Це відео не доступне.
Перепрошуємо.
Freightliner Cascadia clutch transmmision rear main seal motor mount removal replacement part 2
Вставка
- Опубліковано 16 гру 2017
- Now accepting support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
__________________________________________________
Freightliner Cascadia clutch transmmision rear main seal motor mount removal replacement part1
• Freightliner Cascadia ...
Freightliner repair playlist
Freightliner videos: • Freightliner videos
Warning
Always use the proper tools and safety equipment to perform this job.
Failure to do the job correctly can result in catastrophic engine damage and serious injury or death.
__________________________________________________
Radio station: 96.7 FM Kcal rocks IE
#franciscoamaya #franciscoamayafreightliner
Great video 📹!
I love you thank you so much for this video
Awesome job man. I like that you you remove and install the clutch with the transmission. I've always done clutch replacements like this on all makes and models as I've found its easier to bar the engine around bolting the clutch up rather than trying to thread the needle stabbing the transmission. The only thing I do different is a Haldex 2 piece clutch brake for the oops moment when the clutch pedal hits the floor when the truck is moving, it's easier to replace a 2 piece rather than cutting the broken 1 piece clutch brake out. I hope you keep helping people fix Cascadia's with Driptroits. I've got a ton of experience with the DD engines and Cascadia's and am DTNA certified and still find many of your videos useful and entertaining.
Thank you brother.
That makes me happier. 😎😊👍
Fuulerr eoton şanzıman
Your are the man. You are helping us alot. Thank you so much.
Excuse me, maestro can I ask you a question? I'm starting out in mechanics and I like to learn what I can and I wanted to know how many pounds of torque it gives to the bolts that hold the transmission to the engine?
Or could you tell me the torque specifications for this transmission job?
Buenos videos
Muy buen trabajo
Great video Francisco
That wear indicator is a great feature! Great videos! I've been watching a bunch of them over the past few days. Thinking about getting a Cascadia.
You so awesome mechanic thankyou
Amazing video !
Thanks for sharing, God bless
Gracias amigo Bueno trabaja De iraq 🇮🇶
Awesome job
Oyes Francisco disculpa voy aser un travajo de un clutch en un dd15 x primera ves ya estoy buscando la heramienta para instalar el sello pero k usastes de guias para el flywheel me paresia k eras las puntas de los brake chambers?
Now I'm going to pick up load 👏
Velocity Knoxville says it is 23 hours of labor to replace a clutch including flywheel + input shaft + engine mounts + a 5" bellow exhaust pipe. Is that in line with the official work hours from Freightliner?
Hola Francisco todos tus videos son muy profecionales, me gustaria saber donde esta tu taller y si tengo que hacer una appointment para que veas mi cascadia 2013 tengo mucha vibracion pero cuando agarro un bache deja de vibrar y otra vez despues de un rato vuelve a vibrar
Hola amigo buen video una pregunta se pueden subir todos los clutch de 15” de esa forma? En la transmisión y atornillarlo al último?
Si, Los camiones regulares es un poco mas facil.
What do you torque the flywheel bolts to
1/2 impact with lock tight
Where the wabco slave cylinder mounts into truck there is like a big keyhole slot on the bottom...is there supposed to be a rubber plug or something that fits on there? Mine is open with grease caked around
Hi Francisco I noticed the access plate to the clutch is missing after a shop resealed the flywheel housing . Do you think its a good Idea to leave it open any help will be much appreciated
Bien Hecho, cuánto tiempo tomó para hacer este trabajo completo?
Como 10 horas haciendolo correctamente
I put new slave valve but it doesn’t push the fork all the way out so the solo clutch tap doesn’t move to new the pedal feels nice and hard but doesn’t i took all the air out.
Did you replace the clutch with a new one?
Is it necessary to remove the transmission to change the rear motor mounts or is it just easier that way? Im getting prepared to change them to the new style with the new brackets. Thanks for all your videos Francisco. You have saved me a lot of money on labor costs.
Francisco es mejor poner un clutch nuevo ho uno recontruido .. te agradeseria si contestaras mi pregunta gracias
Nuevo es siempre mejor.
Fransisco, I had the same work done. Used my same clutch but now it only goes down half way and gets hard. Mechanic tells me it's my clutch which is only 6 months old. Or my clutch master cylinder which was working fine before transmission was replaced?
How to rotate flywheel of cascadia to remove clutch bolts?, because there is no space in front of engine to rotate the flywheel
Sown a video of motor mount change on Cascadia 2012 tanks
Hello Francisco! I have DD15 2016 mileage 570k. Do I need to replace a clutch or service transmission. Never done before. Thanks in advance
Hello, u do the best videos on how to work on cascadias. Well My mechanic is doing this work on my truck and he’s having a lot of problems trying to get the flywheel out. What do you suggest?? Next thing he’s going to do is get heat on it to see if it get lose... anyway I’m getting a new flywheel... please let me know thankssss
He needs to use the same clutch bolts in the flywheel to pull the flywheel up and down, up and down, up and down,...
