless of its form factor. A rifle which only fires one bullet at a time is not a shotgun.
This blaster is kind of like 1/3 of an artemis. Looks cool though. And seems to be just a bit more powerful perhaps
Duude so sick! Ordering one right now
I just did this, and its loud!!!
Damn, I really want one.
Welp, looks like I'll be scouring eBay Internationally for one of these, because Dart Zone doesn't appear to want to cross the ocean from Americaland.
Dose any one make a better grip
Only 120fps with a big boy spring like that? However that consistency is Vnice
Review the nerf elite trilogy ds-15 next
Somebody make a guide to make a dart version of it (single darts like spring thunder)
When does it hit the shelves
August 1st from what the community and Dart Zone has been saying.
Stream on twitch more often!!
I had to leave is the stream still on?
Your're right Drac 2:46
Just a heads up you spelled shotgun wrong in the thumbnail
If only this amazing gun is sold in my country.
I bet someone is in the woods taking all the darts:)
broke internals on the first shot, not to worry, gun is still functional, just doesn't ratchet when you cock it, probably a good thing tho
How so you pronounce "shotugn"
How do* ?
Well that's ironic
@@nonmicrowaveabletoad ikr😂😂
banish the 18 non-believers
I'll think about it...
301 club baby!
Buy link no work. SAD PANDA.
I wish these would be available in the netherlands! This is the first "rival" blaster that peaks my interest.
One Lucas Films commercials and a Red Robin before it could watch this.?just sayin. Never feel bad about getting paid!!