They are JUNK. and the shipping to the lower 48 would be $60-$200. The Why: ua-cam.com/users/shortsTJDdzQoeh7I ua-cam.com/video/Z-XcSvVG3WQ/v-deo.html More: ua-cam.com/users/shortsNOXqNcBnu5M ua-cam.com/users/shorts1w9TMiYVmUk ua-cam.com/users/shortsXmjlPaOwlrA ua-cam.com/users/shortscrtdwenwik8 ua-cam.com/users/shortsMcNjXzCwf-o ua-cam.com/users/shortsXmjlPaOwlrA ua-cam.com/users/shorts3dRZPnH_Uhg @@XPFTP
You cab buy a 0-6 set for under $200 with free shipping to most places in the lower 48. If You are going to get into machining long term, you might consider getting higher end mics also, just collecting them one at a time. I love the 193 Mititoyos & the 103s are good too.
For a long time I owned a mix of different model starretts and brown and sharpes. Eventually got annoyed with having so many different models and features I started putting together a set of micrometers that were all the same series and features to please my OCD. I slowly put together a set of starrett 436s. Used those for a few years and worked my way up to where I could finally afford the mics I always wanted, the 226 series starretts. I sold off a polish 0-6” set I had acquired cheap and sold my 436s as I could and started building a set of Starrett 226s. I purchased good, nearly mint ones overtime as they popped up on ebay and eventually ended up putting together two 0-6” sets. Still have one set of 0-3” 436s that were my grandfathers Ill never get rid of. New starret mics do not compare to their older offerings. Mitutoyos are good if I was just starting out today and buying new, thats what I would go with. But I have to admit, Im a starrett nut through and through.
I think if you’re going to buy import metrology tools you’re safe with stateside tool specialists like Shars, who maintain good QC. I’ve purchased a very nice thread micrometer and ID mic from Shars, but otherwise steer clear and stick to established brands. Thanks for the honest review, appreciated!
I like the paint them "Red" situation... hopefully you painted them red before giving them away as gifts [If I had no micrometers , a red one that is still XYZ times more precise than a vernier would be great, even if you did have to ignore the least significant bit/value/number in terms of resolution, it would be an excellent addition to the tool box].
Actually just did a re-check for a short coming out & the 2-3" has an error of .005" out of square, so when measuring round stock because of the taper this will give a random + or - of an additional .0025". The screw threads are only off by a few tenths per 1/4" of travel, in all reality a good vernier caliper is better than these mics. Haven't given them away yet.
@@HOWEES I did think about adding i'm a metric viewer and its hard to visualise the metric equivalent of imperial numbers when listening. At 0.127mm out they would make g-clamps at best. Although saying that, they still may come in handy for making comparative measurements of similar sizes such as interference fits? Really enjoying the video's. Currently watching the one where you are bending back a shaft after a bearing failure.
Now I have to wonder how to re-grind the faces on the cheap??? Definitely check all measurement tools when they come in, I've heard people getting a Mitutoyo, Brown and Sharpe, or Starrett item only to find the random bad item. Check first, trust second.
Vevor is a reseller. Whoever they buy they stuff from is who ever bids the lowest that particular week. They also give away crap to YouToob hobbyists who give good reviews of their junk.
I have Starrett, Brown & Sharpe, Fowlers, and Mitutoyos... For me it's a toss up between my Brown & Sharpes and Mitutoyos... the best bang for MY buck, I'd say we're the fowlers... They were accurate and cheaply priced.
I just bought a chinesium set from amazon along with a set of gage blocks. Well guess what, the micrometers are junk as you said,crooked anvils and inconsistant reading. So i returned the set,waiting the refund. I might be able to get a 0-6 inch set of polish made VIS micrometers,very good condition and complete with case,wrenches and standards and mic read 0,0001. For about $180,should i go for it? Greentings from Canada!
I just did this the other day with my harbor freight micrometers the other day when they were not agreeing with my Starrett calipers. The 0-1 harbor freight micrometer was on between 0~0.375 but sent higher there was error. Checked it with a gauge block too.
For the sake of content, could you attempt to rehabilitate them ? eg taking off some of the landing faces. You might imagine in WW2, or today's russia or africa, someone might find a way to create useful tools from this starting point.
