Portkeys PT5 ii 5 Inch Monitor 4K HDMI Touchscreen
Вставка
- Опубліковано 3 тра 2022
- Portkeys PT5 “ 4K30P 1920 x 1080
Monitor PT5 : amzn.to/3sc2hMC
Battery : amzn.to/39Ay1Vc
Cage A6400 : amzn.to/3MN7SRb
DJI Ronin - S : amzn.to/3ONQkGq
Ofers Amazon Spain : / amazondescontos
Portkeys PT5 5″ 4K HDMI Touchscreen Monitor Highlights
5″ 1920 x 1080 supports up to HD 4K video
500nit brightness
Wide color gamut
10bit (8+2FRC)
3D LUT support via USB input
Monitoring tools include focus peaking, false color, image flip, histogram, color temperature, custom RGB, and more
1000:1 Contrast Ratio
Key Functions
Custom 3D LUT monitoring.
Exposure tools: RGB and Luma Waveform, Zebra, False Color, Histogram.
Focusing tools: Peaking, Zooming.
Framing tools: Check Field, Grids, Image Flip, Cross Hair.
Audiometers and battery level.
Display adjustments: Anamorphic, Color Temperature, Contrast, Sharpness, Brightness, Tint, Backlight, Display Flip, Underscan .
Support Battery
Model
Sony NP-F970/F960/F750/F550
Canon LP-E6 - Наука та технологія
Thank you for this. Does pinch to zoom work?
Can it desqueeze the footage while shooting anamorphic lens?
Thank you! I've been looking for a good review of this. Does it have pinch to zoom function?
Hi, will have to check, don't remember that
what is the differance between the pt5 and this pt5 2?
Thanks
Bella spiegazione, mi interessa il braccio laterale del gimbal, dove si acquista? Grazie
Hi, could help I plug in my Sony ZV-1 into the portkeys Pt5 ii, but it doesn’t fill the screen I have tried settings on the camera & the monitor. I have black bars top & bottom, and the sides. Even when I tap the screen to take off the monitor menu. I’m I missing something?,🇬🇧
Even with 1080p I see the camera display setting, such as shutter, focus, etc.
Hi, I don't know that camera, perhaps other person reading comments might help here...
@@kaboratech thanks mate
Thank you for the instruction video. I have the Ronin SC gimbal like you but connected (USB-C) to the ZV-E10 and the Portkeys PT 5II. to TYE ZV-E10 through HDMI. When I start the gimbal it talks to the camera but the monitor stays blank and when I pull the USB-C cable of the camera the Monitor displays the screen works. Question: how can I work at the same time both is it possible? Thank you
Hello, I used with my gimbal, ronin s, monitor with battery and Hdmi to A6400, the A6400 connected to gimbal, works good, not sure understood your question.
@@kaboratech Appreciate the feedback, meanwhile I kept trying combinations and found out that if you have a ZV-E10 connected top Ronin SC (with focus motor) and Portkeys PT 5 II; and the only cable you have connected is the HDMI cable from the Monitot you can use the focus motor on Gimbal and the Protkeys PT5II monitor functions 100% the only thing I cannot use the 'Record' button on Gimbal. I am ok with that. If you have any suggestions on how to get that working I appreciate if not still thank you for trying to help
Hello! How does your monitor take to start up. Mine is about 8 seconds :(
Yes it takes a while, it's normal, don't know if it is 8,have to check.
I purchased this monitor and when I hit record on the camera, the monitor goes black and doesn’t show what I am filming. The minute I stop recording the monitor screen pictures comes back?
Your camera does not have internal recording capabilities. You cannot use a field monitor to record. Your camera is not a 10-bit or higher
I have a Lumix G7 and it does not have internal recording capabilities. The camera is a seven or eight bit. You need a 10-bit or higher in order to use a field monitor to record.
Perhaps an option on Hdmi output on your cam
@@kaboratech no option to make it work it won't.
@@kaboratech Finally got it figured out. There are a few steps needed to get the monitor to work.
I see Your copy also not show the battery status? Why ? i Got two types of batteries and none of them shows how many energy left :(
I thin it does not have that function, or I coiluld not find it, I would like to have that also.
@@kaboratech lol if it dont have it its a terrible fuck up :( Battery life indicator its a foundation of usability :(
Can this work for Sony zv e10?
Any cam with Hdmi output
What's the difference between version 1 and 2?
just some holes on the top for the hot air to escape
Bom vídeo.
Por a caso ando a namorar esse monitor.
Porreiro 👍
I find it RIDICULOUS that they don't have any BASIC REMOTE control buttons on these external monitors like PRESS RECORD / STOP ➞ WTFFFFFFFF. Seriously, I coudln't believe there is none when I got mine. AHHHHHHGR
It's not possible to control the camera from the monitor, get a remote for your Cam.
@@kaboratech not correct, some expensive models can control I heard, most likely cheaper ones will catch up soon. anyways really dumb from manufactureres not to include these functions on touch screen monitors
@@thankyouand3260 which ones can you use to control/record and stop?
@@ryanbishop3586 Sorry I don't know yet, one guy on utube said so, he didn't reply yet which
@@ryanbishop3586 Atomos Ninja V 5-Inch 4K HDMI Recorder