Thank you so very much for posting this video. It was my first time putting together a bike, and I would have never succeeded without watching your video!
Why would you want to return? Mine is still running awesome. Well except that the battery drains faster now. But that is 200 mi + later. I should do a video on that! Thanks bro that gave me an idea 💡
Thank you so much me and my gf were watching the video on tv and we got it together lol we were both happy and since I got 2 putting the other was easier and faster thank you you’re the man🤙🏼 been enjoying it so far really fun
@@OgHazeKiller562 Yes you can. I did a video but Mic didn't work. It's easy. See the nuts? Loosen one nut. Pull off. Put new seat assembly on in one piece. Tighten. But of course you can swap the clamps. It's all interchangeable except for the post itself. 🤓☺️🏕️
You're welcome ☺️ thanks for letting me know. If you have any questions or comments don't hesitate. I'm planning on doing some more experimenting this week on Max battery Max average speed that sort of thing
As tricky and inconvenient as it is, you're probably going to have to loosen it to the point where that end piece is about to fall off and then slide it in and then tighten it.
Had I not gone and checked mine I would have said absolutely not mine has a slight wobble to it as well but how extreme is this wobble? Mine.5 mm how about yours
@@TheWannabeOutdoorsmanhuh interesting. Mine seems to have a little more noticeable movement than that. How much tension does your latch close with? Mine feels pretty light when securing it but it looks like it may be adjustable somehow.
@c0nn0rb0nn0nn0r If This Were Tick Tock I just respond to your comment with the video although at the moment I don't have time. Mine doesn't wiggle hardly at all unless I really bounce it about I never noticed until you asked about it. I would try tightening everything down or taking the handlebars back out and putting them back in again and make sure everything is tight
It actually depends on whether or not you have a full charge and the weight of the rider. But I am 140 lb and at Max charge it will go 21 miles an hour on flat paved level ground. And it will do that for about 6 minutes and then it drops quickly. Max speed at full charge will get you approximately 8 MI on one charge. And that's it. Your best bet is to do between 7mph and 12 mph and that will get you leisure ride and somewhere in the middle ground. Besides the short wheelbase and small wheels of that bike at 20 mph will make you crash.
Thank you 😊 It states that the battery is removable HOWEVER, I cannot for the life of me figure out how! I've removed the tail light and the control box is there. Then the seat post. Then the crossbar continues. I believe the battery is located there. I see no way to access it. Amazon sells a replacement battery specific to the EB3 but I can find no instructions as to how to get it in or out. Since the control box is accessible I can strap a new or upgraded battery externally.
@@devonharlan7 I absolutely agree! I'm planning a Q&A series. So far it's looking like 3, possibly 4 videos. I start filming it tomorrow weather permitting 🙂
From the various reviews I've seen the sellers are pretty good at sending out a replacement part. You should definitely contact the seller and let them know. My rear tire was over inflated (63psi) out of the box. Twice what it should have been. Mine would have popped too but I checked it while putting it together. You can also get no flat foam tubes off Amazon but they're a bit pricey for my taste. You also can add Slime to your tubes to help prevent future flats.
Yeah, I'm in line for that answer too. It's advertised as replaceable battery and I found the replacement battery on Amazon. Can't for the life of me figure out how to get to the battery. I've reached out by email to the company and so far they have not responded.
I don't know if you received this yet but I found this from the company that makes this bike here's the video for you dude. ua-cam.com/video/FcJoaus5CfA/v-deo.html
@@TheWannabeOutdoorsman Hey man do you need the video still? I got a google drive link from them, I can post that on like a reddit or forum somwhere. Also, what battery did you use from Amazon?
You'll need to get a replacement wheel from the seller. I haven't gone through the process but the ones on Amazon that have said it was almost painless.
Other than what you seen in this video, I don't without more details specific to your situation. I got an earlier production model than what they're selling currently. I've never had any of the regular issues others are having. It seems like with the reduced price came reduced quality. If you gave me more details I might have a solution.
I’m having a hard time attaching the front wheel. It looks like the break is tighter and thinner than the front wheel plate so I can’t get the wheel to fit in place. Please help!
