Building a VersaTube VersaFinish Shop in My Backyard

Поділитися
Вставка
  • Опубліковано 23 гру 2024
  • This is the reason I haven't been able to post any car videos lately. I'm building my dream shop in the form of a 24x36x12 VersaTube metal building. In this video, we'll go through the process as I learn how to do it.

КОМЕНТАРІ •

  • @Texas_Takeover
    @Texas_Takeover Місяць тому +15

    You should add "Versa finish" to the title of the video.
    A lot of people are probably searching youtube for this style. I found this video by accident but was looking for versa finish videos a few weeks ago without much luck on detailed videos. This is definitely the best one

    • @tfrasca142
      @tfrasca142  Місяць тому +3

      Thanks, and good call on adding Versa Finish. I wasn't sure how popular this style would be compared to your average Versa Tube.

  • @AdamArcher-hs3gp
    @AdamArcher-hs3gp Місяць тому +48

    I was watching this on my tv on a guest account and I was so impressed that I had to come and comment. I have never seen a creator of your size and the editing skill of a bigger content creator. I don't know how I was recommended your Channel, but I'm glad I was.

    • @tfrasca142
      @tfrasca142  Місяць тому +4

      Wow, that's cool to hear. Thanks!

    • @imakedookie
      @imakedookie Місяць тому

      @@tfrasca142 but its a fact. true content right here

    • @Rustyhinged
      @Rustyhinged 23 дні тому

      Agreed! You have so much potential man, please keep posting 🙏🏻

    • @philipherring6981
      @philipherring6981 18 днів тому

      Did you put a barrier between truss and concrete

    • @tfrasca142
      @tfrasca142  18 днів тому

      @@philipherring6981 Yes, I used a foam sill gasket.

  • @lancecluster
    @lancecluster Місяць тому +15

    Have seen ads for these buildings for years. Neat to see one go up. Well done video. Thanks

    • @tfrasca142
      @tfrasca142  Місяць тому +3

      Same here. I was slowly worn down by the ads and eventually just had to try it.

    • @lancecluster
      @lancecluster Місяць тому

      @@tfrasca142 You certainly made it look easier than I am sure it actually was. Looks like it will work out well for you.

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      @@lancecluster Yeah, it's been a ton of work to get it to this point. And now it's time for all the fussy little details that are going to drag the process out. But I'm excited for the finished product.

  • @wipatriot510
    @wipatriot510 9 годин тому

    Great DIY video, clear, concise and without a lot of unnecessary jibberjabber...

  • @sambrown8224
    @sambrown8224 Місяць тому +5

    I have this exact kit coming. I also plan on wood sheathing. Thanks on posting so I know what to expect.

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@sambrown8224 nice. The Versa Finish thing is relatively new from VersaTube, so you don’t see many of them yet. Glad this was helpful.
      What kind of siding will you use?

    • @sambrown8224
      @sambrown8224 Місяць тому +1

      @@tfrasca142 I'm planning on using the ZIP system to seal it all up and then cover it with siding to match my house.

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      @@sambrown8224 That ZIP stuff looks pretty cool. I was planning on doing that until I found out that I could just use T1-11 without sheathing underneath, and save a couple thousand bucks.

    • @sambrown8224
      @sambrown8224 Місяць тому

      @@tfrasca142 That sounds like a great idea

  • @bretkindsvatter3574
    @bretkindsvatter3574 Місяць тому +1

    Came here for ifted 944, stayed for Volvo engine rebuild...and now here for this too! Great channel

  • @stevebreland389
    @stevebreland389 Місяць тому +2

    Wow! Well done, both the construction and the video. That lift is absolutely the way to go. My knees were crying thinking about the up and down ladder trips required. Looking forward to the completion. Thanks.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Thanks! I’m already looking forward to the next time I have an excuse to rent a lift. Maybe when it’s time to install the roll up door…

  • @Vassenden_yt
    @Vassenden_yt 11 днів тому

    I have no intentions of building a similar structure, but I loved the video. Clean, easy and chill. Without ever seing your channel before this video had already won me over, and then you mention the Volvo stuff. It's like I want to subscribe, then unsubscribe just to be able to subscribe again.
    Great work!

    • @tfrasca142
      @tfrasca142  11 днів тому +1

      Thanks! Glad to see there’s some overlap between metal accessory buildings and turbo bricks.

  • @DonDomel
    @DonDomel Місяць тому +5

    absolutely my type of content - dream garage :) greetings from Poland !

  • @ironside8seven807
    @ironside8seven807 17 днів тому +2

    Great video, I am in the process of buying a place, but it has an HOA, so the details on a versafinish install are really helpful. Would be great if you can share your all in cost when it is all said and done.

