🥇Kawasaki KX 85 Dirtbike - Carburetor Rebuild / Carb Clean - WOW 🤩

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Complete Carburetor Rebuild / Clean on a Kawasaki KX 85 Dirtbike
    Link to rebuild kit: amzn.to/2ZELq5J
    Also more common issues with the Kawasaki KX Dirtbike watch:
    • Kawasaki KX80 Kx Dirt ...
    • Kawasaki KX80 Kx Dirt ...
    Patreon / midnebraskamotorsports
    Instagram / midnebraskamotorsports
    Check out our eBay store at stores.ebay.com/midnebraskamotorsports
    Shop for parts at: midnebraskamotorsports.com
    We Disassemble: Clutch Head Cover Cylinder Piston Stator Points Rotor Magneto Generator Alternator Coil Camshaft Cam Chain Tensioner Rocker Electrical Cases Bottom End Case Set Transmission Shift Drum Fork Gear Shaft Flywheel Starter Idler Clutches Bearings U Joint Yoke Driveshaft Shaft Float Main Jet Bowl Slide Needle Seat Intake Assembly

КОМЕНТАРІ • 23

  • @SHAKENBAKEDRIFT
    @SHAKENBAKEDRIFT 2 місяці тому +1

    Thanks for the refresher it's been15 years since I've done one. Just got the daughter a 2003 kx85 throttle sticking. The needle was bent so I tapped it straight see if she fires up

  • @nuts4helis
    @nuts4helis 28 днів тому +1

    Well done! Perfect video!

    • @MidNebraskaMotorsports
      @MidNebraskaMotorsports  21 день тому

      Comments like this keep me going!! Thanks for watching and the comment. Let us know if you need anything. www.ebay.com/str/midnebraskamotorsports

  • @lurhq343
    @lurhq343 3 роки тому +1

    Best video for this build!!

  • @KyleMaylor
    @KyleMaylor Рік тому +1

    Great Video, Thanks!

    • @MidNebraskaMotorsports
      @MidNebraskaMotorsports  Рік тому

      Thanks for the comment Kyle. Plenty more videos coming on the KX. Make sure you hit the subscribe button! Check us out for parts! www.ebay.com/str/midnebraskamotorsports

  • @Dobemandan
    @Dobemandan Рік тому +1

    What pilot you using??

  • @albertoanaya1669
    @albertoanaya1669 7 місяців тому +1

    The air fuel mixture screw how many turns out usually? My son got ahold of it and moved it and now i don't know how many turns? Just a basic rule of thumb?

    • @jaydenfox5755
      @jaydenfox5755 5 місяців тому +1

      Hello, did you ever end up figuring out how many turns it was? I have the same issue and I can't get it to run right.

    • @jaydenfox5755
      @jaydenfox5755 5 місяців тому +1

      I turned it out 2 turns out from all the way in, 1 and 3/8s, 1 and 1/2 and it still bogs down

    • @MidNebraskaMotorsports
      @MidNebraskaMotorsports  4 місяці тому

      It should be about 2 turns out depending on riding condition. If the bike is still bogging then you have other issues. Maybe a plugged main or a poorly adjusted needle. Let me know what you find. If you need more helpful tips, check out: ua-cam.com/video/X0AdFxkJiOg/v-deo.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. Thanks for watching and the comment.

    • @albertoanaya1669
      @albertoanaya1669 4 місяці тому

      @jaydenfox5755 start at two turns and monitor your spark plug.

  • @Tizzypj
    @Tizzypj 4 роки тому +2

    I have a 2003 kx85 mate and it fires and runs but mainly on a bump start bro but then bogs and dies any ideas

    • @Tizzypj
      @Tizzypj 4 роки тому

      Mid Nebraska Motorsports sorry this was when i got it I’ve recently put new top end clean carb better fuel new plug new gear oil and it’s a lot better but not perfect last time out blow head gasket and radiator as it’s running very hot it touches band now but only for short bursts then dies off again but contines to run I did recently notice the engine cases were leaking and the bolts were loose to my standards and I have pinched them up and I’m sure has solved the oil leak but still haven’t run the bike and actually tried after new head gasket now put on but rad is still leaking

    • @one6media
      @one6media 3 роки тому +1

      Spark plug I would try as well

    • @Tizzypj
      @Tizzypj 3 роки тому

      @@one6media sweet for the reply it was p/v top end and a very thorough carb clean mate ended up killing it in some water I went through sold it and have a ktm85 2004 with Judd racing 150 mate

    • @Tizzypj
      @Tizzypj 3 роки тому

      @@one6media 105***^^^

    • @tokyo7842
      @tokyo7842 Рік тому +1

      @Trizzy P Hmp-y hey bud I have a 04 85kx with the 105cc jug. I had messed with the carb last winter an messed both idle an air screws all up I turned them both to about 1.5 turns out an have been messing with it around them settings but can't get it started to save my life. It keeps flooding an my plug keeps getting soaked in fuel. I never actually took apart the carb an cleaned it cause i figured it ran perfectly before I messed with it that's probably not the issue. Should I break it down an clean it? What where the specs you had your air to fuel ratio like the number of turns for both? If you reply I'd greatly appreciate it.

  • @ryanverde1015
    @ryanverde1015 Рік тому

    I just bought a new carb oe for my 07kx85 and I can’t get it to stay running found the main jet was a 120 so I put the 135 main in it and still having issues any help

    • @bananaman5886
      @bananaman5886 11 місяців тому +1

      I got a 45 pilot and 142 main air screw 2 turns out in my bike kx85 16 runs good idles good

  • @cannonroberts5129
    @cannonroberts5129 4 роки тому

    I just subscribed, why is there no bell to get notifications?