Excellent ! Thanks so much. I'm restoring a Cannondale mountain bike with Dart 2 turnkey forks. I couldn't have serviced the forks without your help. All went smoothly. Found that the damper wouldn't take the full 20ml of 15wt oil but the forks are now as good as new.
The only thing I miss was I don't have some tools like what you've got. But anyways thanks for the nice and smooth tutorial I think I can manage. Cheers.
I see that this was a year ago. I have a 06 Cannondale Rush and it has a Rock Shock Recon on it from the same year. I like the bike and the shocks. I want to service my shocks and rebuild the shock. “Friends “ tell me I’m wasting my time. Do you think I’m wasting my time with it? I’m in touch with SRAM and they’re getting me a rebuild kit for it so I’ve already crossed that bridge
@@schmarrenheimer80 so I got in touch with SRAM and they got back to me eventually and they had to try to find the rebuild kit. Anything that was found was old stock which was not of original quality therefore not only was it not worth it but it wasn’t even feasible. I dont know if there are any aftermarket companies that might make a build kit but I seriously doubt their are. So it turned out to be such a hassle that it just wasn’t worth it.
@@PatrickKend thank you! I can't seem to find valid parts numbers that are in stock here in Germany either. I'll see if I can do some limited service then, and eventually will replace the whole fork.
Thank you so much. By the power of the algorithm I found your video, and the Dart looks suspiciously similar to the ~2006 Rockshox J3, for which I cannot find any meaningful instructions.
Hello and thank you for this very professional video. Does the spring side really takes oil from the bottom after reassembly? I could not find this instruction within the service manual and the volume/oil weight table is - - - dashed for the coil side. Isn't the grease soluble by the oil anyway and would end up diluted at the bottom? I'll follow all other parts and hold back on the oil injection in the coil side.
this was a bunch of help to see how it comes apart etc. i had been using mine locked out all the time and i hit a dip and heard like a snap and the lock out stopped holding at all. i took it apart on the oil side and found a little steel like nipple threaded on one end and put it back into the top lockout section on its bottom was threaded for the nipple so i screwed it back where it came out of and put fresh oil. after all that it didn't work, the lockout doesn't work at all, i wonder if something else broke, Does anyone know what this is?
My compression damper's (at 11:23) lockout function was not working, so I realized that it can be further disassembled. The top end of the grey tube has 2 slots for a 20mm wrench but be very careful because its reverse threaded!
Very sad this doesn't fix all the creaking steer tubes that RockShox released. Scram also leaves all the riders hung out to dry who have this issue. This completely explains why the trash can is labeled Scram warranty bin in my shop.
Dart 2 was with open-bath damper? Is this special edition or what? I have second bike with Dart 2 but it has TurnKey and all Dart forks that i serviced was semi-bath Awesome!😁
Can u pls help me I just remove all allen and After that I cant dettach the housing I cant pull it hard im not sure what will happen if I pull it hard can somebody answer TIA
As in the video, the bottom allen bolts must be turned out only a few millimeters first, then hammered in. This is necessary to unbreak the cone shaped parts inside and make everything loose, so you can just pull out all components. If you cannot hammer the bolts in, try heating the fork leg around the bolt with a hairdrier or heat gun. Be careful, dont make it too hot, that can discolour or burn the paint, etc, just easy. 10-15 seconds heating around, constantly moving the heat not to point towards the same spot will make you able to hammer the bolts in easily! Plus, when you hammer, you should fix the shoulder with a piece of wood to harden the structure and dont make the moving parts take the force away from the hammered bolt.
안녕하세요. 비교적 저렴한 라인의 자전거일 경우 스프링이 내장된 코일샥을 많이 사용하는데요. 성능은 기대하시기 어렵다고 생각됩니다. 아무래도 샥을 조절할 수가 없고 계수가 일정하게 나오다 보니 몸무게가 많이 안 나가시는 라이더 분의 경우는 뻑뻑하게 느껴지실 수 있습니다.
Ich habe jetzt auf meinen E-Bike über 20000 km und bis heute noch nie geputzt die Federung für sowas hätte ich auch keine Zeit weil mein E-Bike muss das ganze Jahr einsatzbereit sein
Excellent ! Thanks so much. I'm restoring a Cannondale mountain bike with Dart 2 turnkey forks. I couldn't have serviced the forks without your help. All went smoothly. Found that the damper wouldn't take the full 20ml of 15wt oil but the forks are now as good as new.
The only thing I miss was I don't have some tools like what you've got. But anyways thanks for the nice and smooth tutorial I think I can manage. Cheers.
Content is excellent for the forks job along with a very very kool music to Cruise through the task at hand.❤
Thank you. The subtitles are very helpful.