    • @tfrasca142
      @tfrasca142  15 днів тому +2

      Yeah, I'll try to tally it all up when I'm "finished". Goal is 30k.

    • @johndeninger8905
      @johndeninger8905 8 днів тому +2

      Why would anyone buy into a HOA 😵‍💫😵‍💫😵‍💫

    • @ironside8seven807
      @ironside8seven807 8 днів тому +1

      @johndeninger8905 it is very common where I live, even in rural areas. I got a really good deal on a new build with some acreage, more space for less money than a used home. The good news is that the rules are fairly relaxed.

  • @clementdallaire6254
    @clementdallaire6254 26 днів тому +1

    Yo my dude! Really happy to have your channel recommended today, great video and incredible editing. I'm currently in the process of constructing a small 14x16 workshop and the marathon finish before winter sets in is a challenge. Couldn't do it without the help of my father and some friends. Cheers mate!

    • @tfrasca142
      @tfrasca142  26 днів тому +1

      Thanks! Glad to commiserate with others who put off shop builds until fall…

  • @jordancaleb5790
    @jordancaleb5790 Місяць тому +2

    Great video! You answered my question on how to do one with proper siding rather than roofing on the walls like they are always shown

    • @tfrasca142
      @tfrasca142  Місяць тому +2

      Thanks! Yeah, I was on the fence about these until they came out with the Versa Finish option. After having built it, though, I bet it would be cheaper to just get the standard one and add extra 2x4 wall girts.

    • @jordancaleb5790
      @jordancaleb5790 Місяць тому +1

      @tfrasca142 i bet but it will look much better though! Not a fan of roofing sheet metal everywhere, want to use something like hardy board so it can match house that i dont have yet😄 but hoping it all matches and i like how hardy board looks too

  • @ALMX5DP
    @ALMX5DP Місяць тому +3

    Great overview of the initial process. Seems very doable, if a bit time consuming for a single individual with only occasional second/third hands. Planning on something similar in a year or two but likely will only do a 12x21 or so. Maybe that size will be easier to manage. Looking forward to how it progresses.

    • @tfrasca142
      @tfrasca142  Місяць тому +2

      Glad it was helpful. A 12x21 should almost be doable solo. Definitely if you get a scissor lift. Have fun with your project.

  • @rcdogmanduh4440
    @rcdogmanduh4440 Місяць тому +3

    Oh great another dyi idea! I can see the look on my wife's face! Very nice !

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@rcdogmanduh4440 Sorry about that!

  • @jrc9555
    @jrc9555 21 день тому +1

    Love your choice of music 🎶 brother. I do enjoy jazz, but don't get to hear it much on UA-cam. 😮x

  • @Reject06
    @Reject06 16 днів тому

    Really enjoyed the vid. Can’t wait to see it finished up

    • @tfrasca142
      @tfrasca142  15 днів тому

      Thanks, more to come soon!

  • @shortattentionspangarage1312
    @shortattentionspangarage1312 Місяць тому +1

    Excellent! Thanks for introducing me to a non-attached garage option I never new existed.

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@shortattentionspangarage1312 I’m here to serve.

    • @chaseblue3970
      @chaseblue3970 Місяць тому +1

      Bank accounts will not thank him 😂

    • @tfrasca142
      @tfrasca142  Місяць тому +2

      Now that you've watched this video, I bet you'll start getting VersaTube ads thrown at you from every direction. That's how they got me.

  • @robw7205
    @robw7205 6 днів тому

    Came for the shop, stayed for the other content. Win/win.

  • @kbeckley22
    @kbeckley22 Місяць тому

    I’m looking at doing a 24x36x12 versatube shop as well! Great video, can’t wait for the rest of the build!

  • @Bruceanddenise
    @Bruceanddenise 28 днів тому

    Thanks for sharing this man. Appreciate you showing the details.

  • @VONDOOM88
    @VONDOOM88 28 днів тому

    Very cool video. I am looking forward to the rest of the build videos! Good job man!

  • @Andy-rp3ee
    @Andy-rp3ee Місяць тому

    Fun stumbling on your channel! Enjoying the cars and this build!

  • @Sendrim
    @Sendrim Місяць тому

    Amazingly well made video! Stoked to see the continuation! :)

    • @tfrasca142
      @tfrasca142  Місяць тому

      Thanks, glad you enjoyed it!

  • @chromaventure
    @chromaventure Місяць тому +5

    About time… so much room for activities

  • @treynewton9381
    @treynewton9381 Місяць тому +3

    Scissor lift, plywood leap frog got my like.

