Project Source Window Blinds Install (1" Blinds From Lowe's)
Вставка
- Опубліковано 5 жов 2024
- Here's a quick and simple video showing how to easily install 1" Project Source window blinds from Lowe's.
If you have any questions, just leave them in the comments below and I'll get back to you as soon as I can..
Thanks for watching!
Thank you! Came here because my written instructions were horrible! Your presentation was clear and concise, and without a bunch of unnecessary commentary, music and graphics. Straight to the point, step-by-step instructions, which was exactly what I needed and was looking for. And I appreciate the tip about bracket placement! Saved me some heartache and a bunch of unnecessary holes in the drywall! Thumbs up!
I Agree!
The written instructions are awful
I never thought it was this easy. I hate to read instructions, and you have just avoided that for me. Thank you so much
Hey I'm glad the video helped out!
Wow you made that much easier than the instruction sheet that came with it!
Glad it helped!
Thank you!! We were panicked at the idea of having to pay people to do this, after seeing your video I got 6 blinds hung in a little over an hour.
The instructions that came with these SUCKED! You answered every question I had and we were able to install them and slide them over evenly. Thank you for saving the day!
Sorry for the late reply. I’m glad the video helped out!
Came with no directions/pictures and all the extra pieces made me feel like there was more to it. Thanks so much !!
Thank you Thank you!! I couldn’t understand the instructions so I came here watched your concise video and the blind was up and running within 10 minutes🥰
Thank you for this. Instructions had me all messed up, lol. After watching the video it too 10 minutes to hang! ❤🙏🏽
That's awesome! Glad I could help!
Concise and easy to understand. Very nice 👍🏽
Hey thanks!
I can’t get the blind to snap in the bracket, they keep popping out of bracket! What do I do?
Same problem here.
Same
Same
same problem. Did you figure the problem out? i'm wondering if some of the top of blinds are to thick , or the bracket is not big enough? Could it be a Manufacture defect on some of them.
Thank you for this video! I just bought these from Lowes but they came with no instructions.
Hey your welcome! Glad to have been able to help
Thank you, I couldn’t for the life of me figure out how to use the brackets.
Perfect!! Excellent how-to video, THANK YOU!!
Thanks Friend. My directions said to measure 7 inches from the end which I think would have put me inline for problems, IDK. After watching this video and looking at the top of my blind I think about 3 inches will work better with my 1st and hopefully last attempt. I like your video, quick, spot on and how could you mess it up with Chewy reading your directions to you. Thank-you, I think I was just trying to make this harder than it is....LOL, we'll find out in the morning...
I hope your install went smoothly, sorry for the delayed response!
Great Job...you made this almost effortless for me!
Cant the brackets to click in place. Too stiff for the top. Broke 2 sets of blinds. Run into this?
Can’t get it to snap in
Great vid 👍🏾 Clear and to the point
My blinds do not click in so easily. Also my ceiling is way above the window so my brackets will be installed into the wall above the window. But now I’m confused as to which way to place the bracket on the wall. Ugh. DIY is not my friend.
I am having trouble as well!
Thank you!! So helpful! Now to apply it to installing it myself.....🤞
Awesome! Good luck
Installed thanks to your video!! Thank you so very much!
I’m lost. I can’t lock the brackets into the headrail.
SAME
halp
same problem.
Excellent video!
Hey thanks!
To everyone who is still struggling to snap it in, I just found out why I wasn’t able to. It came with the wrong brackets. The right brackets should flair up wards to be able to hook to then be pushed backwards which makes the bottom part of the bracket snap into the bottom. For some reason the brackets I got were flared down and over it’s self making it impossible to snap on. They were even different than the brackets in the directions. So that may be the issue you are also having. I’m going back to Lowe’s to get an exchange and double checking the brackets before I leave. Hope this helps
I have 10 windows so I bought the cheaper 9.00 Plus ones. I have the exact same problem. I'm Going to check my brackets first by putting them on the top of blind before I even try to install them on the inside of the window. If they Click -Okay-if not then these are defective or made wrong by the manufacturer. Something so easy should not take so much time to install.
Thanks for this straightforward video. The product manual was not explanatory and didn't help at all.👍👍👍
No flat surface over my window frame due to molding. Suggestions?
clear instructions, unpretentious delivery...great video! thanks!
Hey thanks for the comment!
That was helpful!
I just picked up some blinds for a replacement and didn't know how deep to place the brackets.
Thank you for this video!
That’s great, I’m glad it helped!
Thank you! Very helpful
Thx this was very helpful !!!
I’m glad it helped out!
Thank you very much sir it was very helpful
Hey I’m glad it helped!
Wonderful thanks you!
Thank you buddy. Very informative 👏
Thank you so much for the help!!!!
Your welcome!
Yeah guys, I had the same problem trying to snap them in. I basically started at the bottom and held the bottom clip with my finger and then snapped in the top and finally got it.
Thanks brother helps me alot
Your welcome. I’m glad it helped out
Very helpful thank you..
Hey you’re welcome!
I cant figure out how to put the pole on
So helpful thankyou
So helpful
Thanks!!!
I’m trying to fix the lifting mechanics with the blinds but I can’t get it to work, do you mind showing me how yours works
My screws not masonry bits are inoperable against the top part of my window. Any suggestions? I use Dewalt’s 20v impact driver. The screw and the masonry bits get stuck.
Is this drywall your screwing into? I know there is normally metal cornering (not the proper name) placed around widows before they mud and sand the drywall. Maybe your hitting that stuff?
@@WesleyAllenNC is there a to get through?
@@ReynaldoIvanPena without seeing exactly what your looking at, I would say use a regular bit since a masonry bit is technically dull anyway and made specifically for masonry
Studs are being biggest enemy, do you have a second video?
What drill did you use? I need to get one so I can install my blinds
I just have a basic Ryobi One+ Cordless drill. (Any drill will do though)
I just had some Renewal by Andersen till in Widows put in, i did buy this same kind of blind at Lowes for $10, but haven't put them up yet, the trouble i see is, i just have the small wood molding around the widow to attach the bracket, i don't know if that's going to be a problem?
Hmm, it’s really hard for me to say for sure without being able to see what your working with..
@Wesley_Allen_NC yea I just have about an round inch of wood trim to work with along the side of the widow, I do see the bracket has a option of mounting on top, bottom so that may help, thanks. Subscribe to your Channel.
Thanks
Thank you sir
How do you get it sized before purchasing it?
I just measure the overall width and length of the window before purchase. Window sizes vary, but they make blinds for all widths and lengths.
I actually took the blind that I was replacing into lowes and had the guy help me. Well believe it or not the measurements on the box was not the same when me and the Guy in Lowes took it out of the Box and measured it.
THANKS!!!!!!!!!!!!!!!!!!!!!
Im also lost. I have no clue. Help!
Can someone please explain 2:04
tks
Your welcome!
😊
I hate these blinds. Purchased them and cannot for anything get them to click in. I am so angry I want to scream. Nothing is catching and there’s no reason for them to not click in.
Agreed. The Walmart blinds seem easier to snap in. I'm so frustrated. Did you get the blinds installed?
same problem and my husband and I tried everything, I spent hours on 2 windows, and they still will not click in. There has to be a manufacture defect either on the Bracket or the Top thickness?
+
Just setup 4 blinds after watching this video thanks for the tutorial boss 💙🫡
Thank you ❤