Here's the video I made for you. Sorry it's not great shots and well done. I rushed it to get it to you as soon as possible. I hope it fixes the issue you're having 😊 ua-cam.com/video/lK--NJFkFcA/v-deo.htmlsi=HCNQ70NuV-I56ngb
Unfortunately no. I have a place in the dining room where the cat doesn't frequent so it's a stable connection. So far it's not been an issue except for the installation video.
You mean why your wheel got stuck? Either the brakes are too tight or otherwise improperly assembled or the motor has seized. If you've had it spinning before and now it won't freely spin even while off then something physical is preventing it. Like the brake pads or something inside the hub motor. You're not the only one who has told me this happened to them. Mine is still working properly without issue after 94 total miles. My battery isn't holding the charge as long as it did. But other than that it's working as advertised. I've even spilled the bike several times at 17-20 mph. I've pulled 100+lbs of cargo 2.4 miles a couple dozen times. I'm thinking something happened during manufacturing that wasn't up to standard. I've been told the company replaces the parts quickly. Just let them know.
@@theknockdownjay4655 There are 2 angled pieces at the bottom of that bolt that when tightened will "expand" to fill the tube and hold it tightly in place. It sounds like your problem is with that. Tomorrow if I get a bit of free time I'll make a video taking it apart and putting it back together. I want to readjust mine anyway. My only suggestion is to take it apart and put it back together. It's possible that the bottom of the two angled pieces was too loose when you put it together and has fallen off inside the neck.
In the lowest setting (10mph) if you help with the burden of getting up to speed it will last 35-36 miles on flat paved road. The higher the setting the faster it dies. On the highest setting (20mph without helping it) I was able to 8-10 miles. Also, riding on uneven surfaces drains it faster. I rode it on grass and dirt and it drained quickly. I find that riding on pedal assist 1 (10mph) not only gets me more miles between charges but is a more relaxing and safer ride. The short length between axels and size of the wheels makes it somewhat wobbly at higher speeds. It's really sensitive to movement of the front wheel and turns SHARP! 😲🫣🧱💥
Yeah, me too. $360 + $90 shipping. Several months ago. It's never had any issues for me. I've worked in factories, sometimes sh** happens. Perhaps you've acquired someone's bad day. 😞 I recommend contacting the seller and letting them know. If you wouldn't mind perhaps you could give me the details of what's wrong with your Eb3. I might be able to help you troubleshoot it. 🤓 Another viewer had "the motor seize" but turns out the disc breaks were too tight.
Yes it was. I was new to making videos. I really really hate the part when I was opening the tools and charger box! 🙄 I'm learning and updating my equipment. Slowly because money is tight and the economy sux right now. But I'm improving. Check out my battery replacement video. That one is MUCH better.
@@TheWannabeOutdoorsman Lol. Thank You. I was trying to figure out how to put my handle bars on and that part is obstructed but Thank You for the information. ❣️
@@SHAYBAYBEE I have a adjustment to handlebars video if you want to watch. It also has better video angles. Of course it was rushed in editing and I repeated myself several times. So I'll have to fix that at some point.
I intentionally disconnected mine. It's not intuitive nor safe. I've been propelled into traffic at 15+mph a few times while approaching and slowing for the crosswalk button. I've noticed that not only are my rides much more enjoyable but my battery doesn't drain as fast.
Thank you so very much for posting this video. It was my first time putting together a bike, and I would have never succeeded without watching your video!
You're absolutely welcome! Thank you for watching ☺️
Also very helpful for disassembling and repackaging for return!
Why would you want to return? Mine is still running awesome. Well except that the battery drains faster now. But that is 200 mi + later. I should do a video on that! Thanks bro that gave me an idea 💡
Thank you so much me and my gf were watching the video on tv and we got it together lol we were both happy and since I got 2 putting the other was easier and faster thank you you’re the man🤙🏼 been enjoying it so far really fun
I'm glad I could help. 😊 Feel free to ask questions and even update me on your experiences with them.
@@TheWannabeOutdoorsmananother question can I get a different seat and out it on their with the same clamps
@@OgHazeKiller562 That is an EXCELLENT question! Sometime tomorrow I will try it and find out. The key being "with the same clamps".