  • @idiotluggage
    @idiotluggage 13 днів тому

    Really cool. Thanks for sharing this.

  • @jtcustoms1182
    @jtcustoms1182 29 днів тому

    Great video. Im on my second versa tube building and will definitely use the marking tip while the frame is on the ground. Was a pain doing it after. Now you got me thinking on full osb i stead of just strapping.

    • @tfrasca142
      @tfrasca142  29 днів тому

      Yeah, marking the trusses was a good call. I assume you like your first VT building if you’re building a second one, so that’s good to hear.

    • @jtcustoms1182
      @jtcustoms1182 28 днів тому

      @tfrasca142 The guy I dealt with was great. Everything was clearly marked. Nothing came close in price either for me. Had my drawings so passed inspection easily. I'm on forming inspection today.

  • @onefortheroad2291
    @onefortheroad2291 Місяць тому

    Been considering one of these for some time now. Very well done video buddy. I just subbed. Based on the numbers and the size of your channel, a lot of folks agree with me!

  • @telecomwiz2004
    @telecomwiz2004 Місяць тому

    Bro, thanks so much for making this video. It's incredibly helpful!

  • @davidbo5823
    @davidbo5823 12 днів тому

    I just finished my versatube 12 by 36 RV shelter last September. It is enclosed on three sides with the front open and a man door in the back. I was able to build it completely by myself, but being 66 years old, it took me longer than I expected.

    • @tfrasca142
      @tfrasca142  11 днів тому

      I’m impressed that you were able to raise the trusses alone. Well done.

  • @hugoortiz8846
    @hugoortiz8846 Місяць тому +1

    I'm so pumped for you!

  • @GrandTouringConcepts
    @GrandTouringConcepts Місяць тому +3

    Great video and should make for a fine shop, -subbed to see it through!

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@GrandTouringConcepts thanks!

  • @Hopalong..75
    @Hopalong..75 Місяць тому

    I made several call to Versa Tube and I have to report the experience was less than positive. Calls had to be redirected to other departments, engineering had to be involved. I had planned on building a very similar building to yours 7:19 . But they just couldnt get the job done. After about three weeks I eventually gave up and contracted a local company that built the steel frame to order, poured the concrete, and assembled everything for about the same price as I was quoted for a tube frame that did not reflect what I asked for.
    I am happy that your project went well.

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      That’s a bummer, but it sounds like it worked out pretty well for you in the end. My experience with VT customer service has been ok, I guess. I had some questions they couldn’t answer about the VersaFinish kit, since it was “a new thing” for them. I really wanted overhangs and the ability to use wood sheathing on the roof and sides, and none of the local garage/carport type contractors could do that for me.

  • @blh3741
    @blh3741 12 днів тому

    My complements on your installation and videography. Are you doing a follow up on the final phases of the build? Thanks!

    • @tfrasca142
      @tfrasca142  11 днів тому

      Thank you. I’m working on the next video now, but I’m in the fiddle little details phase, so progress is slowing down. I want to get the video out this month, though.

  • @eugenevdwalt7067
    @eugenevdwalt7067 17 днів тому

    Thanks for a amazing video!!!

  • @lab8560
    @lab8560 Місяць тому

    Great video! Love all your stuff

  • @edwardchandler1187
    @edwardchandler1187 Місяць тому +1

    Great build, when will the continuation be posted?

    • @tfrasca142
      @tfrasca142  Місяць тому

      I’m pretty much working on this thing in real time, so I hope to have the second video out in a couple weeks. Frame inspection is scheduled for Monday, then I can start sheathing the sides and progress should happen quickly from there.

  • @AGreatIndoorsman-me
    @AGreatIndoorsman-me Місяць тому

    So badass, Tyler.

  • @gregmueller9736
    @gregmueller9736 27 днів тому

    I was debating going with a Versatube building (25x36x10, hoa limits me to 900sqft😢) Ill have to get a hold of them to see if a 10' lean-to is possibe with one of these. Great video and I look forward to the next one!

    • @tfrasca142
      @tfrasca142  26 днів тому +1

      I’m pretty sure there’s a lean-to option in the configuration thing on the VersaTube website.

  • @GooseGuyHonk
    @GooseGuyHonk Місяць тому +1

    Great Video. Love the edit

  • @NykevOfficial
    @NykevOfficial 15 днів тому

    Curious how thick is your cement slab?
    Great video, thanks for sharing as I’m looking to build my own shop like this. Please do a second video, would love to see how it turns out.

