Building My Wife’s 1000HP Duramax Show Truck In The Garage! BIG UPDATE
Вставка
- Опубліковано 5 вер 2024
- Enter for Tie-Rod Giveaway here: Merch 🚨CTS Mounts, T-Shirts, Hats, Keytags, Diesel Parts and more! 👉 truckmasterdie...
Subscribe to my new UA-cam channel: / @truckmastergarage9944
If you guys want to buy wheels and tires click here
team.customwheeloffset.com/Truck Master
Ryan’s Diesel Service ryansdieselser... 5%off turbo’s coupon code👉 truckmaster
Kodiak Truck North Prairie, WI 👉 kodiaktruck.com transmission, tcase and rearend coupon code truckmaster save 5%
Instagram: @truck_master07
My Instagram @truck_master07
www.instagram....
hspdiesel.com
Coupon code: “truckmaster”
Anthem Wheels! www.anthemwhee...
Instagram @truck_master07
#duramax #powerstroke #cumminsnation
Engine bay area black, underneath white to match the body
All Black
Black for sure.
Getting out of the Army soon due to a bad injury. This gives me hope on what I can do in the future. Love this channel and I have been learning so much. This channel has been making a difference for me
Goalz!
I think kall white would look the best
Black under cab it's looking good 👍👍👍👍👌
Black. Josh I miss the old endings can you please do a throw back for me? I miss the trucks and the music. Love you both!
Yes definitely I will do it in the next one but unfortunately UA-cam keeps flagging my videos with music in them now
Black paint on the cab for sure
White bed liner also bed liner up the back of the cab to the window.
Black, in my opinion, Looking Great Truck Master! Awesome Brother 🏁 ☠️ 🛠💨
She's coming along nicely. Black or dark Charcoal on the bottom. Go truck master!
All black
Consider Dove Grey bedliner underneath. It will hide dust and dirt better than white or black.
Black
While you have them off, take the time to disassemble your alternator and new AC compressor and have them powdercoated, they really arent that hard to disassemble/reassemble and it make a world of difference in the engine bay when you lift hood. Just my 2 cents but its looking great!
Nice build with a lot of potential, but maybe fix the Hydraulic Fluid leak on your lift, "for safety"...
All black is will make everything on the engine pop in color wise
Great point
I agree all black !
My third hand is bungee cords, tie down straps, magnets and of course, duct tape.
Duct tape for sure
Idk what undercoating you're using but I would go with a lighter purple raptor liner. It will off set the deep purple driveshaft and accessories and at the same time offset the black frame. Ending up with not to much black and not too much deep purple while still matching and looking good.
Wow
Love that Wife Max build. Keep it up.
Sweet…
White for sure. The cab looks clean all one color. Same tone of white tho.
Awesome... Looking good 👍👍👍👍
Definitely all black liner underneath the cab and in the engine bay
Definitely Black undercoat
Save yourself a headache and replace those two heater hose fittings on your heater core before you put the cab back on. Way easier to do now rather then later.
Do the underbody purple
Looks great josh keep up the progress I'd go all black underneath.
I bet white on the bottom would look great it took years to get that dirty an if it’s a show truck it should be keep clean anyways. I remember seeing it in person at the cole motors meet a couple years ago an thought the fire wall definitely need to be painted an fender liners lol can’t wait for the finish product looks great so fair was a little hard to watch the chain rub on the powder coated frame an the breaker bar 😅
Thanks John luckily the powder is still in good shape 👍
go all black
Nice looking truck build
I would go all black
Most definitely all black bed liner
Great progress 🎉
All Black!!
I’d just go all black too under there the road grime and stuff won’t drive you crazy later on
white engine bay, black underneith
Thanks
All black 👍🏻
Black it's looking good
Lookin good bro! And black all the way
It's actually pretty important that you only apply force on the hand grip area of a torque wrench.
Also believe it or not you'd have been better off to be pulling up on it.
Dude, when that torque wrench beeps stop pushing!!!!! That 250 ft lbs is probably 300+ now!! Good way to snap bolts!
Listen to the wife Josh, black on the bottom. Any worries about HSP using 1018 carbon steel for exhaust manifolds
I’m not to sure what material it is but I’m not worried at all
Looks awesome great job 👏
Thanks 🙏
One thing you should consider if you haven't is a guillotine for the Turbo I understand it's a brand new engine but still you don't want a 1000 horsepower to runaway unchecked
White
Dude... I was holding my breath when you were doing those 250lbs...
Me to 😂
Yea I was waiting for him to snap some bolts!! The whole point of a torque wrench is to STOP when it tells you to stop!!
wow send it lot of guys love to be doing what your doing
all black
I'm with Wifey All Black.