@@OgHazeKiller562 Yes you can. I did a video but Mic didn't work. It's easy. See the nuts? Loosen one nut. Pull off. Put new seat assembly on in one piece. Tighten. But of course you can swap the clamps. It's all interchangeable except for the post itself. 🤓☺️🏕️
@@TheWannabeOutdoorsman thank you Brutha I appreciate you I’ll try it out now I gotta figure out how to put in my car trunk lol
thanks so much for your video. the inatructions the bike comes with are VERY unclear so you helped me understand better
Thank you this is going to help a ton!!!!
If you're getting the EB3 then I also have a how to on battery replacement. 🔧🔩🚴
@@TheWannabeOutdoorsman ooohhhhh I’ll check that out tooo
Thank you for posting, your video was much more helpful than the Jasion instruction guide and video!!
You're welcome ☺️ thanks for letting me know. If you have any questions or comments don't hesitate. I'm planning on doing some more experimenting this week on Max battery Max average speed that sort of thing
It took me longer to unpack the bike then to assemble it
We have 2 and love to ride them while on camping trips
Excellent 🏕☺️ yeah if I wasn't making the video assembly would have been a breeze
The most important piece for me was missing in the video. The handle bar sliding into place. The video cut it off. Mine will not slide into place.
As tricky and inconvenient as it is, you're probably going to have to loosen it to the point where that end piece is about to fall off and then slide it in and then tighten it.
Thanks for the video!
Was just killing me to watch you putting it together on the concrete 😖
😂 Yeah, scratched it up a tiny bit. How'd you like when I just used the flimsy box to prop it up?
Very helpful thank you !!
I’ve noticed when I lock my handlebars in the upright position there is a slight wobble, like the latch isn’t fully tight. Is this normal?
Had I not gone and checked mine I would have said absolutely not mine has a slight wobble to it as well but how extreme is this wobble? Mine.5 mm how about yours
@@TheWannabeOutdoorsmanhuh interesting. Mine seems to have a little more noticeable movement than that. How much tension does your latch close with? Mine feels pretty light when securing it but it looks like it may be adjustable somehow.
@c0nn0rb0nn0nn0r If This Were Tick Tock I just respond to your comment with the video although at the moment I don't have time. Mine doesn't wiggle hardly at all unless I really bounce it about I never noticed until you asked about it. I would try tightening everything down or taking the handlebars back out and putting them back in again and make sure everything is tight
I cant get the front weel on, well i got it on but the disc is basically rubbing against the caliper thing
You'll need to loosen the caliper. Sometimes they come that way from the factory especially the newer models.
What’s the max speed because in the description it says 21 but the pictures it says 19
It actually depends on whether or not you have a full charge and the weight of the rider. But I am 140 lb and at Max charge it will go 21 miles an hour on flat paved level ground. And it will do that for about 6 minutes and then it drops quickly. Max speed at full charge will get you approximately 8 MI on one charge. And that's it. Your best bet is to do between 7mph and 12 mph and that will get you leisure ride and somewhere in the middle ground. Besides the short wheelbase and small wheels of that bike at 20 mph will make you crash.
@@TheWannabeOutdoorsman ahhhh ok thank you
Yourtutorial 19:22 presentation is very well done and as a result most informative. Thank you.
Thank you😊
Is the battery removable? Thank you good video
Thank you 😊
It states that the battery is removable HOWEVER, I cannot for the life of me figure out how!
I've removed the tail light and the control box is there. Then the seat post. Then the crossbar continues. I believe the battery is located there. I see no way to access it. Amazon sells a replacement battery specific to the EB3 but I can find no instructions as to how to get it in or out.
Since the control box is accessible I can strap a new or upgraded battery externally.
@@TheWannabeOutdoorsman thank you for the reply! I think i will be going that route too.
If/when you do a battery upgrade i think another video would be cool 😉
@@devonharlan7 I absolutely agree!
I'm planning a Q&A series. So far it's looking like 3, possibly 4 videos. I start filming it tomorrow weather permitting 🙂
That was actually smart.
Plugging it up during assembly.
Still like that little thing !