    • @tfrasca142
      @tfrasca142  15 днів тому

      Thanks, glad it’s relevant to your interests. I have a second video in the works.
      Slab is 4” with a 12x16” footer. Also one section that’s 6” thick where the lift will go.

  • @MrPoisonedcookies
    @MrPoisonedcookies Місяць тому

    Always good to sheath your walls first for strength and then the roof sheathing, definitely good to go 5/8 sheathing on your roof if the span is 2’ on center. But I’m jealous, I want to to build one

    • @tfrasca142
      @tfrasca142  Місяць тому

      I would have done walls first if I was doing this is the summer and it was guaranteed to be dry during the entire construction process. But having a roof first has been really nice. I asked the VersaTube people if it would be structurally sound this way and they confirmed.

  • @ElementX32
    @ElementX32 Місяць тому

    Sir, you just earned a new sub. Nice video and awesome job.

  • @Daniel-nx7zh
    @Daniel-nx7zh 6 днів тому +2

    I’m still waiting for part 2!!

    • @tfrasca142
      @tfrasca142  6 днів тому +1

      Me too! I have what I would call most of a video edited. Just need to wrap up a few things.

  • @zippyslug31
    @zippyslug31 Місяць тому

    Hello fellow Oregonian! Just stumbled over this vid. Reminds me of the cold-formed/extruded building I put up a couple years ago; similar size as well. The CF construction process is slightly different in some ways, but the overall process looks to be pretty similar. Gives me a bit of PTSD watching you put in the self tappers! ha Was surprised to see you are going with OSB/T1. I went with metal sheathing, both roof & walls. My building is fully batt insulated so it took some head scratching to determine how to do it, but mine turned out pretty good and no condensation so far. I'm in Central OR tho and in a drier climate (your trees suggest you're in the valley) but even heating/cooling inside doesn't cause issues.
    Looks good; subscribed and looking forward to your progress.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Yup, I'm right on the Willamette. We have a small garden shed with all metal siding and roof and the condensation is insane in there in the winter. I'm sure I could have used metal siding panels and insulated enough to prevent condensation there, but for the roof I really like the more solid decking that the OSB under the metal provides. I wasn't crazy about walking around up there with just the metal panels.

    • @zippyslug31
      @zippyslug31 Місяць тому

      @@tfrasca142 I honestly was sketched out by the idea of walking around on that thin metal roofing, but honestly once you put a couple of starter screws in, to hold it to the purlins, it's shockingly stout. I had to do a lot of walking around up there and it doesn't even deform as best I can tell... and I'm a fairly large dude, too! It's been engineered to take snow loads so it's going to be a lot stronger than we'd ever imagine using such thin material.

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@zippyslug31 That's cool to hear. Are your roof panels 29 or 26 gauge.?

    • @zippyslug31
      @zippyslug31 Місяць тому

      @@tfrasca142 Good question; I had to look this up on my quote. 26G. A few other 'specs' from my supplier's quote in case it's useful to you (I'm not sure what some of it means tho): "20 psf ground snow load, 20 psf min. roof snow load. 120 mph wind speed, exposure ‘C’. 2018 IBC"

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      @@zippyslug31 Nice. Before I decided to use OSB roof decking, I was going to get 26g, but with the OSB, I was able to order 29g and save a bit on the steel. Are those specs for the roofing material or the frame of the building? Versatube built the frame of mine to the appropriate wind and snow loads, but I didn't think roof material used specs like that. I think my building is 41.4 psf ground snow, 25 psf roof snow, and 124 mph winds. Well over what my area requires.

  • @connerkuhns.
    @connerkuhns. Місяць тому +3

    This is my kind of content.

  • @FishyEngineer420
    @FishyEngineer420 Місяць тому +2

    He’ll yeah, you’re my hero 😂

  • @AndreKaut
    @AndreKaut 28 днів тому

    When do you think your next video will be posted? I'm considering building one of these so this is great!

    • @tfrasca142
      @tfrasca142  28 днів тому

      Thanksgiving and weather are going to slow things down, but hopefully I can have a meaningful update in 2-3 weeks.

  • @samuelarduino
    @samuelarduino Місяць тому

    Impressive Giant Erector set! why not putting in reliefdoors in the roof and anchored X braces along the walls like in norwegian barns to be hurrica proof? you have sales in Europe ?

    • @tfrasca142
      @tfrasca142  Місяць тому

      I’m in the Western US, so no hurricanes. But it is rated for 124 mph wind (though I have a hard time believing that). Anchored x braces are self-explanatory, but what are these relief doors in the roof?

