Great video, beautiful stool. Please put your hair in a pony tail, I have personally seen someone get their hair caught in a spinning blade and it's horrific.
Loved your build and simplicity. Please pull your hair back when your on the table saw though. If it gets caught in the blade and wraps around the arbor it will pull your face right into that blade. It’s just not worth it!
I wanted to say the exact same thing. This was the first thing everyone was told on the first day in shop. Pull back Hair, make a knot or wear a hat, no scarfs, no bracelets nor necklace. Bad things happen to often.
Very nice and elegant stool, thanks for the video, it will give me something to try as well, maybe edge glue to make it a little wider, we will see...:-)
Came here to say this. There was a horrible accident at a school near me involving a lathe and long hair. You have great hair, tie it back or do whatever to keep it from getting tangled in a machine.
Hi, the stool is beautiful. To make that work, am I correct that the top and bottom of the legs are cut at 15° as well? How thick is your wood? How deep is your groove? I will replicate this. Thanks!
Great video. A couple of quick questions - What wood thickness did you use? Is is using a 2 X 12 or a 2 X 10 construction lumber? Also at about 2 minute mark you showed a neat trick for ripping straight edges. What is that aluminum bar - does it come with your saw or is there a link to buy one similar? Thanks in advance.
Gooood dayyy! I used 2x6 construction lumber. Yess the short aluminum bar came with my saw. It is actually an auxiliary fence extension. But I used it as a straight edge to straighten up my planks
Thank you. One more question if I may - how deep did you make those dados? I believe that's important because the strength and rigidity all depends on that. Again thanks for your video showing details.
You’re scaring the shit out of me with your hair hanging down by the table saw blade! I can’t help but picture it getting caught and pulling you face first into the blade. Granted, all I see are potential injuries since I stupidly cut the tip of my thumb off!
@@tobiasaki1108 Back in the day I saw the results of a woman getting her hair wrapped up in the spindle of a milling machine, after I had warned her to tie her hair back. She lost a 5" diameter piece of her scalp. Long hair and rotating machinery are a recipe for disaster.
Great video, beautiful stool. Please put your hair in a pony tail, I have personally seen someone get their hair caught in a spinning blade and it's horrific.
Thank youuuuuu! Yes sirrrr willll do that!
I was thinking the same thing. 🙃🙂
Put your hair in a pony tail......😮
Hello from Texas. Nice work, the music was just right.
Thank youuuuuuu
Loved your build and simplicity. Please pull your hair back when your on the table saw though. If it gets caught in the blade and wraps around the arbor it will pull your face right into that blade. It’s just not worth it!
I wanted to say the exact same thing. This was the first thing everyone was told on the first day in shop. Pull back Hair, make a knot or wear a hat, no scarfs, no bracelets nor necklace.
Bad things happen to often.
Thank youuuu! Got thissss! Will do exactly that hahaha
Nice build. Thank you for sharing. Have a blessed day.
Thank you tooooo for stopping byyyyyy God bless to you tooo
Nicely done! Simple and straightforward.
Thank youuuuuuu
Very nice work 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
Thank you so muchhh
Excellent video and project, looking forward to watching more of your videos and learning more. Good Luck & Hello! from Canada.
Thank youuuuuu! Will make more and better vidsss
Very nice and elegant stool, thanks for the video, it will give me something to try as well, maybe edge glue to make it a little wider, we will see...:-)
What a great stool. I love it!!
Thank you soooo muchhhh
wow... that took foreverrr
Hahahahahah i promise to make betttterrr videosss thank youuuu
Great simple project, but please hide your beautiful hair when using power tools
Hahhaha thaaaaaanks!! Yesss willl doooo
Nice work!
Thank youuuu
Looks good! Might have to make one myself!
Did you make one? I wanna seee
Nice job, please could you share the dimensions for each parts - thanks
The hair is like a Health and Safety training video from the 70s.
Nice work, apart from that.
Hahahhaahah sorryyyyy i learned from thissss thank youu
0:50
Badtrip pag kapitbahay mo may table saw tapos trip mag karpintero hahaha barena na nga lang sakit na sa ulo ✌️
Hahahahahahaha sorrryyy na poooo lagyan ko silencer lahat ahahhahahaha
Add some finish to that sweet stool. :)
Jahahahaha will doooo! Ill do this on my next vids! Thank youuu
El arte personificado en ti, bella mujer!!