I'm thinking about getting a small gas generator to put in the trailer and charge it while riding it 🤔
@@TheWannabeOutdoorsman That would be interesting 👀
I got a flat tire the first time i used it is what do you recommend i do?
From the various reviews I've seen the sellers are pretty good at sending out a replacement part. You should definitely contact the seller and let them know.
My rear tire was over inflated (63psi) out of the box. Twice what it should have been. Mine would have popped too but I checked it while putting it together.
You can also get no flat foam tubes off Amazon but they're a bit pricey for my taste. You also can add Slime to your tubes to help prevent future flats.
How do you replace and remove the battery on the jasion eb 3? You need to do a video on that. A lot of people I know have questions about it.
Yeah, I'm in line for that answer too. It's advertised as replaceable battery and I found the replacement battery on Amazon. Can't for the life of me figure out how to get to the battery. I've reached out by email to the company and so far they have not responded.
I don't know if you received this yet but I found this from the company that makes this bike here's the video for you dude. ua-cam.com/video/FcJoaus5CfA/v-deo.html
@@TheWannabeOutdoorsman Hey man do you need the video still? I got a google drive link from them, I can post that on like a reddit or forum somwhere. Also, what battery did you use from Amazon?
@@en_vy I didn't actually get the battery. Just where it was on Amazon.
I'd like to see the videos yes.
@@en_vy here's the Amazon link for the battery
Jasion EB3 Battery 36V 7.5Ah a.co/d/1zBLtyC
Today I got my Bike and did everything I had to do. The Wheel got stuck and won’t move. Wheel wont spin. Just frozen.
You'll need to get a replacement wheel from the seller. I haven't gone through the process but the ones on Amazon that have said it was almost painless.
😭 i thought i was the only one dropping the bike 😂 great video…….💯🫡
@@mannyfresh1706 I've dumped it several times since then 😁
Any tips for attaching the headlight? I cant get it to stay
Other than what you seen in this video, I don't without more details specific to your situation. I got an earlier production model than what they're selling currently. I've never had any of the regular issues others are having. It seems like with the reduced price came reduced quality. If you gave me more details I might have a solution.
I’m having a hard time attaching the front wheel. It looks like the break is tighter and thinner than the front wheel plate so I can’t get the wheel to fit in place. Please help!
Here's the video I made for you. Sorry it's not great shots and well done. I rushed it to get it to you as soon as possible. I hope it fixes the issue you're having 😊
ua-cam.com/video/lK--NJFkFcA/v-deo.htmlsi=HCNQ70NuV-I56ngb
Thank you
Did you figure out a solution for the really loose charging port?
Unfortunately no. I have a place in the dining room where the cat doesn't frequent so it's a stable connection. So far it's not been an issue except for the installation video.
When i put the front wheel in the brake stops it like 50% how do I fix that
Here's my quick video on that. ua-cam.com/video/lK--NJFkFcA/v-deo.htmlsi=GR_CxX0Ulmxn_PZc
Any idea why this happened?
You mean why your wheel got stuck? Either the brakes are too tight or otherwise improperly assembled or the motor has seized. If you've had it spinning before and now it won't freely spin even while off then something physical is preventing it. Like the brake pads or something inside the hub motor.
You're not the only one who has told me this happened to them. Mine is still working properly without issue after 94 total miles. My battery isn't holding the charge as long as it did. But other than that it's working as advertised. I've even spilled the bike several times at 17-20 mph. I've pulled 100+lbs of cargo 2.4 miles a couple dozen times.
I'm thinking something happened during manufacturing that wasn't up to standard. I've been told the company replaces the parts quickly. Just let them know.
Having trouble getting the handle bars to stay locked in. Any suggestions?
It’s as if the bolt is too big
So you're talking about the folding neck part or the quick release on the horizontal bar?
@@TheWannabeOutdoorsman The folding neck part. It’s supposed to lock into the hole but it’s almost like the bolt is to big to big screwed in.
@@theknockdownjay4655 There are 2 angled pieces at the bottom of that bolt that when tightened will "expand" to fill the tube and hold it tightly in place.
It sounds like your problem is with that. Tomorrow if I get a bit of free time I'll make a video taking it apart and putting it back together. I want to readjust mine anyway.
