YOUR AWESOME BROTHER...MY VSA / TRIANGLE TRIPPED UP WHEN MY VVT OIL PRESSURE SENSOR FAILED...AND I COULDNT ERASE THAT DARN TRIANGLE / VSA....I EVEN HAD MY MAXICOM AUTEL 808 SCANNER...I DONT EVEN KNOW HOW TO USE IT PROFESSIONALLY...BUT THANKS TO YOU....NOW IM LOVING THIS SCANNER ALSO...NOW MY DASH IS CLEAR OF ANY WARNING LIGHTS...GOD BLESS YOU PEOPLE SAVING US MONEY ON DEALERSHIPS AND CROOKED MECHANICS...
you are a life savor I was wondering why my autel could not clear it for my customer, I will try this in 2 hours. liked and subscribed, pump more videos of what this scanner can do. how did you figure it out? so bad ass man. I would think you went thought with each hot functions menu to figure it out, you cant find this info even with autel. thanks again for saving the day. looking forward to what more this scanner can do. im sure it can program keys and do a bunch of things im un aware of lol
I mean for a standard VSA sensor neutralization relearn with Honda’s HDS scan tool our dealer would just charge the standard $89 diag fee typically, $250 is a bit rich.
I have a 2007 Pilot, 4WD. My triangle light came on when the front left speed sensor went out. I have since changed the sensor and confirmed function through my X Tool D7, all four wheels are showing the same speed in live data when I drive straight. I found the VSA sensor neutral reset function, but I still can't get the triangle light to go off. The only code I am getting is 84-1. A friend tried to reset with his Autel, still no luck.
Do you know why when I turn on my 2003 pilot it is fine but after a few seconds or start rolling back the VSA kicks on and limits my rev speed, I have to pull over and restart the car and drive fast real quick
What initially made that light cut on? Mine is on (VSA and triangle light); came on while driving. I saw a video saying that low oil or expired oil may cause it. What typically causes this light to illuminate?
my vs and abs and vtm-4 came on and the warning trainangle just had my axel fixed battery died so i jump it so you think if i change the battery it will fix the problem
I had this VSA & the triangle light went On yesterday on my Honda Pilot 2006 2WD. I kept driving at steady speed till I got home then switch off the engine & re-stated & the VSA & the triangle alarm did not re-appear. What could be the reason for this.
I have both VSA light and Triangle but when I connected my autel and tried to access the steering it said “This function is not supported on this vehicle” I have a 2007 Honda Pilot any thoughts on this
Hey had this same issue, figured it out. 2007 is different where you have to connect to it then go to Diagnosis -> Control unit -> ABS/VSA -> Adjustment -> All sensors.then you do the reset
If it comes back on most likely a wheel speed sensor issue, either wiring to the sensor or sensor itself. I think this car may be one that has magnets in the wheel bearings. If a bearing is put in backwards it will not read on the speed sensor
I got it from a Cornwell tool truck. It is from autel. It is the 906ts I believe. I specifically got it because it will relearn tire pressure monitoring system hence the orange square in the upper right corner
So it's just a computer program? Not a actual part ? Because I have the vsa light on and the triangle with the exclamation mark and when I go over 3500 rpm it jerks??
Normally with no problem yes but this vehicles battery had been dead for a long time and the control module had lost calibration and the light comes on automatic at start up
@@SCOPELITUS Thanks. The ASV and ! in the triangle was annoying plus I'll be selling it next year, so I went back to the mechanic and told him to reset it, which he did at no charge.
YOUR AWESOME BROTHER...MY VSA / TRIANGLE TRIPPED UP WHEN MY VVT OIL PRESSURE SENSOR FAILED...AND I COULDNT ERASE THAT DARN TRIANGLE / VSA....I EVEN HAD MY MAXICOM AUTEL 808 SCANNER...I DONT EVEN KNOW HOW TO USE IT PROFESSIONALLY...BUT THANKS TO YOU....NOW IM LOVING THIS SCANNER ALSO...NOW MY DASH IS CLEAR OF ANY WARNING LIGHTS...GOD BLESS YOU PEOPLE SAVING US MONEY ON DEALERSHIPS AND CROOKED MECHANICS...
Thank you worked on my Autel mx808, no more triangle!
Thanks brother! I was cracking my head trying to find wth was going on because couldn't find a cause. 🙏
Thanks for the vid! I have an Xtool D8 and was able to find exactly what you described and reset VSA on my ‘06 Pilot
Hi, How did you find this feature in the D8? I have the same light turned on and can't seem to figure out how to reset with my D8. thanks,!
you are a life savor I was wondering why my autel could not clear it for my customer, I will try this in 2 hours. liked and subscribed, pump more videos of what this scanner can do. how did you figure it out? so bad ass man. I would think you went thought with each hot functions menu to figure it out, you cant find this info even with autel. thanks again for saving the day. looking forward to what more this scanner can do. im sure it can program keys and do a bunch of things im un aware of lol
You saved my day. Thanks for the video man
Nice, I have this exactly problem right now.
Gonna try tomorrow with my think diag.. thanks brother.. 🤞
Super, gracias por compartir tu conocimiento 👍
Thanks work with my xtool ez400.