We will have a short out soon about a mapping of the errors of the first 3 mics of one of the sets, as I was curious about what the correct answer to your question should be, and the answer is no. even the thread travel is off by as much as .ooo4 over 1/4" travel, and not in a constant change, just random error. If some value were to be had from the parts, I think the carbide faces might be usable for something.
I’ve heard it said that China has two sets of factories. One for the Asian market and one for the North American. I know that you don’t get to assign intent where none exist but this kind of evidence has been going on for decades. Like you can’t tell me the machinist and engineers who work for Honda or make 54 g/m @5000 psi hydraulic pumps for Kawasaki are using Vevor mics.. lol
Oh shit, I ordered some cheap Chinese micrometers a few days ago and thought, how bad can they really be? Too bad this didn't come out last week. But my plan was also to check them with gauge blocks.
Just added a short on the checking in detail: ua-cam.com/users/shortsTJDdzQoeh7I
ill send you 25 bucks for them. not a spaceship builder and just starting out .
They are JUNK. and the shipping to the lower 48 would be $60-$200.
The Why:
ua-cam.com/users/shortsTJDdzQoeh7I
ua-cam.com/video/Z-XcSvVG3WQ/v-deo.html
More:
ua-cam.com/users/shortsNOXqNcBnu5M
ua-cam.com/users/shorts1w9TMiYVmUk
ua-cam.com/users/shortsXmjlPaOwlrA
ua-cam.com/users/shortscrtdwenwik8
ua-cam.com/users/shortsMcNjXzCwf-o
ua-cam.com/users/shortsXmjlPaOwlrA
ua-cam.com/users/shorts3dRZPnH_Uhg
@@XPFTP
You cab buy a 0-6 set for under $200 with free shipping to most places in the lower 48. If You are going to get into machining long term, you might consider getting higher end mics also, just collecting them one at a time. I love the 193 Mititoyos & the 103s are good too.
For a long time I owned a mix of different model starretts and brown and sharpes. Eventually got annoyed with having so many different models and features I started putting together a set of micrometers that were all the same series and features to please my OCD. I slowly put together a set of starrett 436s.
Used those for a few years and worked my way up to where I could finally afford the mics I always wanted, the 226 series starretts. I sold off a polish 0-6” set I had acquired cheap and sold my 436s as I could and started building a set of Starrett 226s. I purchased good, nearly mint ones overtime as they popped up on ebay and eventually ended up putting together two 0-6” sets. Still have one set of 0-3” 436s that were my grandfathers Ill never get rid of.
New starret mics do not compare to their older offerings. Mitutoyos are good if I was just starting out today and buying new, thats what I would go with. But I have to admit, Im a starrett nut through and through.
Mitotuyo is always quality.
You Hava an idea how valuable this review is? Thank you, man, for your work
He would definitely be a great teacher he seems to be very patient. One love
I think if you’re going to buy import metrology tools you’re safe with stateside tool specialists like Shars, who maintain good QC. I’ve purchased a very nice thread micrometer and ID mic from Shars, but otherwise steer clear and stick to established brands. Thanks for the honest review, appreciated!
You deserve more likes on this subject. The cheaper ones are silly and lop sided IF we pay attention.
Thank you for the honest review. Saved me a bunch of time hunting for decent mics.
Mitatuyo are my go to as well. All though I have been using some Chinese mics from HFS lately that are very VERY similar
Thanks for the honest review
You can use them as c clamps also.
I like the paint them "Red" situation... hopefully you painted them red before giving them away as gifts [If I had no micrometers , a red one that is still XYZ times more precise than a vernier would be great, even if you did have to ignore the least significant bit/value/number in terms of resolution, it would be an excellent addition to the tool box].
Actually just did a re-check for a short coming out & the 2-3" has an error of .005" out of square, so when measuring round stock because of the taper this will give a random + or - of an additional .0025". The screw threads are only off by a few tenths per 1/4" of travel, in all reality a good vernier caliper is better than these mics. Haven't given them away yet.
@@HOWEES I did think about adding i'm a metric viewer and its hard to visualise the metric equivalent of imperial numbers when listening. At 0.127mm out they would make g-clamps at best. Although saying that, they still may come in handy for making comparative measurements of similar sizes such as interference fits?
Really enjoying the video's. Currently watching the one where you are bending back a shaft after a bearing failure.
