How to Replace Rear Brake Calipers 2003-2008 Honda Pilot

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ib/1ABCR00982
This video shows you how to install new rear brake calipers from TRQ on your 2003-2008 Honda Pilot. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2003 Honda Pilot
2004 Honda Pilot
2005 Honda Pilot
2006 Honda Pilot
2007 Honda Pilot
2008 Honda Pilot
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obuW/1AXAA00013
• 10mm Wrench 1aau.to/o4i/1AXAA00010
• 14mm Wrench 1aau.to/o4i/1AXAA00010
• 12mm Socket 1aau.to/obJ5/1AXAA00015
• 14mm Socket 1aau.to/obJ5/1AXAA00015
• 19mm Socket 1aau.to/oarq/1AXAA00043
• Ratchet 1aau.to/obNK/1AXAA00016
• Socket Extensions 1aau.to/obJ5/1AXAA00015
• Torque Wrench 1aau.to/oaSx/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oHe/1AXSS00035
• Gloves 1aau.to/oawn/1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oago/1AXAA00068
• Jack Stands 1aau.to/o4S/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@alexandercuello3168]

Great video, thanks for sharing!

[@gabrielguevara7895]

Looks easy peasy. I would have issues with the fluid and bleeding part.

[@HeavenlyJWM69]

What if the valve is not bleeding

[@mannyman874]

Slider keeps spinning when tightening the bolts.