Thank you so much is fixed my problem
Thanks a lot, I have same maxisys, thanks
Bahahahahaaaa! Worked like a charm! Thank you so much!
Thank you l got the same problem on my wife Honda pilot and about to get to it thank you l never would find it if I didn't see video
I mean for a standard VSA sensor neutralization relearn with Honda’s HDS scan tool our dealer would just charge the standard $89 diag fee typically, $250 is a bit rich.
I have a 2007 Pilot, 4WD. My triangle light came on when the front left speed sensor went out. I have since changed the sensor and confirmed function through my X Tool D7, all four wheels are showing the same speed in live data when I drive straight. I found the VSA sensor neutral reset function, but I still can't get the triangle light to go off. The only code I am getting is 84-1. A friend tried to reset with his Autel, still no luck.
Nice worked
Thanku I did that...
Do you think it will work for a foxwell nt624 scanner?
Do you know why when I turn on my 2003 pilot it is fine but after a few seconds or start rolling back the VSA kicks on and limits my rev speed, I have to pull over and restart the car and drive fast real quick
What initially made that light cut on? Mine is on (VSA and triangle light); came on while driving. I saw a video saying that low oil or expired oil may cause it. What typically causes this light to illuminate?
Normally something to do with speed sensors or steering angle sensor. Traction control components. This one was a dead battery for extended time.
Will it work for a 2004 acura tl?
Thanks. Nice job.
Thanks for info. I see you have an Autel MS906. Any chance you know if the previous MaxiCom Autels work?
This scanner is the more expensive autel 906 I believe but they do make a cheaper one that does everything this one does but not wireless
Thanks for the reply. One other question. Did your VSA light come on next to the triangle after driving about 50 ft?
Yes it was also coming on after a short drive. If this doesn't fix your vsa light you could need a wheel sensor
my vs and abs and vtm-4 came on and the warning trainangle just had my axel fixed battery died so i jump it so you think if i change the battery it will fix the problem
Most likely needs relearn from the battery going dead
My turns on after starting to drive the car!
That scanner is over a grand.
So if you ignore it then it's still good then?
Yeah this video is mostly for people to show their mechanic if he can't find out how himself
I had this VSA & the triangle light went On yesterday on my Honda Pilot 2006 2WD. I kept driving at steady speed till I got home then switch off the engine & re-stated & the VSA & the triangle alarm did not re-appear. What could be the reason for this.
Could be intermittent wheel speed sensor problem. Hard to say if you don't have any codes in memory
I have both VSA light and Triangle but when I connected my autel and tried to access the steering it said “This function is not supported on this vehicle” I have a 2007 Honda Pilot any thoughts on this
I don't sorry. Maybe manually.put in a different year and try again
Hey had this same issue, figured it out. 2007 is different where you have to connect to it then go to Diagnosis -> Control unit -> ABS/VSA -> Adjustment -> All sensors.then you do the reset
Which autel did you use?
What if after you reset it and it come back again. What could it be?
If it comes back on most likely a wheel speed sensor issue, either wiring to the sensor or sensor itself. I think this car may be one that has magnets in the wheel bearings. If a bearing is put in backwards it will not read on the speed sensor
i need that one same my honda pilot 2005 after rebuild transmission How much like that
The cat was approx 450
What is the details of the scanner you are using & where can I buy it?
I got it from a Cornwell tool truck. It is from autel. It is the 906ts I believe. I specifically got it because it will relearn tire pressure monitoring system hence the orange square in the upper right corner
Will model mx808 work to do this?
Not sure. If it has these menus it should
Yes it will work. I just did it with my MaxiCheck MX808. Took a while because I just got the MX808. I am still trying to figure out all the functions.
So it's just a computer program? Not a actual part ? Because I have the vsa light on and the triangle with the exclamation mark and when I go over 3500 rpm it jerks??
It can be a part has gone bad. You have to read the codes stored. This car only had codes for steering angle sensor not initialized
@@SCOPELITUS ok thanks for the help what codes am I looking for?
I’m having the same exact problem. How did you fix?
Snap On scanner did not, autel maxisys ultra did.
Wouldnt it just turn off by hitting the vsa off button?
Normally with no problem yes but this vehicles battery had been dead for a long time and the control module had lost calibration and the light comes on automatic at start up
My vsa button is useless push it lghts still on (vsa and triangle
Mine has both VSA and the triangle. I’m expecting a damn fortune price.
I have a Ms 906ts but it says this function is not supported on this vehicle..my honda pilot is 05
same
Didn't with my autel for my 2004 acura tl. Told me its not supported.
What model Autel is this?
MS906TS
Mine is saying the operation is failing when trying to reset it
Same
wala
Mine came on after I just picked it up from having new pads and rotors installed! Money grab?
If they disconnected your battery it is possible
@@SCOPELITUS Thanks. The ASV and ! in the triangle was annoying plus I'll be selling it next year, so I went back to the mechanic and told him to reset it, which he did at no charge.
That's not a very generic scanner
O
only autel would work
I am sure others would work but I was just saying how to do it with the autel
Autel MS906TS Diagnostic System
CDN$2,345.31
affordable :|
I got mine used for 500