What a beautiful rig
Great job brother that it’s so awesome proud of you brother
Maybe in the future u can help me rebuild my DMax
Not digging the PPE dif cover over Banks. Not for looks but for utility.
This video was about 30 minutes to short! Thanks Josh and Melanie!
bungy chord would hold that engine straight while you drop it into place.
Truck is looking great,.. but why are you not color matching the trans with the drive train
I agree but then again once the cab is on you will never see it. Great point though I should have painted it
All black bottom with white firewall.
White under the cab
Thanks
Get a Banks rear diff cover. Designed better than the flat back one you have now.
All black for the underneath
Just black great work keep it up
Definitely go white. This way when you pop the hood everything is the same color in the engine bay and going down the under side of the cab. If this is gonna be a show truck, it’s all about the details.
Replace the rear diff cover with the banks one because he has a really comprehensive video explaining why flat diff covers are bad for the diffs
Josh are you going to sell that old fluid damper, will it fit a lbz? I’d be interested in it if your going to get rid of it. I’ve been following the channel since the beginning, I enjoy the content you bring!
Thanks! I think that’s specifically for a lb7 unfortunately
ALL BLACK
Black!
Looking great 👍🏻
Been watching since the early days when the LBZ was black still, so I don’t mean to sound like a broken record here Josh but what would be really nice is if you took the now old frame and did an SAS to it and put another truck on top
White firewall. Black under carried
👍
Josh, honestly…I would avoid using bedliner on it. My understanding is that it will hold moisture in, which can result in rust down the road. If it were me, I would prep, prime, paint and undercoat it with a quality under coating that has proven results. With all the time, effort and expense you guys have in the truck, I would do everything possible to preserve it. My two cents…anyways, the truck is coming along nicely, it will be a force to recon with, something you both will be proud of for years to come, take care and God bless…David.
Beautiful truck wished I would’ve lost mine in a garage fire
Oh no sorry to hear
Gonna look sick bro!!👍🏼…Aloha🤙🏽
I Appreciate it man
You have a video on how to remove crossmember?
All white
Good stuff as always 👍
Hey on the L5Ps can you test what exhaust tips are best bang for the buck for emissions compliment?
Go white look sick
I hated torqueing my flywheel bolts 😂
I’m jelly, mine needs rebuilt
Good video. And looking good. I hate see you torque 500 ft lbs like I have to do a lot. I say all black also.
500? Wow
@@TruckMaster yes semi truck tires torque to 500 ft lbs. We have 3/4 inch torque wrench that how we do it
White .. u can see any issues . Great for lights too . Hahah
Great point
Go all black
All black on the bottom
I really appreciate all the detailed work you put into everything!
No problem I’m glad to get the info out 👍
Seeing as you're looking into doing things right and getting the best performance, have you looked at the Banks diff covers and why they are better than the flat style ones?
I’m glad I have that flywheel tool. Big cringe watching all that load l travel through that crank shaft. Also, I would do white liner under the cab. Black wouldn’t reflect the nice powder coat done to the frame
I saw the schaffers atf, you using schaeffers engine oil as well?
No I’m using the Amsoil
Cover your engine up you spend a lot of money you wouldn't want the dirt going in there when you're using your leaf blower on the floor.
You are absolutely right
Factory valve bridges risking it for a biscuit
Would you recommend using that brand torque wrench on head studs?
Have you seen the s&b 62 gallon fuel tank for the lb7?!? Also I’d like to see what you think of the driven diesel power steering line upgrades!
I think you may have a bot/scam here.
You are making good progress - that lift certainly helps. I agree with Melanie - black on the bottom of the cab - otherwise you will want to frequently power wash the bottom of your cab :) I think a white firewall would look good with a white engine bay. However, it is a decision you and Melanie need to make - good luck.
Thanks Roy
black
All black under the cab
All Black no Question
Black.
ME: we are going to watch Truck Master.
Truck Master: Video stars with him moving the wifemax frame with a tractor.
My 3-year-old son: Hes the Tractor Master.
So far I love what you are doing with Wifemax. I think the bottom of the bed, cab, and engine compartment should be black.
From my personal experience I highly suggest using something like POR-15 rather than bed liner for the cab, just as strong, doesn’t hold moisture and dirt the same way (which being in the Midwest, you understand) and gives a nice gloss finish if that’s what you like. Either way it’ll turn out great and black has my vote. Even for the firewall it’ll make the powder coat pop more and leave the bay seeming endless.
Great video as usual. After crunching numbers & talking to clients all day I love to sit back & watch you work your magic. You are talented! Oh listen to your wife; go with the black!