    • @samuelarduino
      @samuelarduino Місяць тому

      @ Hi the reliefdoors can relief over or underpressure so the roof can't lift off in extreme winds, normally hinged on the top and swinginging both ways and sized relative to interior volume

    • @tfrasca142
      @tfrasca142  Місяць тому

      @@samuelarduino nice. That’s kind of what I figured, but have never seen them here in the US.

  • @ntme6506
    @ntme6506 10 днів тому

    What's the wind load rating on that building? Hope you will do a cost breakdown when you're done.

    • @tfrasca142
      @tfrasca142  8 днів тому

      124 mph. I plan on doing a total cost breakdown, as depressing as that will be.

  • @glennmorris9893
    @glennmorris9893 Місяць тому

    Great video Tyler…
    What is the snow load rating for this??? I’m in Ontario, Canada.

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      25 psf roof snow, and I think 40 something ground snow. I told them where it was being built and permitted, and they make sure it meets the specs. Sometimes they have to put the verticals 4’ OC instead of 5’, or they make the knee braces really long.

  • @georgef1176
    @georgef1176 Місяць тому

    This is the best way to build a garage. I have basically the same setup but with metal exterior. My family builds houses for a living and still we couldn’t come close to the cost savings of a metal building. I actually almost went even cheaper and got a hanger style building, those are super cheap as far as building a garage goes.

    • @tfrasca142
      @tfrasca142  Місяць тому

      I looked at those hangar/quonset hut style buildings too. They're cool but I didn't want to lose that much space on the side walls. I also have a max height restriction with the city, so to make it tall enough for a lift off to the side, the middle was going to be like 20 feet tall.

  • @chriscoesbodyshop
    @chriscoesbodyshop 23 дні тому

    Nice work

  • @leifhietala8074
    @leifhietala8074 Місяць тому

    Oh, a guy rocking a SAAB? Subbed.

  • @robertodebeers2551
    @robertodebeers2551 29 днів тому

    Excellent video/demonstration. Pro tip: A pair of strap-on knee pads is a great investment. I use mine all the time.

    • @tfrasca142
      @tfrasca142  29 днів тому +1

      Thanks. I actually have a set and can't stand them. I do sometimes use a foam pad that makes kneeling on concrete much more enjoyable.

    • @robertodebeers2551
      @robertodebeers2551 29 днів тому

      @@tfrasca142 Try "No Cry" gardening knee pads. They're red and black in color. I'm on about my fourth set.

  • @ehrichsj
    @ehrichsj 20 днів тому

    Do you feel like this was more affordable or easier than doing this with the traditional stick framing?

    • @tfrasca142
      @tfrasca142  20 днів тому

      I think stick built framing could have been a couple thousand dollars cheaper than the VersaFinish frame. But I would have had to find a local engineer to draw and stamp all the plans, whereas the VersaTube process has that step included for a better price than sourcing it myself. Now that I’m doing the siding, I do wish the framing was wood. So many self-tapping screws…

  • @Low760
    @Low760 Місяць тому +8

    It's funny that this is considered strange in the states. Kit sheds are the normal thing in Australia from stratco etc. They use c channel extrude and i have a single truss every 2.5m. most builds over there are timber for some reason? Also we love corrugated galvanized sheets in the suburbs. And we use tin roofs with reflective insulation rolls. I don't get why you use wood.

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      I wouldn’t say it’s strange, but it’s definitely nothing I’ve ever done before. I don’t know why we use so much wood for framing over here. Maybe something to do with the availability of timber? The main reason I’m using wood siding and OSB under the roof is to cut down on condensation, which is a huge issue with metal siding.

    • @deadlata9767
      @deadlata9767 Місяць тому +5

      Who made up that these are strange in the US? Metal frame out buildings are everywhere near me. The US isn’t a small European monolithic fiefdom as much as people in other countries try to imagine it is. Different areas will have different building methods used. US and Canada have massive timber resources and industries making building with lumber common. The cost of material, speed to build, resistance to condensation, and how easy it is to make alterations vs other construction methods can contribute to its use.

    • @operator8014
      @operator8014 21 день тому +2

      This is pretty normal in a lot of the U.S..
      Other places will opt for timber framing due to local costs.
      Australia and the U.S. are basically the same, but we made good vehicles illegal.

  • @adamsegal2258
    @adamsegal2258 Місяць тому

    Really curious how the permitting process went for this

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      I contacted my city with the basic dimensions of the building, and they said it’s permittable, but that I’d need to provide stamped engineering drawings. So with that info, I got the slab poured and ordered the frame kit. Versatube charged me about $700 for the drawings, which took about a month. As soon as I forwarded those to the city planning department, the permit was issued. Framing inspection is on Monday, and I don’t expect any problems.

