How to Replace Install Front Brakes 03-08 Honda Pilot
Вставка
- Опубліковано 8 сер 2017
- Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS00022
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 03, 04, 05, 06, 07, 08 Honda Pilot.
This process should be similar on the following vehicles:
2003 Honda Pilot
2004 Honda Pilot
2005 Honda Pilot
2006 Honda Pilot
2007 Honda Pilot
2008 Honda Pilot
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oer/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oer/1AXAA00013
• Pry Bar 1aau.to/oaT/1AXAA00020
• 12mm Wrench 1aau.to/oaU/1AXAA00010
• 17mm Wrench 1aau.to/oaU/1AXAA00010
• 21mm wrench
• 12mm Socket 1aau.to/od6/1AXAA00015
• 17mm Socket 1aau.to/od6/1AXAA00015
• 19mm Socket 1aau.to/obA/1AXAA00043
• 21mm Socket 1aau.to/obA/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/oP/1AXAA00078
• Ratchet 1aau.to/oeI/1AXAA00016
• Socket Extensions 1aau.to/od6/1AXAA00015
• Torque Wrench 1aau.to/ocm/1AXAA00044
• Anti-Seize Grease
• Bungee Cord
• Gloves 1aau.to/oS/1AXSS00048
• Safety Glasses 1aau.to/oL/1AXAA00343
• Floor Jack 1aau.to/oa9/1AXAA00068
• Jack Stands 1aau.to/oa3/1AXAA00065
• Large C-Clamp
• Rubber Mallet 1aau.to/os/1AXAA00413
• Wire Brush 1aau.to/oT/1AXAA00079
Subscribe: / @1aauto
Check out our playlist:
Honda Pilot 2003-2008 1st Generation: • Honda Pilot 2003-2008 ...
For More Info visit us at 1aau.to/h/fW/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Calmly and Systematically explained. A novice could do this with your cogent description. Kudos Romans 10:9
Thank you for taking the time to make such a high quality DIY video! Your tips and tricks are worth their weight in gold!
+David Mosley Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Very straightforward and clear video. Thanks for taking the time to make it.
Contemplated having the front a rear brakes and rotors done at my local repair shop. Price quote of $500. Purchased the parts for less than $200 and watched this video and 1A Auto’s rear brake replacement video a few times. Excellent instructional videos, completed job and save approx: $300.00, thank you 1A Auto!!!!!!!!!!!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Winvoices Winvoices
Really appreciate the details like adding the grease to the slide pins and torques
Great Video: lighting, audio, explanation. Thanks!
was there no need in taking your master cylinder cover off while pressing the caliper piston back in?
Thanks for the Video, it was very informative.
Great video, helped a lot! Thanks for helping me save some bucks.
Excellent DIY video! Very clear on everything
+Lake Havasu H2o Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Thanks. Just bought an '03 . Got to get them changed out .
Thanks for checking us out. 1aauto.com
Excellent, pro-level detailed vid
+Craig Dyer Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2003-08-honda-pilot-brake-pad-and-rotor-kit-nakamoto-md914%2c-31275/i/1abfs00022?UA-cam&CTA+Comment&E06t36UfjI
This video was a huge help. Thank you!
+Cj Keeney Thank you for your positive feedback! We are happy we could help.
If you about to DIY you may as well do it the right way. Lube those caliber bolts whether it needs it or not because your next pads change won't be another 40K miles and that is a long time.
Thank you for this extra info...super helpful!
Great video! Very helpful!
+Daniel McCarty Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
excellent DIY
Just changed mine and it was exactly like this awesome, clear, well done video!
+Chris Hubbard Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Your video made it simple as 123.
Great vid much appreciated!
+M. Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Nice video. Thank you!
YES!!!!! Thank You ALOT!!!!
SO MUCH!!!!
This was EXTREMELY Helpful.
Your vide helped me out ALOT!!!!