I see that this was a year ago. I have a 06 Cannondale Rush and it has a Rock Shock Recon on it from the same year. I like the bike and the shocks. I want to service my shocks and rebuild the shock. “Friends “ tell me I’m wasting my time. Do you think I’m wasting my time with it? I’m in touch with SRAM and they’re getting me a rebuild kit for it so I’ve already crossed that bridge
How did it go, it’s time for a tune up on my recons as well? Did you go through with it was it worth it? How much was the rebuild kit from SRAM?
Also interested how it went, care to give an update?
@@schmarrenheimer80 so I got in touch with SRAM and they got back to me eventually and they had to try to find the rebuild kit. Anything that was found was old stock which was not of original quality therefore not only was it not worth it but it wasn’t even feasible. I dont know if there are any aftermarket companies that might make a build kit but I seriously doubt their are. So it turned out to be such a hassle that it just wasn’t worth it.
@@PatrickKend thank you! I can't seem to find valid parts numbers that are in stock here in Germany either. I'll see if I can do some limited service then, and eventually will replace the whole fork.
@@schmarrenheimer80 good luck with it.
Thank you so much. By the power of the algorithm I found your video, and the Dart looks suspiciously similar to the ~2006 Rockshox J3, for which I cannot find any meaningful instructions.
Hello and thank you for this very professional video. Does the spring side really takes oil from the bottom after reassembly? I could not find this instruction within the service manual and the volume/oil weight table is - - - dashed for the coil side. Isn't the grease soluble by the oil anyway and would end up diluted at the bottom? I'll follow all other parts and hold back on the oil injection in the coil side.
i like how easy he restore the shocks..
보고 배웠네요.
샥은 분해하지 말자로.
Awesome work!! Keep up the goodwork🤗
Hice lo que hiciste pero con diferente herramienta y quebré la rueda del bloqueo 😊
How much oil do forks take or are all forks different?
오래된 다트2스프링샥 정비영상 감사합니다! 마르고 닳도로 써서 정비가 꼭 필요했는데 정말 유용한 영상 감사합니다! 빨간 액체는 유압유겠죠?
What grease is that at 4:02? Shell Rhodina NLGI 1.5?
Thanks. This apply to all rockshox fork?
Thank you for this video
Thankyou for experience about the bike...
Where can I get the service kit, including the outer dust seals?
第一次看到前叉的維修全程我的前叉壞很久了目前找不到維修的師父很是遺憾因為單車跟我很久了
thank you 🤗🚵🤗
Time is always an issue / 어렵지는 않은데.. 역시나 시간이 문제인것 같습니다.
И когда руки не из жопы ростут,когда не чего не умеешь лучше вообще не браться за это! 😉
Professional 💯💯💯
Good job u are magic
start👍👍to ending👏👏👏👏
this was a bunch of help to see how it comes apart etc. i had been using mine locked out all the time and i hit a dip and heard like a snap and the lock out stopped holding at all. i took it apart on the oil side and found a little steel like nipple threaded on one end and put it back into the top lockout section on its bottom was threaded for the nipple so i screwed it back where it came out of and put fresh oil. after all that it didn't work, the lockout doesn't work at all, i wonder if something else broke, Does anyone know what this is?
Nice 👍👍🙂 I like it
great video. thanks a lot!
May i know what kind of paper do you use for wiping the fork. thanks
Hi, may I ask what liquid you use from that spray bottle? Thx
Isopropyl alcohol
@@mattbrilly Thx :)
Kerosene for cleaning is it ok dear?
cba klau dindosia...trtma kta magelang.pasti rmai
Please mention the products descriptions.
Great video!
My compression damper's (at 11:23) lockout function was not working, so I realized that it can be further disassembled. The top end of the grey tube has 2 slots for a 20mm wrench but be very careful because its reverse threaded!
Hgtj
오호 저도 경산쪽 부근?에 사는데 한번 뵙고싶네요!!
Excellent!☀️
덥죠?최대한낮은자세유리?
가만히누워 길다란선풍기눕혀1단만틀어도 에어콘 휴면중이네요~!
이반선풍기는
공기중의더운공기와 모타의뜨거운열기를 합해서 사람에 불어대니
원나참 시원하려고 틀어논것이~~~?
Thanks
How much oil does it need???
Good work keep up 👍
Very good
Greeting unlimited creativity..
Σέ 100mm διαδρομή πόσα εμελ λάδι βάζετε?? Rockshox rekon silver solo air 100mm travel
What were the sprays?
fantastic !
How can I restore the rebound adjustment function? The adjustment knob scrolls in the socket without result. (RS XC 30 TK).
Very Good👍👍👍
What this oil name please tell
Mineral oil
Many oils was used in this video bro
0W30
Red oil
Rock Shox High performance suspension fluid
what was tool you used it?
Got my attention.
skru kecik yang bawah dekat batang black tu dia ada trip ka
Good content…tq
Gr8 job 👏
whats oil you used?
Very good 👍
Good 👍
Why not replace all of the seals?
What’s in the spray bottle?
Isopropyl alcohol. As subs claim
감사합니다 .