Until the flywheel comes out, it hard but it is the easiest way to do it.
What a Wonderful man!!!
God Bless you brother!
You are such an Amazing person....
I would like to visit your garage please....
Put me the address here....
Thanks....
I would like to know if I can bring my truck to your shop?,do you give out that information..you are one helluva Technician 👨🔧
Me2 how do I get the information?
What tool did u use to install the rear main seal . There so many don't want to over pay
For one if I can get one for cheap
That clutch brake only has one side that has friction material. Doesn't it need to face the transmission? I could be wrong. The two piece brakes usually have both sides with friction material.
The one piece clutch brake has to side friction material.
Question. Where can I get torque specs for the flywheel and clutch plate? I imagine contacting the dealer right? The flywheel bolts, are they supposed to have oil on the threads or anything?
Was the transmission broken, why not just change the clutch? Great video thanks keep them coming
Yes, one gear was going neutral while running.
Francisco Amaya Thanks
Buen video.gracias por compartir me sirve de mucho esta informacion estoy por instalar un clutch de Este tipo.podria llamerte para una o unas preguntas?
How much is cost for clutch and acuactor DT12 automatic ?? My mechanic charge me $5,300
That clutch is extremely expensive but I still think that is a little over.
Hello. If I want to replace clutch. Do I need to drain the antifreeze? Thank you.
If I'm climbing a hill and loses a lot of power is that my clutch or flywheel going bad
Only if you see them the RPM jump up and the truck is not getting any speed.
Nice vid. Is it the same procesure for automatic transmission? Changing just the clutch. Can you tell how far of removing trany would I go, since you said no detaching from frame is necessary. And what seal press I need to use, part number please. It is a detroit trany. Thx
DT12 RIGHT?
@@franciscoamayaYT right
Nice job man keep going. What is the cost of the replacement transmission
Between 800 - 1400 dollars. It depends on the vehicle.
Very good work, but you forgot to mention that this job takes about a week, or more to complete, especially by a novice mechanic, also it has to be done on a hard floor surface, preferably concrete, cause some guys will try doing directly in the grass and then they realize the jack and the truck just dug into the ground and they can't move it or even lift it anymore!
Yeah,Thats coimmon sense, You dont need much brain to figure that out, And a week? Even a novice should take 3 days tops with all parts there including doing motor mounts......I get it done in a day,10 hours
Dumb question. How do I get the clutch out of the transmission
Step? Or what do you mean?
Endonde se encuentra tu shop....
My 2014 Cascadia Volt Oil Pressure & Trans Gauges goes haywire sometimes while driving.No codes. Any idea what's causing the problem?
It is possible that you dashboard is not working properly.
Do you have the multiple gauges dashboard or the stock one?
Francisco Amaya Stock
Oh, ok.
That is a one piece dashboard, you cannot replace the gauges individually.
If there is not check engine light and the engine runs fine, you will need to replace the dashboard.
Francisco Amaya Ok thanks appreciate it
How are you. My question is Climbing a hill the rpm goes up but im not getting speed, I have replaced the clutch. But still the same. Any idea?
What type of clutch do you have?
Automatic or manual adjust?
If it is manual it could need an adjustment.
I have a solo clutch. The fly wheel is been cut with new clutch. Still slipping. Do you know if the fly wheel unproperly cut cam can cause it??
Yes, it is possible that the flywheel is not resurface correctly.
Also, it is possible that the clutch could not be the right one for the truck.
Francisco Amaya thanks you. God bless you
Can you please send me the info on where I can take my truck to you. I have a 13 cascadia that has a couple of issues.
how do you rotate the flywheel on the dd15? I know other engines have a tool to insert but I don't see it on my truck.
Yes, there is a tool but it is not necessary to have.
Just remove the flywheel service plate and rotate it with a screwdriver, the way I did in this video.
Legal420 now!🎅
how much is cost ?
7.5k +/-
How much is it to do a clutch job?
This particular job was $7,500.00, but just I clutch replace can cost around $2500 if you replace most of the components I replaced on this video.
Where is your shop located?
My shop is located in Fontana CA
Ohh man fontana ca, thank you for all your videos
Kind of wish it was in Miami
I want something get done my truck where are you located
I want something get done in my truck where are you located
hate automatic clutches... cheaper EverTough Eaton clutches perform better and last longer.
You're a he'll of a mechanic
What transmission oil do you use?
Mobil delvac SAE 50 synthetic transmmision fluid.