Polish Micrometers mentioned
Now I have to wonder how to re-grind the faces on the cheap???
Definitely check all measurement tools when they come in, I've heard people getting a Mitutoyo, Brown and Sharpe, or Starrett item only to find the random bad item. Check first, trust second.
They get lapped. Not a real hard process but it is extremely finicky. As long as barrels are actually square.
Vevor is a reseller. Whoever they buy they stuff from is who ever bids the lowest that particular week.
They also give away crap to YouToob hobbyists who give good reviews of their junk.
Man, those mitotoyo clamps look nice!
He sounded like Red Skelton doing a Gertrude and Heathcliff skit.
Are you going to make a whole video on the torture to them
More:
ua-cam.com/users/shortsNOXqNcBnu5M
ua-cam.com/users/shorts1w9TMiYVmUk
ua-cam.com/users/shortsXmjlPaOwlrA
ua-cam.com/users/shortscrtdwenwik8
ua-cam.com/users/shortsMcNjXzCwf-o
ua-cam.com/users/shortsXmjlPaOwlrA
ua-cam.com/users/shorts3dRZPnH_Uhg
Good morning everyone hope everyone is having a blessed day thanks for the video
I have Starrett, Brown & Sharpe, Fowlers, and Mitutoyos...
For me it's a toss up between my Brown & Sharpes and Mitutoyos... the best bang for MY buck, I'd say we're the fowlers... They were accurate and cheaply priced.
currently, Fowler is what I am looking @
did you also went w/ Fowler for their dial bore gauge?
Are the gauge blocks made in China also
I just bought a chinesium set from amazon along with a set of gage blocks. Well guess what, the micrometers are junk as you said,crooked anvils and inconsistant reading. So i returned the set,waiting the refund. I might be able to get a 0-6 inch set of polish made VIS micrometers,very good condition and complete with case,wrenches and standards and mic read 0,0001. For about $180,should i go for it? Greentings from Canada!
I just did this the other day with my harbor freight micrometers the other day when they were not agreeing with my Starrett calipers. The 0-1 harbor freight micrometer was on between 0~0.375 but sent higher there was error. Checked it with a gauge block too.
They would be good for home 3d printing.
For the sake of content, could you attempt to rehabilitate them ? eg taking off some of the landing faces.
You might imagine in WW2, or today's russia or africa, someone might find a way to create useful tools from this starting point.
I now it wouldn’t pay, but could they be fixed? Just curious
We will have a short out soon about a mapping of the errors of the first 3 mics of one of the sets, as I was curious about what the correct answer to your question should be, and the answer is no. even the thread travel is off by as much as .ooo4 over 1/4" travel, and not in a constant change, just random error. If some value were to be had from the parts, I think the carbide faces might be usable for something.
When you said there bad, there bad, Thank you for the reply and the videos, very good
@HOWEES I would suspect the surface finish on the screw threads is sub par and could be a source of error or dirt from careless assembly.
Thanks for the warning. Innacurate micrometers don't really fit the bill.
Anyone that buys an entire set of Mics for $73 deserves what they get.
OH yes, but the same mics can also be purchased with other stickers & a $400 price.
They would be good for a wood turner lol
I’ve heard it said that China has two sets of factories. One for the Asian market and one for the North American.
I know that you don’t get to assign intent where none exist but this kind of evidence has been going on for decades.
Like you can’t tell me the machinist and engineers who work for Honda or make 54 g/m @5000 psi hydraulic pumps for Kawasaki are using Vevor mics.. lol
Chi-no-no pour moi .
Ive got some and there smooth and seem ok. For my first set, ill probably drop or damage them learning. $70 is acceptable 👍👌🇦🇺
Send them to me. So I know good mics vs bad mics.
Yo
You get what you pay for.
Oh shit, I ordered some cheap Chinese micrometers a few days ago and thought, how bad can they really be? Too bad this didn't come out last week.
But my plan was also to check them with gauge blocks.
You might get lucky. Check them and maybe let us know?
Had to laugh.. I waited..
I’m just starting to tool up.
..😂..
some how Howees got ya covered.
Well, I guess if you buy cheap you buy twice...
@@StuartsShed I'll report back. Maybe I can somehow grind the tips flat and square if they are crooked?
@@AlJay0032 Buy nice or buy twice!