Sequoia offroad Prairie City
Вставка
- Опубліковано 30 вер 2024
- testing the capabilities of 1st gen sequoia
with 2" lift and 33s. no lockers yet.
location is Prairie City. feel free to follow my builds @bboyjohn04
mods
front:
Total Chaos UCA
OME springs 2885
Bilstein 5100 shocks
forged joints adjustable sway bar endlinks
rear:
OME 60020 shocks
OME springs 2862
forged joints adjustable endlinks
So this looks like just 4x4. Not locked dif. Right?
Yes, This was in 4hi majority of the obstacles. No center diff lock engaged and still open diff on the front and rear.
Lower the tire pressure
Next time
Were you not aired down ??
Nope, rookie move big time. Got round 2 Prairie City on new wheels and 37s coming up soon
Dude can’t drive.
@@4800BMO first time wheeling here, hopefully I got better this time around. Thanks for viewing
@@saeturn29 💯 I’ll keep checking on you.
Nice, you have to stay on the gas a little bit longer and it usually catches a ATRAC will kick in. Be careful though people break Sequoia's when they give it too much gas. And then it crabs and snaps everything. So light throttle
I don't even know if my atrac is working correctly or not. My yaw rate sensor went bad so I just disconnected the traction controls and left it like that. It's still fun regardless
You should do a build list video on the Sc
After the manual swap
@@saeturn29 Okay thats fair, manual swap is pretty significant
seems like he hasnt learn that atrac is disabled everytime he hits the brakes and to use it is a constant throttle w o touching the brakes.
Yaw rate sensor is bad so atrac is a no go since I unplugged the traction controls. 😅
Do the gx460 brake upgrade if you haven’t already.
That's on my list
Just run a vented rotor with the stock calipers, it prevents the brakes from overheating and warping and you can still run a 16 inch rim.