  • @PlayscBricks
    @PlayscBricks Місяць тому

    Always wondered about these kits. Thanks for the info. I still think "Dream Shop" is over used on youtube. If it was a dream shop you would not be building it. I like to call it a realistic shop build. I am in the middle of my 60'x60'x20' realistic shop build. The car lift went in yesterday. Great video.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Different people have different dreams, and I enjoy building things myself.

  • @lanakimanatou
    @lanakimanatou Місяць тому +1

    Extend the deck on the sissor, and load 3-4 sheets on the extended deck. Than unload them where needed. Less time going up and down with a single sheet of wood. But nice job.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Ha, I realized the deck extends right as I was ready to return it to the rental place. Classic.

  • @Busydadgarage717
    @Busydadgarage717 Місяць тому

    This is awesome! Estimated total cost with concrste and all materials?

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      I’m hoping it’ll come in just under 30k. But that may be optimistic. Definitely considerably more expensive than just getting a standard VersaTube with all metal siding.

    • @Busydadgarage717
      @Busydadgarage717 Місяць тому

      @tfrasca142 I can appreciate that. I live in a neighborhood that would be very upset by just a metal building in my yard. I would unfortunately have to go your route as well.

    • @tfrasca142
      @tfrasca142  Місяць тому

      I get it. I don’t live in an HOA or anything, but I still thought an all metal building with no overhangs would look out of place.

  • @xephael3485
    @xephael3485 16 днів тому

    What did this cost? Doing it in wood seems like it would cost a lot more and probably last just as long

    • @tfrasca142
      @tfrasca142  15 днів тому

      Wood is definitely more expensive, even though I’m using relatively cheap t1-11. Not sure on total cost yet, but it’ll probably top 30k.

  • @K20C2-Slow
    @K20C2-Slow Місяць тому

    Great video, production quality is top notch! Just curious though on estimated cost of the project so far

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      Thanks. So far we’re around 20k, with most of that being the foundation. Trying to budget 30k, but it’s looking like we may go over a bit.

  • @Savannahjbo
    @Savannahjbo 26 днів тому +3

    hahahaha , this made me stop to comment .. hahaha " But the phillips head screw WILL strip out if you look at it wrong " hahahaha epic ..

  • @KevinCorapi
    @KevinCorapi 28 днів тому

    How much did the slab cost, and specs?

    • @tfrasca142
      @tfrasca142  28 днів тому +1

      I want to say it was 11k. 23x36 with a 12x16” footer. 4” thick except for 24 sq ft of 6” where the lift will go.

  • @assamite9614
    @assamite9614 Місяць тому

    can you post the video when you are trying the put insurance on the building?

    • @tfrasca142
      @tfrasca142  Місяць тому

      You know, that part hasn’t even crossed my mind. Thanks for the reminder.

  • @DonDomel
    @DonDomel Місяць тому +1

    3:18 - this is was I thought before you said it - and my second idea was industrial WAX something from WURTH company.

    • @tfrasca142
      @tfrasca142  Місяць тому +2

      @@DonDomel that’s a good idea. So far I’ve been wiping down any small rust spots and spraying WD40 on them for temporary prevention.

    • @DonDomel
      @DonDomel Місяць тому

      @@tfrasca142 try to find in your country/city kind a anti-corrosion industrial wax. Few weeks ago I was waxing aluminium football gate for my son. Looks exactly as your garage - join by join block. But I wax all screws and holes.

  • @sweetpotatoes1749
    @sweetpotatoes1749 Місяць тому

    Can you tell me how you did the concrete pad? Cost?

    • @tfrasca142
      @tfrasca142  Місяць тому

      I paid a contractor 11k to do that. It’s 4” thick (6” where the lift will go) with 12x16” footers. Rebar grid 18” OC.

  • @bassface84
    @bassface84 21 день тому

    Nice!

  • @charlyRoot
    @charlyRoot Місяць тому

    Why did you cut the top of the tree off?

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      It dropped a couple really big limbs and was getting dangerous. Not to mention, we were spending 4 months of the year picking up hundreds of apples a week of the ground. We were going to take it down to the stump, but the arborist thought it might live if we just chopped it 1/2 way up. All the leaves that are on it now have grown since it was cut, so it looks like it'll live for a bit longer.

  • @bt8143
    @bt8143 Місяць тому +1

    Charlie Brown called... he wants his music back!!!!

    • @tfrasca142
      @tfrasca142  Місяць тому

      That’s the first “I don’t like your music” comment that’s actually been funny. But luckily for you, there’s a lot of other music that you can use for your own videos. Hope this helped.