Thank youu
Stools are great as art, chairs, small table, bench or work surface, cabinet installation support and a step stool. Key board table.
Thank youuuuu!! Hoping to make one of eachhhhhh!
Very nice
Jako mi se dopada tvoj projekt. Bravo!!!
PS. Koliko stupnjeva je nagib za noge?
Puno hvala!
15 degrees slope, see at 6;23 minutes
Tie your hair. It is potentially dangerous when working with power tools, specially a table saw
Came here to say this. There was a horrible accident at a school near me involving a lathe and long hair. You have great hair, tie it back or do whatever to keep it from getting tangled in a machine.
Yessss will dooo! Thanks for the tip!
Hi, the stool is beautiful. To make that work, am I correct that the top and bottom of the legs are cut at 15° as well? How thick is your wood? How deep is your groove? I will replicate this. Thanks!
Yesss the top and bottom of the legs are cut at 15 degrees. My wood is 1.5" thick. The groove is about 3/4 in atleast
Thank you for your interest!! I am touched that you are going to replicate this! Have an awesome buildddd
@@tobiasaki1108 Thank you. It’s simply, yet elegant. It will look lovely in my bedroom.
👍👍🇧🇷
She better follow the rules... Don't eat. And drink
Great video. A couple of quick questions - What wood thickness did you use? Is is using a 2 X 12 or a 2 X 10 construction lumber? Also at about 2 minute mark you showed a neat trick for ripping straight edges. What is that aluminum bar - does it come with your saw or is there a link to buy one similar? Thanks in advance.
Gooood dayyy! I used 2x6 construction lumber.
Yess the short aluminum bar came with my saw. It is actually an auxiliary fence extension.
But I used it as a straight edge to straighten up my planks
Thank you. One more question if I may - how deep did you make those dados? I believe that's important because the strength and rigidity all depends on that. Again thanks for your video showing details.
Trabalho muito bonito parabéns
Thank you sooo muchhh
You’re scaring the shit out of me with your hair hanging down by the table saw blade! I can’t help but picture it getting caught and pulling you face first into the blade. Granted, all I see are potential injuries since I stupidly cut the tip of my thumb off!
Hahaha omggg im so sorryyy ill make better videossss thanks for the tipppp
Nice job , but tie your hair back .
Hahahahhah yeppppp will doooo!
Please tie your hair back for safety. Nice work.
Thank youuuu will dooo
Dud the hair out of the blade
Got ittttt thnak youuuuu
Love it
Thank youuuuuuuu. This means so muchhh
Nice work. Safety first. Having loose flock of hair while operating any machine is prohibitive and is not a good practice. Please DON’T do it
Got thisssss! Thank youuuuuu
Dam hippies... Lol😁😁😀😀😀😀
@@tobiasaki1108 Back in the day I saw the results of a woman getting her hair wrapped up in the spindle of a milling machine, after I had warned her to tie her hair back. She lost a 5" diameter piece of her scalp. Long hair and rotating machinery are a recipe for disaster.
Why is she wearing a mask when there's no one around?
@@markr9113 Against sawdust.
Is the answer "to eat Japanise food"
Definitelyyyyyyy absolutelyyyy
My god the hair. It's lovely, but please tie it up. I've seen what happens when long hair gets caught up in spinning machines.
Got ittttttttt
@@tobiasaki1108 🙏
Japanese don't use a sandra, they use a plane to smooth the surface. That way, the cellular structure is not disturbed.
Please watch your hair when cutting around the blade bending over the saw , put you hair in a bun !
Thaaanks yeppp willl doo
lol,
How to make Chinese stool,
Eat Chinese food,😜
HAHAHAHAHHAHAHAHAHAHA
Way too much time watching the person sand the wooden boards!
Hahahhaahah noted on thissssss
To much work ... N not enuff beer n strippers!😁😁😀😀😁
Eat sushi...
Wait I thought it was "how to TAKE a Japanese stool" ...my bad.
Good oneee hahahaha
If u ever hav to glue somthin... Its a fail...
I hate silent movies!
Illl make a something with instructionssss tooo