Tengo una dart 2 con bloqueo pero al desarmarlo le hacen falta las espumas de los retenes
is this the same for all rockshox coil forks?
Rockshow has a pdf guide that has written specifics for different models. This is a good overview though.
So satisfying
Thanks
TUTTE LE BICI HANNO LE MOLLE DENTRO GLI AMMORTIZZATORI?
Equipment for Cleaning That Please Tell To Me☺️🙂
Wd40
Isopropyl alcohol is usually what’s recommended
Wie heißt dieses Öl?
Where can I buy the background music to play for when i want to get rid of unwanted guests ?
hey, the bg music name is "island" by wiffi carsia, you are welcome.
오일 어떤오일인가요?
락샥 정품 오일 입니다
@@COMETRESTORATION 어디서 사야하나요?
Did you write the background music yourself?
By the way, my Boardman is f**ked.
Coil Or Coil And Air?
what's the name of that oil
sabes como mantemer suspenciones de aire rockshox?
Very sad this doesn't fix all the creaking steer tubes that RockShox released. Scram also leaves all the riders hung out to dry who have this issue. This completely explains why the trash can is labeled Scram warranty bin in my shop.
Is satisfying
Goodjob
Dart 2 was with open-bath damper? Is this special edition or what?
I have second bike with Dart 2 but it has TurnKey and all Dart forks that i serviced was semi-bath
Awesome!😁
I also have dart 2 and version in a video have different stickers than mine, its seems like a japanese or something
Hi, what is the model of the silver metal socket head that you use to remove the shoulder cap. Thanks!
Can u pls help me
I just remove all allen and After that I cant dettach the housing I cant pull it hard im not sure what will happen if I pull it hard can somebody answer TIA
As in the video, the bottom allen bolts must be turned out only a few millimeters first, then hammered in. This is necessary to unbreak the cone shaped parts inside and make everything loose, so you can just pull out all components. If you cannot hammer the bolts in, try heating the fork leg around the bolt with a hairdrier or heat gun. Be careful, dont make it too hot, that can discolour or burn the paint, etc, just easy. 10-15 seconds heating around, constantly moving the heat not to point towards the same spot will make you able to hammer the bolts in easily! Plus, when you hammer, you should fix the shoulder with a piece of wood to harden the structure and dont make the moving parts take the force away from the hammered bolt.
@@martonfeovenyessy ty bro
How to fix New fork мог просто пыльку протереть...
필요했는데 감사합니다
bisa menserviskan fork di mana ini
Caykel er Damta koto...??
The spray:Rata tatatatat! tatatat
Perombakan, Bangun Kembali. perawatan diri di rumah
сам убираися дома если взять Реймон 160е не нужно такого ухода за 4.700€ у меня такой есть велосипед очень офигенный велосипед не жалуюсь ))))
EXCELENTE
알톤 자전거를 새로샀는데을 눌러도 잘 안들어가고 빡빡햬요 불량인가요
안녕하세요.
비교적 저렴한 라인의 자전거일 경우
스프링이 내장된 코일샥을 많이 사용하는데요.
성능은 기대하시기 어렵다고 생각됩니다.
아무래도 샥을 조절할 수가 없고 계수가 일정하게 나오다 보니
몸무게가 많이 안 나가시는 라이더 분의 경우는 뻑뻑하게 느껴지실 수 있습니다.
화면에 나오는 오일 에어샥에 사용해도 돼나요?
락샥 전용오일이므로 락샥 에어샥에도 사용됩니다
10만가자 친구야
덥죠? 개인사정참작
더운공기
는뜨니까 최대한낮은자세
Mantab
Nice
Aapane ismein kaun sa Chanda Hai bataen
Ich habe jetzt auf meinen E-Bike über 20000 km und bis heute noch nie geputzt die Federung für sowas hätte ich auch keine Zeit weil mein E-Bike muss das ganze Jahr einsatzbereit sein
락샥 다트2 락아웃이 안되는 문제가 있는데
댐퍼문제인가요? 락레버밑에 씰링 오링이 끊어지고 고정 핀이부서졌는데 그거 때문일까요?
원인을 몰라 서비스킷을 사야하는지 고민입니다.
아니면 오일량이 모자란건가요?
내부를 확인해봐야 정확하게 일겠지만 오일량이부족할 가능성이 클 것 같습니다
@@COMETRESTORATION 답변감사합니다! 어떤 오일을 사용해야 할까요? 제품명을 알수있을까요
Je pense que je vais changer de fourche pour mettre une fourche rigide. 😅
зачем
Eu tenho uma manitou black 2005 preciso restaurar
누구나는 아니고 앞에 주어를 넣어야 한다. '공구들이 많이 있는 누구나'로
👍👍👌
💯👍
ভাই জায়গাটা কোথায়
I am lahiru. I am from Sri Lanka. I have giant mountains bike. Not available shok absober plastic knob. Please send to me shok absober lock knob
👍🏻👍🏻💯