    • @operator8014
      @operator8014 21 день тому

      Wouldn't it be Linus that called?

    • @tfrasca142
      @tfrasca142  21 день тому

      @@operator8014 Honestly, if I could afford some real Vince Guaraldi tracks instead of this royalty-free stuff, I'd be pretty psyched.

  • @bigjav240
    @bigjav240 Місяць тому

    How thick is the slab?

    • @tfrasca142
      @tfrasca142  Місяць тому

      4” with 12x16” footers, rebar grid at 18” OC. And there’s a 6” section where the lift will go.

  • @jamesbuchanan2840
    @jamesbuchanan2840 25 днів тому

    Why buy this when I can order one with all the precut metal siding and roof with all trim nneded?

    • @tfrasca142
      @tfrasca142  25 днів тому

      If you want metal siding and don’t want any sheathing under the metal roof, then order that one. I got this one for the reasons mentioned in the video.

  • @dcviper985
    @dcviper985 Місяць тому

    If a person knew how to run a MIG welder I wonder if that would save any time/weight compared to all those self tappers?

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      Yeah it would probably be faster. I don’t know for sure, but I bet the VersaTube people would tell you that it’s designed to have some flex in the joints that are screwed. Also, it’s all galvanized so you’d spend a bunch of time grinding it down to clean steel.

    • @FlawedOffroad
      @FlawedOffroad Місяць тому +2

      welding that much galv would be a nightmare, the fumes are toxic and make ya sick

    • @dcviper985
      @dcviper985 Місяць тому

      I guess that just shows you that everything In know about welding I learned on UA-cam

  • @bertveldhuizen8699
    @bertveldhuizen8699 27 днів тому

    #705 You would think they designed that a little better?

  • @RandyZimmerman-pp5wj
    @RandyZimmerman-pp5wj Місяць тому

    Even though I'm handicapped I still could do a lot of the work now if I just had a house lol

  • @shawnlindemood6678
    @shawnlindemood6678 Місяць тому +1

    Sorry, I could only watch half of this. I'm going to start over and watch this with my wife. Thanks jerk. lol

  • @aaadamt964
    @aaadamt964 Місяць тому

    Im stubborn and expect to do everything myself but itd probably be cheaper and quicker to pay amish or whoever to build a stick frame for me. Id still go this route if it saved me $3 .

    • @tfrasca142
      @tfrasca142  Місяць тому +1

      @@aaadamt964 I’m the same way. In fact, I got some quotes for similar metal buildings, installed, for less than I’m spending on this. But they didn’t have any options like overhangs or alternative sheathing, so I went the stubborn route.

  • @joell439
    @joell439 Місяць тому +1

    👍👍👍👍👍👍

  • @tgood5527
    @tgood5527 27 днів тому

    It will strip out if you look at it wrong. Boy do I feel that.

  • @mississippi4589
    @mississippi4589 29 днів тому

    👍🏾👍🏾

  • @caseydman4651
    @caseydman4651 23 дні тому

    No pitch on that slab....good looking garage though!

    • @tfrasca142
      @tfrasca142  23 дні тому

      Do you mean it should be pitched so the water drains out of the door? I wish I had known more about any of this when I paid to have the slab done. Would have definitely asked for that.

    • @caseydman4651
      @caseydman4651 22 дні тому +1

      @@tfrasca142 Yessir, usually pitched towards the door, usually the contractor would talk about it but its another task for them to make sure it's pitched, either pitched towards the door or a drain in the floor that just gravity feeds out the back to get the water off the slab. You can always cut and plum a drain in the floor if it gets too bad but it might not even be a problem so no sweat

    • @tfrasca142
      @tfrasca142  21 день тому

      @@caseydman4651 Like I usually do, I went with the lowest bid on the concrete, and they definitely didn't mention anything about drainage. If I ever build another shop, that's one of the many things I'll do differently.

  • @paulvanhouts3365
    @paulvanhouts3365 Місяць тому

    I found that the galvanizing was way too,light, so rust becomes a problem for any exposed frame. They’re easily built, an easy system to follow. Mine was a different brand but very similar.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Yeah, I’ve noticed some surface rust where some bare metal shavings were sitting on the frame. I’ve been wiping it down with WD40 as I see it. Hoping to have things enclosed in the next month or so to stop that.

  • @staceymccloud6
    @staceymccloud6 Місяць тому +4

    Judicious use of clamps and blocks? Who says that??

    • @tfrasca142
      @tfrasca142  Місяць тому +2

      🙋‍♂

    • @staceymccloud6
      @staceymccloud6 Місяць тому

      @tfrasca142 I might use it amongst certain people.

