How to Replace Radiator Cooling Fan Assembly 2011-2015 Chevy Cruze

Buy Now!
New Radiator Cooling Fan Assembly from 1AAuto.com 1aau.to/ia/1ARF...
This video shows you how to install a radiator cooling fan assembly on your 2011-2015 Chevrolet Cruze. Radiator cooling fans keep air flowing over the radiator when the vehicle is stopped or moving slowly. They are an important piece of your vehicle’s cooling system. If yours is failing, or broken, you should replace it immediately to avoid overheating and causing more damage to your vehicle.
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaTG/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oFb/1AX...
• 13mm Wrench 1aau.to/oHn/1AX...
• 14mm Wrench 1aau.to/oHn/1AX...
• 10mm Socket 1aau.to/oaDE/1A...
• 13mm Socket 1aau.to/oaSf/1A...
• Trim Tool Set 1aau.to/oPi/1AX...
• Needle nose pliers 1aau.to/ovI/1AX...
• Needle nose pliers 1aau.to/ovI/1AX...
• T20 Socket
• Swivel
• Torque Wrench 1aau.to/oaej/1A...
• Marker / Writing Utensil
• Safety Glasses 1aau.to/omS/1AX...
• Telescoping Hood Prop Rod
Subscribe: / @trq
Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: • Chevy Cruze 2011-2015 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@geoffschulz]

I have never seen a more complicated ridiculous piece of crap design for a simple cooling fan! Thank you for your video, it was clear and concise, very well done!

[@gagerodawald7838]

Do a Chrysler 200

[@succuvamp_anna]

Oh joy, this is gonna be my weekend coming up, it took the 40amp fuse with it.
Thanks for showing as much detail as you did!

[@dustinlewis3295]

This is an amazing how to video for this operation. I cannot thank you enough for this.
Exact angles and exact bolts. Pretty much the perfect explanation imho. It would have taken me forever without it. A+

[@ashlinkem1111]

Thank you so much this video helped me replace my fan great! My fan works now and I didn’t have to pay someone else to do it!

[@delmarea_k1624]

Thank you so much!!! Your directions where so thorough, I just wish I had the drill. I had to do everything manual with a wrench or so 😭, but you saved me a ton of money, and for that I am grateful.

[@poles38]

So after watching other videos. I found that you can change this in under an hour. Without removing half the front end.
I changed mine out and it came out the top! Wasn’t hard at all!
2012 Cruise 1.8L automatic transmission
I assume this is a Stealership’s way to do it, but this isn’t how you have to do it.

[@Jonnydeerhunter]

Thank God this car is the same color as mine. I'd be lost otherwise. Lol
Thanks for the help!

[@corbinhoder3384]

This video is awesome, my only issue is, I have transmission lines above my fan. An updated video with that part would be sick. I had to basically rip my radiator fan out. About to hopefully get my new fan in.

[@AndrewRevelle]

Awesome video helped a bunch. Thank you.

[@geoffschulz]

Sorry you only have 16 likes for this video, I wish I could give you 1000. You answered every question I had!

[@toigatuning120]

Remember folks to always disconnect the battery if using an impact around air bag sensors. Also shouldn't you make sure the fan actually works before putting everything back together? Just my 2 cents. Great job explaining how to undo the wiring connectors though. Nobody does that.

[@DR-we6jk]

Is it possible to remove just resistor pack from the fan without removing the whole fan?

[@kianaCAB]

Is this in real time, not sped up at all? If so that was quick work!

[@jc4lifejc]

Thank so much for video. Just finished job and this video was very helpful.

[@frankphillips387]

Thanks for this video. Very well done and detailed.

[@keithkohl1256]

Do you have any videos on radiator fan balance or adjustments? When I turn the A/C on, and the fan start turning, there is a clicking/rubbing noise each rotation...?

[@owboky102050]

What are those 2 sensors under the cross support for that you disconnected ?

[@roger55es]

Excellent work Thanks

[@nsanemedik4674]

I just replaced my fan yesterday, u DO NOT haft to pull the from clip off, I pulled it loose from the inside and voila, took 30 minutes

[@jydog57]

OH my goodness. I don't feel so bad now on what it cost to replace on son's cruze.

[@Ismael_Arenivar]

What's between the radiator and the condenser?

[@christierose-gw2dm]

Do you have a video for a 2015 Chevy Sonic 1.4 turbo engine for the radiator fan?

[@TRQ]

+Christie Rose We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@user-db8xz4st6y]

That car is a nightmare to work with everything

[@poles38]

Who was the Idiot Engineer, that designed this.
We changed one on a Lincoln that took less than an hour. Didn’t have to remove 90% of this.

[@jmiyathompson7021]

Remove and replace cooling fan on 2015 Nissan versa

[@TRQ]

+Jmiya Thompson We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@dankdigital4058]

Need a damn cherry picker to change oil now days on these pos Chevy who designed this was a fool.

[@giver-of-grief4715]

😊z