My only suggestion is to take it apart and put it back together. It's possible that the bottom of the two angled pieces was too loose when you put it together and has fallen off inside the neck.
@@TheWannabeOutdoorsman understood, thank you
I just got mines today are the fornt tire supposed to screech
No. Could be that you need to adjust your breaks with the included hex wrench.
@@TheWannabeOutdoorsman appreciate it now it isn’t making that sound as much👏🏾
@LaCosaNostra007 Excellent! 🚵♂️
how did you put the back spoiler on?
You'll see that at 1:45 into the video it was pre installed by the company.
Does anybody know the bolt size for the front wheel ?
I personally don't know, but later this week, I'll ride up to Ace and have them size it.
@@ChenaeLoren As promised, I stopped at Ace and got it sized. The axel or bolt size is ⅜ fine thread on the front. Hope that helps! 😊🏕
Ooo....kkk....fam....I can follow u....but what ur showing me and what's on my bike ain't lining up as far as the front tire....and the washer part
So you're saying that it came assembled wrong? Are you able to get it assembled correctly like I showed?
How much miles does it go until the battery is dead
In the lowest setting (10mph) if you help with the burden of getting up to speed it will last 35-36 miles on flat paved road. The higher the setting the faster it dies. On the highest setting (20mph without helping it) I was able to 8-10 miles. Also, riding on uneven surfaces drains it faster. I rode it on grass and dirt and it drained quickly.
I find that riding on pedal assist 1 (10mph) not only gets me more miles between charges but is a more relaxing and safer ride. The short length between axels and size of the wheels makes it somewhat wobbly at higher speeds. It's really sensitive to movement of the front wheel and turns SHARP! 😲🫣🧱💥
depends on gears
good video
Thanks for watching 😊
Bought it off of Amazon for $300
Yeah, me too. $360 + $90 shipping. Several months ago. It's never had any issues for me.
I've worked in factories, sometimes sh** happens. Perhaps you've acquired someone's bad day. 😞 I recommend contacting the seller and letting them know.
If you wouldn't mind perhaps you could give me the details of what's wrong with your Eb3. I might be able to help you troubleshoot it. 🤓 Another viewer had "the motor seize" but turns out the disc breaks were too tight.
@@TheWannabeOutdoorsman I am sorry but my might return them
We got two for me and my brother they both broke
@@gurmansandhu1016 😲
@@gurmansandhu1016 Understandable.
Broke the first day it came
😞 Did I get the cream of the crop? What happened? Explain further if you will. 🏕️😊
@@TheWannabeOutdoorsman The bikes brakes keep going off my dad fixed but then stoped in the middle of the road again.
@@gurmansandhu1016 is it possible for you to video the problem so I can see?
Terrible camera range
Yes it was. I was new to making videos. I really really hate the part when I was opening the tools and charger box! 🙄 I'm learning and updating my equipment. Slowly because money is tight and the economy sux right now. But I'm improving. Check out my battery replacement video. That one is MUCH better.
@@TheWannabeOutdoorsman Lol. Thank You. I was trying to figure out how to put my handle bars on and that part is obstructed but Thank You for the information. ❣️
@@SHAYBAYBEE I have a adjustment to handlebars video if you want to watch. It also has better video angles. Of course it was rushed in editing and I repeated myself several times. So I'll have to fix that at some point.
Do you have a tutorial on replacing inner tube in back tire? I cannot for thr life of me find a tutorial for the jasiom eb3
Great question. I've not had the need to swap it with a new tube. Now that you mention it, I should. No I don't have one yet.
@@TheWannabeOutdoorsman Appreciate the response!
Really useful thank you!
Glad to hear ☺️
I just got mines today are the fornt tire supposed to screech
Same issue 😂😂 I damn sure ain’t taking it apart and sending back of it ain’t
@@DeeSweat716 Real one🤣🤣
Any update on yours my pedal assist is not working at all
I intentionally disconnected mine. It's not intuitive nor safe. I've been propelled into traffic at 15+mph a few times while approaching and slowing for the crosswalk button. I've noticed that not only are my rides much more enjoyable but my battery doesn't drain as fast.