  • @semperparatus3685
    @semperparatus3685 13 днів тому

    "Permitting" is why I live in the country. Once they pay for the building they can tell me how to build it. City, county, state and federal governments have become the #1 barrier to peace and success. If I build it and it falls over I'll build it better next time. If someone is buying my property and don't like the way I built something then they can either not buy or change it when they own it. Now where in those transactions can a bloated nanny gov make things better?

    • @tfrasca142
      @tfrasca142  11 днів тому

      I hear you. If I could be just outside city limits on about 10 acres, I absolutely would.

  • @I_Am_Your_Problem
    @I_Am_Your_Problem Місяць тому

    Thank goodness for the ghay AF music.

  • @whitneypalm2438
    @whitneypalm2438 День тому +1

    People really need to learn the difference between a carport and a shop, the difference in language is significant in it illustrates that people have no idea of the monetary difference between the two

    • @tfrasca142
      @tfrasca142  День тому +1

      Are you saying this is a carport? Where I come from, a carport doesn’t have walls and is mainly used for parking a car under. Shop is short for "workshop", and that's exactly what I'm building here, in every sense of the word.

    • @whitneypalm2438
      @whitneypalm2438 День тому +1

      @tfrasca142 yes this is absolutely a carport just look at the thickness of the tube members not to mention the name of the company you're buying it from. I've been a builder for 40 years, can I get so tired of people complaining about the quality of their "shop", when in reality they have a carport with walls screwed on. Just saying, I want you to be prepared for what you are getting, and what you are not going to get,

    • @whitneypalm2438
      @whitneypalm2438 День тому

      If your structural members are not 11 gauge or less, and your metal sheeting is not 22 gauge or less, you have a carport with metal sheeting screwed on the outside.

    • @whitneypalm2438
      @whitneypalm2438 День тому

      Aura carport with whatever you screw on the outside

    • @tfrasca142
      @tfrasca142  День тому

      @@whitneypalm2438 I just don’t see how the construction of the thing affects what I end up using it for. This will be a shop, not a carport. Maybe it’s thinner gauge tubing than you like, but in no way is a fully enclosed building a “carport”. Would you call a stick built garage a carport? Structurally, this is every bit as stout as a stick build. I’m not saying this is the best way to build a shop, but it’s definitely not a carport.

  • @christophernewman8741
    @christophernewman8741 Місяць тому

    Good video but what awful music.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Cool, thanks. What music should I use in my next video?

  • @xxihasxx
    @xxihasxx 20 днів тому

    whats up with the ridiculous music?

    • @tfrasca142
      @tfrasca142  19 днів тому

      What would you have preferred?

  • @daleolson3506
    @daleolson3506 Місяць тому

    The music junked another video 👎👎👎👎👎💩💩😬

    • @tfrasca142
      @tfrasca142  Місяць тому

      Thanks for taking time out of your day to let me know. I’ll try to do better next time.

    • @FlawedOffroad
      @FlawedOffroad Місяць тому +3

      @@tfrasca142 I dont know why people always have to cry about background music on my videos too. Personally I cant stand the silence of timelapses. That or you get the people that say just "shut up and work" if you try to use a voiceover to fill the silence. I think they dont realize there is no audio on time lapse clips or that the wind wrecks the audio on some normal clips, even with the fancy wind mic. I think it was a great video.

    • @tfrasca142
      @tfrasca142  Місяць тому

      @FlawedOffroad yeah, it’s easy to armchair quarterback this stuff, I guess. Thanks for the kind words!

  • @richardcrouse9074
    @richardcrouse9074 Місяць тому

    I went with a wood post based building.

    • @tfrasca142
      @tfrasca142  Місяць тому

      Yeah, I wanted to do a wood pole barn, but didn't know where to start for the engineering/permitting process. But sometimes I still wish I'd done that.

  • @JA-fn7le
    @JA-fn7le 8 днів тому

    I wouldn't want wood on the outside.

    • @tfrasca142
      @tfrasca142  8 днів тому

      Nice. I do want wood on the outside.

  • @mikegrok
    @mikegrok 6 днів тому

    My surveyor offered the service to come out when we were going to build a metal building. They recommended at least twice. Once after we thought we had the correct placement, and a second time on pour day to make sure that the corners were within 1/4 inch of perfect.
    On one job they said that on the first visit they had seen corners be as much as 32 inches off after formwork was built.

    • @tfrasca142
      @tfrasca142  6 днів тому

      I wish I had double checked the forms before they poured. You'll see in the next video how being about an inch out of square made a ton of extra work for me. 32 inches out is absolutely insane though.