+Promise Land Network Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Thx for sharing this super nice 7star video
+Tj Singh Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Super helpful sir, thank you
+carlos vazques Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Love your vids. You helped me with my Mazda 6 and now with my 1st Gen Pilot. Gotta love that New England salt. Body's rotting off but my brakes are A-OK!😂
+Randy Rawding II Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
@@1AAuto I do, I do 😃 You guys have pretty good quality suspension parts, IMO.
Thanks man! Is it bad that when i compressed the piston something was leaking near the engine?
Do themes screws need to be taken off the rotor for it to come off or is my rotor just that rusted
I noticed those pads had the spring holes, are the springs not important?
I have the pads with the wear indicator on the outside is that okay? They still fit perfectly
No big deal
No anti-seize for the hub no grease for the pins. No grease for the slides. Just a couple things you missed.
Great video, Do the new rotors need to be turned down or checked before installation?
No
Front brake caliper bolts 80ft lb
Rear caliper bolts 41ft lb
Caliper pins are 27ft lb
Yw.
I’m just here for the torque specs… thanks
What size c clamp do I need!
+marco martinez The how to just states Large C Clamp:
General Tools
Floor Jack
Jack Stands
Large C-Clamp
Rubber Mallet
Wire Brush
What if you can’t get the 12mm bolt off after you have gotten the tire off.?
+Tyree mendez Normally that isn't an issue.
same prob
What if i dont have a torque wrench? Is there a second way?
+Christian Guerrero you might be able to borrow/rent one from a tool store. It's recommended to get a torque wrench to ensure proper torque on all bolts
I been working on cars for 20 years. Only time I used a torque wrench was when rebuilding an engine.
@@stevenmalvasio5639 LOL Came to say the same!
I put the new brakes on but my caliper won’t fit back on what do I do ?
+Israel Torres We wouldn't be able to help with that here, you may want to have a local mechanic take a look at it. Please be sure the caliper is all the way compressed. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You didn’t mention to make sure the hub is completely clean of rust and dirt on the mounting surface or the rotor could wobble. Also if you don’t replace the retaining screws when you change rotors a bit of rust or dirt can fall in between the hub and rotor and be trapped in there?
+Ron Laduke Thanks for the tip! We'll pass this info along to our production team.
Why wouldn't you clean and re grease the slides with new grease?
To prevent the caliper from seizing in the bracket.
At 27 ft/lbs my caliper pin screw broke x2.
I'm never paying someone to do this again. Question: Is there any benefit to cleaning the caliper? It looked so dirty and rusty next to that new rotor.
I just wanted to clean it so bad while you were lifting it.
+Lost Below The Fold Thanks for watching! Other than cleaning the caliper clips and slide pins there is no real benefit to cleaning the caliper itself. It just looks a bit nicer! 1aauto.com
No better time to clean it wouldn’t hurt
You didn't grease the back of the pads, how one ?
Why not ?
Video part 3:41 was not very clear...you are showing hitting the wrench downward on the top caliper bolt (17mm). Next time, i think it's better to mention the direction to loosen the bolts. Other than that, Great video. Thanks
Well common sense says Righty tighty lefty loose
@@seanklotzbach1090common sense ain’t common
You didn't even take rotor screws out, that's only reason i was watching video lol
+David Sandine Thanks for the feedback!
@@1AAuto Agreed, the rotor screws are the biggest issue when replacing rotors as a DIY project. How do you recommend freeing up those pesky screws that don't want to come out?
@@epicace102 Hammer drill with proper bit should do the trick. Those bolts suck so bad.
My piston won't go back into the caliper. Works fine on my right front brake but having issues with the left front brake. Help?
David Stapleford usually sign that caliper piston is binding. Time to replace it.
Or he's not using a c clamp.
I noticed that you did not put those rotor screws....
+frata01 Thank you for checking us out. The two center rotor screws are not a necessity, and are used for manufacturing purposes at the factory. The use of the caliper pressure, and the lug nuts torque will keep the rotor in place. 1aauto.com
You have to wipe the cleaner off or it just evaporates and leaves the contaminates right where they were.
The brake hardware is cheap enough, just replace it
+Richard Clark Thanks for checking us out! 1AAuto.com